cpwVcOutboundVcLabel

CISCO-IETF-PW-MIB · .1.3.6.1.4.1.9.10.106.1.2.1.19

Object

column r/w SNMPv2-SMIUnsigned32

The VC label used in the outbound direction (i.e. toward  
the PSN). It may be set up manually if owner is 'manual' or  
automatically otherwise. Examples: For MPLS PSN, it  
represents the 20 bits of VC tag, for L2TP it represent the 
32 bits Session ID. 
If the label is not yet known (signaling in process), the  
object should return a value of 0xFFFF.

Context

MIB: CISCO-IETF-PW-MIB
OID: .1.3.6.1.4.1.9.10.106.1.2.1.19
Type: column
Access: readwrite
Status: current
Parent: cpwVcEntry
Table: cpwVcTable
Siblings: 31

Syntax

SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cpwVcIndex Index for the conceptual row identifying a VC within this PW Emulation VC table.	column	CISCO-IETF-PW-TC-MIBCpwVcIndexType	`.1.3.6.1.4.1.9.10.106.1.2.1.1`
cpwVcID Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP.	column	CISCO-IETF-PW-TC-MIBCpwVcIDType	`.1.3.6.1.4.1.9.10.106.1.2.1.10`
cpwVcLocalGroupID Used in the Group ID field sent to the peer PWES within the maintenance protocol used for VC setup, zero if not used.	column	CISCO-IETF-PW-TC-MIBCpwGroupID	`.1.3.6.1.4.1.9.10.106.1.2.1.11`
cpwVcControlWord Define if the control word will be sent with each packet by the local node.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.106.1.2.1.12`
cpwVcLocalIfMtu If not equal zero, the optional IfMtu object in the maintenance protocol will be sent with this value, representing the locally supported MTU size over the interface (or the…	column	Unsigned32	`.1.3.6.1.4.1.9.10.106.1.2.1.13`
cpwVcLocalIfString Each VC is associated to an interface (or a virtual interface) in the ifTable of the node as part of the service configuration. This object defines if the maintenance protoco…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.106.1.2.1.14`
cpwVcRemoteGroupID Obtained from the Group ID field as received via the maintenance protocol used for VC setup, zero if not used. Value of 0xFFFF shall be used if the object is yet to be defin…	column	CISCO-IETF-PW-TC-MIBCpwGroupID	`.1.3.6.1.4.1.9.10.106.1.2.1.15`
cpwVcRemoteControlWord If maintenance protocol is used for VC establishment, this parameter indicates the received status of the control word usage, i.e. if packets will be received with control wor…	column	Enumeration	`.1.3.6.1.4.1.9.10.106.1.2.1.16`
cpwVcRemoteIfMtu The remote interface MTU as (optionally) received from the remote node via the maintenance protocol. Should be zero if this parameter is not available or not used.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.106.1.2.1.17`
cpwVcRemoteIfString Indicate the interface description string as received by the maintenance protocol, MUST be NULL string if not applicable or not known yet.	column	OctetString	`.1.3.6.1.4.1.9.10.106.1.2.1.18`
cpwVcType This value indicate the service to be carried over this VC. Note: the exact set of VC types is yet to be worked out by the WG.	column	CISCO-IETF-PW-TC-MIBCpwVcType	`.1.3.6.1.4.1.9.10.106.1.2.1.2`
cpwVcInboundVcLabel The VC label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS …	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.106.1.2.1.20`
cpwVcName The canonical name assigned to the VC.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.10.106.1.2.1.21`
cpwVcDescr A textual string containing information about the VC. If there is no description this object contains a zero length string.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.10.106.1.2.1.22`
cpwVcCreateTime System time when this VC was created.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.10.106.1.2.1.23`
cpwVcUpTime Number of consecutive ticks this VC has been 'up' in both directions together (i.e. 'up' is observed in cpwVcOperStatus.)	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.9.10.106.1.2.1.24`
cpwVcAdminStatus The desired operational status of this VC.	column	Enumeration	`.1.3.6.1.4.1.9.10.106.1.2.1.25`
cpwVcOperStatus Indicates the actual combined operational status of this VC. It is 'up' if both cpwVcInboundOperStatus and cpwVcOutboundOperStatus are in 'up' state. For all other values, i…	column	CISCO-IETF-PW-TC-MIBCpwOperStatus	`.1.3.6.1.4.1.9.10.106.1.2.1.26`
cpwVcInboundOperStatus Indicates the actual operational status of this VC in the inbound direction. - down: if PW signaling has not yet finished, or indica…	column	CISCO-IETF-PW-TC-MIBCpwOperStatus	`.1.3.6.1.4.1.9.10.106.1.2.1.27`
cpwVcOutboundOperStatus Indicates the actual operational status of this VC in the outbound direction - down: if PW signaling has not yet finished, or indications available…	column	CISCO-IETF-PW-TC-MIBCpwOperStatus	`.1.3.6.1.4.1.9.10.106.1.2.1.28`
cpwVcTimeElapsed The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the sys…	column	Integer32	`.1.3.6.1.4.1.9.10.106.1.2.1.29`
cpwVcOwner Set by the operator to indicate the protocol responsible for establishing this VC. Value 'manual' is used in all cases where no maintenance protocol (PW signaling) is used to…	column	Enumeration	`.1.3.6.1.4.1.9.10.106.1.2.1.3`
cpwVcValidIntervals The number of previous 15-minute intervals for which data was collected. An agent with PW capability must be capable of supporting at least n intervals. The minimum value of …	column	Integer32	`.1.3.6.1.4.1.9.10.106.1.2.1.30`
cpwVcRowStatus For creating, modifying, and deleting this row.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.10.106.1.2.1.31`
cpwVcStorageType This variable indicates the storage type for this object.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.9.10.106.1.2.1.32`
cpwVcPsnType Set by the operator to indicate the PSN type on which this VC will be carried. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB …	column	Enumeration	`.1.3.6.1.4.1.9.10.106.1.2.1.4`
cpwVcSetUpPriority This object define the relative set-up priority of the VC in a lowest-to-highest fashion, where 0 is the highest priority. VCs with the same priority are treated with equal …	column	Integer32	`.1.3.6.1.4.1.9.10.106.1.2.1.5`
cpwVcHoldingPriority This object define the relative holding priority of the VC in a lowest-to-highest fashion, where 0 is the highest priority. VCs with the same priority are treated with equal…	column	Integer32	`.1.3.6.1.4.1.9.10.106.1.2.1.6`
cpwVcInboundMode This object is used to enable greater security for implementation that use per platform VC label space. In strict mode, packets coming from the PSN are accepted only from tu…	column	Enumeration	`.1.3.6.1.4.1.9.10.106.1.2.1.7`
cpwVcPeerAddrType Denotes the address type of the peer node maintenance protocol (signaling) address if PW maintenance protocol is used for the VC creation. It should be set to 'unknown' if PE/…	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.10.106.1.2.1.8`
cpwVcPeerAddr This object contains the value of of the peer node address of the PW/PE maintenance protocol entity. This object should contain a value of 0 if not relevant (manual configura…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.10.106.1.2.1.9`