CISCO-ENTITY-REDUNDANCY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
41

ceRedunGroupTypesTable

table
.1.3.6.1.4.1.9.9.498.1.1.1 · 1 row entry · 7 columns
Open in standard view 
This table lists the basic types of redundancy groups 
supported on the managed device along with additional 
information about each group type.
ceRedunGroupTypesEntry entry .1.3.6.1.4.1.9.9.498.1.1.1.1
A conceptual row in the ceRedunGroupTypesTable.
Indexes
ceRedunGroupTypeIndex
Column Syntax OID
ceRedunGroupTypeIndex
An index assigned for each type of redundancy group supported
on a managed system that requires its own table listing
entPhysicalVendorTypes allowed as members for its groups.

For instance, port groups …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.1.1.1.1
ceRedunGroupTypeName
The textual name of the redundancy group type. The value
of this object should be the name of the redundancy group
type assigned by the local device as it would appear
for display commands entered at the device's `con…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.498.1.1.1.1.2
ceRedunGroupCounts
The current count of redundancy groups for a specific
ceRedunGroupTypeIndex. This count indicates the number
of rows in the ceRedunGroupTable for a specific
ceRedunGroupTypeIndex.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.1.1.1.3
ceRedunNextUnusedGroupIndex
The next unused group index available for configuring
a new redundancy group for this group type.

In order to avoid unnecessary collisions between competing
management stations, `adjacent' retrievals of…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.1.1.1.4
ceRedunMaxMbrsInGroup
The maximum number of primary plus secondary members allowed
in a group for a specific ceRedunGroupTypeIndex. If only
1:1 or 1+1 is supported, this should be 2.

If the maximum number is unknown or not det…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.1.1.1.5
ceRedunUsesGroupName
Boolean to indicate whether this type of redundancy group
uses the ceRedunGroupString object as a group name
identifier. If it is reported as 'true', the
ceRedunGroupString name must contain no internal spaces.
…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.498.1.1.1.1.6
ceRedunGroupDefinitionChanged
The value of sysUpTime when there was the most recent change
to any objects in the ceRedunGroupTypesTable except for
ceRedunGroupCounts or ceRedunNextUnusedGroupIndex.
The sysUpTime should also reflect changes to either…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.498.1.1.1.1.7

ceRedunVendorTypesTable

table
.1.3.6.1.4.1.9.9.498.1.1.2 · 1 row entry · 1 columns
Open in standard view 
This table lists all entPhysicalVendorTypes allowed as
members for a specific ceRedunGroupTypeIndex on the 
managed device, inclusive for all configurable values for 
ceRedunType, ceRedunScope, ceRedunArch, etc.
          
If the ceRedunGroupDefinitionChanged object changes for
a particular ceRedunGroupTypeIndex, then this table may 
have changed and should be read again.
                 
Note: Although a specific ceRedunGroupTypeIndex may allow
groups of different entPhysicalVendorTypes, managed devices 
typically enforce all members within a specific group to 
have the same entPhysicalVendorType.
ceRedunVendorTypesEntry entry .1.3.6.1.4.1.9.9.498.1.1.2.1
A conceptual row in the ceRedunVendorTypesTable.
Indexes
ceRedunGroupTypeIndex ceRedunVendorType
Column Syntax OID
ceRedunVendorType
Each row lists a specific entPhysicalVendorType which is
allowed as a member for groups of the type specified by
the ceRedunGroupTypeIndex.

Note: Normally an index object would have MAX-ACCESS of
not-ac…
SNMPv2-TCAutonomousType
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.6.1.4.1.9.9.498.1.1.2.1.1

ceRedunInternalStatesTable

table
.1.3.6.1.4.1.9.9.498.1.1.3 · 1 row entry · 3 columns
Open in standard view 
This table allows the managed system to report a read-only 
list of internal state numbers and the corresponding 
descriptions which apply for the members of a particular 
redundancy group type.
          
If the ceRedunGroupDefinitionChanged object changes for
a particular ceRedunGroupTypeIndex, then this table may 
have changed and should be read again.
ceRedunInternalStatesEntry entry .1.3.6.1.4.1.9.9.498.1.1.3.1
A conceptual row in the ceRedunInternalStatesTable.
Indexes
ceRedunGroupTypeIndex ceRedunInternalStateIndex
Column Syntax OID
ceRedunInternalStateIndex
This is an index corresponding to an internal state of a
member for a redundancy group of type ceRedunGroupTypeIndex.
The state may include any of the initialization or
intermediate progression states necessary to rea…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.1.3.1.1
ceRedunStateCategory
This places the specific internal state into one of several
categories of internal states which are significant for
redundancy.
CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunStateCategories
Textual Convention: CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunStateCategories Enumeration
Type Values:
1other
2disabled
3inactive
4failed
5initializing
6negotiation
7activeOther
8activeImageInitialize
9activeConfigInitialize
10activeRunStateInitialize
11activeFromStandbyTransition
12activeReconciliation
13activeWait
14active
15standbyOther
16standbyImageInitialize
17standbyConfigInitialize
18standbyRunStateInitialize
19standbyReconciliation
20standbyWait
21standbyColdFinal
22standbyWarmFinal
23standbyHotFinal
24standbySwitchingToActive
 .1.3.6.1.4.1.9.9.498.1.1.3.1.2
ceRedunInternalStateDescr
This is a string description for the specific internal
member state.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.498.1.1.3.1.3

