cpwVcDescr
CISCO-IETF-PW-MIB ·
.1.3.6.1.4.1.9.10.106.1.2.1.22
Object
A textual string containing information about the VC. If there is no description this object contains a zero length string.
Context
- MIB
- CISCO-IETF-PW-MIB
- OID
.1.3.6.1.4.1.9.10.106.1.2.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cpwVcEntry
- Table
- cpwVcTable
- Siblings
- 31
Syntax
SNMP-FRAMEWORK-MIBSnmpAdminString
- Source
- SNMP-FRAMEWORK-MIBSnmpAdminString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpwVcIndex Index for the conceptual row identifying a VC within
this PW Emulation VC table. | column | CISCO-IETF-PW-TC-MIBCpwVcIndexType | .1.3.6.1.4.1.9.10.106.1.2.1.1 |
| cpwVcID Used in the outgoing VC ID field within the 'Virtual
Circuit FEC Element' when LDP signaling is used or PW ID
AVP for L2TP. | column | CISCO-IETF-PW-TC-MIBCpwVcIDType | .1.3.6.1.4.1.9.10.106.1.2.1.10 |
| cpwVcLocalGroupID Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for VC setup,
zero if not used. | column | CISCO-IETF-PW-TC-MIBCpwGroupID | .1.3.6.1.4.1.9.10.106.1.2.1.11 |
| cpwVcControlWord Define if the control word will be sent with each packet by
the local node. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.106.1.2.1.12 |
| cpwVcLocalIfMtu If not equal zero, the optional IfMtu object in the
maintenance protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the… | column | Unsigned32 | .1.3.6.1.4.1.9.10.106.1.2.1.13 |
| cpwVcLocalIfString Each VC is associated to an interface (or a virtual
interface) in the ifTable of the node as part of the
service configuration. This object defines if the
maintenance protoco… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.106.1.2.1.14 |
| cpwVcRemoteGroupID Obtained from the Group ID field as received via the
maintenance protocol used for VC setup, zero if not used.
Value of 0xFFFF shall be used if the object is yet to be
defin… | column | CISCO-IETF-PW-TC-MIBCpwGroupID | .1.3.6.1.4.1.9.10.106.1.2.1.15 |
| cpwVcRemoteControlWord If maintenance protocol is used for VC establishment, this
parameter indicates the received status of the control word
usage, i.e. if packets will be received with control wor… | column | Enumeration | .1.3.6.1.4.1.9.10.106.1.2.1.16 |
| cpwVcRemoteIfMtu The remote interface MTU as (optionally) received from the
remote node via the maintenance protocol. Should be zero if
this parameter is not available or not used. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.106.1.2.1.17 |
| cpwVcRemoteIfString Indicate the interface description string as received by
the maintenance protocol, MUST be NULL string if not
applicable or not known yet. | column | OctetString | .1.3.6.1.4.1.9.10.106.1.2.1.18 |
| cpwVcOutboundVcLabel The VC label used in the outbound direction (i.e. toward
the PSN). It may be set up manually if owner is 'manual' or
automatically otherwise. Examples: For MPLS PSN, it
repr… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.106.1.2.1.19 |
| cpwVcType This value indicate the service to be carried over
this VC.
Note: the exact set of VC types is yet to be worked
out by the WG. | column | CISCO-IETF-PW-TC-MIBCpwVcType | .1.3.6.1.4.1.9.10.106.1.2.1.2 |
| cpwVcInboundVcLabel The VC label used in the inbound direction (i.e. packets
received from the PSN. It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.106.1.2.1.20 |
| cpwVcName The canonical name assigned to the VC. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.10.106.1.2.1.21 |
| cpwVcCreateTime System time when this VC was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.106.1.2.1.23 |
| cpwVcUpTime Number of consecutive ticks this VC has been 'up' in
both directions together (i.e. 'up' is observed in
cpwVcOperStatus.) | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.10.106.1.2.1.24 |
| cpwVcAdminStatus The desired operational status of this VC. | column | Enumeration | .1.3.6.1.4.1.9.10.106.1.2.1.25 |
| cpwVcOperStatus Indicates the actual combined operational status of this
VC. It is 'up' if both cpwVcInboundOperStatus and
cpwVcOutboundOperStatus are in 'up' state. For all other
values, i… | column | CISCO-IETF-PW-TC-MIBCpwOperStatus | .1.3.6.1.4.1.9.10.106.1.2.1.26 |
| cpwVcInboundOperStatus Indicates the actual operational status of this VC in the
inbound direction.
- down: if PW signaling has not yet finished, or
indica… | column | CISCO-IETF-PW-TC-MIBCpwOperStatus | .1.3.6.1.4.1.9.10.106.1.2.1.27 |
| cpwVcOutboundOperStatus Indicates the actual operational status of this VC in the
outbound direction
- down: if PW signaling has not yet finished, or
indications available… | column | CISCO-IETF-PW-TC-MIBCpwOperStatus | .1.3.6.1.4.1.9.10.106.1.2.1.28 |
| cpwVcTimeElapsed The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason, such as an
adjustment in the sys… | column | Integer32 | .1.3.6.1.4.1.9.10.106.1.2.1.29 |
| cpwVcOwner Set by the operator to indicate the protocol responsible
for establishing this VC. Value 'manual' is used in all
cases where no maintenance protocol (PW signaling) is used
to… | column | Enumeration | .1.3.6.1.4.1.9.10.106.1.2.1.3 |
| cpwVcValidIntervals The number of previous 15-minute intervals
for which data was collected.
An agent with PW capability must be capable of supporting at
least n intervals. The minimum value of … | column | Integer32 | .1.3.6.1.4.1.9.10.106.1.2.1.30 |
| cpwVcRowStatus For creating, modifying, and deleting this row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.106.1.2.1.31 |
| cpwVcStorageType This variable indicates the storage type for this
object. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.10.106.1.2.1.32 |
| cpwVcPsnType Set by the operator to indicate the PSN type on which this
VC will be carried. Based on this object, the relevant PSN
table entries are created in the in the PSN specific MIB … | column | Enumeration | .1.3.6.1.4.1.9.10.106.1.2.1.4 |
| cpwVcSetUpPriority This object define the relative set-up priority of the VC
in a lowest-to-highest fashion, where 0 is the highest
priority. VCs with the same priority are treated with
equal … | column | Integer32 | .1.3.6.1.4.1.9.10.106.1.2.1.5 |
| cpwVcHoldingPriority This object define the relative holding priority of the VC
in a lowest-to-highest fashion, where 0 is the highest
priority. VCs with the same priority are treated with
equal… | column | Integer32 | .1.3.6.1.4.1.9.10.106.1.2.1.6 |
| cpwVcInboundMode This object is used to enable greater security for
implementation that use per platform VC label space. In
strict mode, packets coming from the PSN are accepted only
from tu… | column | Enumeration | .1.3.6.1.4.1.9.10.106.1.2.1.7 |
| cpwVcPeerAddrType Denotes the address type of the peer node maintenance
protocol (signaling) address if PW maintenance protocol is
used for the VC creation. It should be set to
'unknown' if PE/… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.10.106.1.2.1.8 |
| cpwVcPeerAddr This object contains the value of of the peer node address
of the PW/PE maintenance protocol entity. This object
should contain a value of 0 if not relevant (manual
configura… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.10.106.1.2.1.9 |