ceRedunSwitchoverReasonTable

table
.1.3.6.1.4.1.9.9.498.1.1.4 · 1 row entry · 3 columns
Open in standard view 
This table allows the managed system to report a read-only 
list of switchover reason indexes and the corresponding 
descriptions.
          
If the ceRedunGroupDefinitionChanged object changes for
a particular ceRedunGroupTypeIndex, then this table may 
have changed and should be read again.
ceRedunSwitchoverReasonEntry entry .1.3.6.1.4.1.9.9.498.1.1.4.1
A conceptual row in the ceRedunSwitchoverReasonTable.
Indexes
ceRedunGroupTypeIndex ceRedunSwitchoverReasonIndex
Column Syntax OID
ceRedunSwitchoverReasonIndex
This is an index corresponding to a switchover reason code.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.1.4.1.1
ceRedunReasonCategory
This categorizes the specific switchover reason into one
of several categories.
CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunReasonCategories
Textual Convention: CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunReasonCategories Enumeration
Type Values:
1other
2unsupported
3notKnown
4userManual
5userForced
6userLockout
7activeMbrFailed
8activeMbrRemoved
9activeMbrDisabled
10revertiveSwitchover
11remoteRequest
 .1.3.6.1.4.1.9.9.498.1.1.4.1.2
ceRedunSwitchoverReasonDescr
This is a string description for the specific switchover
reason.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.498.1.1.4.1.3

ceRedunGroupTable

table
.1.3.6.1.4.1.9.9.498.1.1.6 · 1 row entry · 10 columns
Open in standard view 
This table lists group configuration and status objects
for a specific redundancy group. However, the members are 
configured separately in the ceRedunMbrTable.
ceRedunGroupEntry entry .1.3.6.1.4.1.9.9.498.1.1.6.1
A conceptual row in the ceRedunGroupTable.
Indexes
ceRedunGroupTypeIndex ceRedunGroupIndex
Column Syntax OID
ceRedunGroupIndex
A group number assigned to a particular redundancy group.
A group consists of one or more primary members which are
protected by one or more secondary members.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.1.6.1.1
ceRedunGroupString
If ceRedunUsesGroupName is 'true' for this redundancy group
type, this object is a group name identifier and the value
of this object has to be specified and should contain no
internal spaces when configuring this grou…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.498.1.1.6.1.2
ceRedunGroupRedunType
The intended type of redundancy protection such as 'yCable'
or 'aps' for this redundancy group.
CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunTyper/w
Textual Convention: CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunType Enumeration
Type Values:
1other
2yCable
3aps
4featureCard
5externalSwitch
6slotPair
7cmts
 .1.3.6.1.4.1.9.9.498.1.1.6.1.3
ceRedunGroupScope
This object determines the local/remote scope of the
redundancy group.

This object may not be modified if the associated
ceRedunGroupRowStatus object is equal to active(1).
CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunScoper/w
Textual Convention: CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunScope Enumeration
Type Values:
1other
2local
3remoteChassis
4remoteSystem
 .1.3.6.1.4.1.9.9.498.1.1.6.1.4
ceRedunGroupArch
The architecture of the redundancy group, such as
1:1 or 1:n, etc.

This object may not be modified if the associated
ceRedunGroupRowStatus object is equal to active(1).
CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunArchr/w
Textual Convention: CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunArch Enumeration
Type Values:
1other
2oneToOne
3onePlusOne
4oneToN
5mToN
6loadSharing
 .1.3.6.1.4.1.9.9.498.1.1.6.1.5
ceRedunGroupRevert
The revertive mode of the redundancy group.

nonrevertive(1)

The secondary member remains active until another
switchable event takes place.

revertive(2)

When t…
Enumerationr/w
Enumerated Values:
1nonrevertive
2revertive
 .1.3.6.1.4.1.9.9.498.1.1.6.1.6
ceRedunGroupWaitToRestore
The Wait To Restore period in seconds. This object is
only applicable to groups which are configured as revertive
and does not need to be instantiated for groups which
are non-revertive.

After clearing o…
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.1.6.1.7
ceRedunGroupDirection
This object is applicable only for those types of redundancy
such as APS where switchovers can take place independently at
near and far ends of a pair of interconnecting links and does
not need to be instantiated for o…
Enumerationr/w
Enumerated Values:
1unidirectional
2bidirectional
 .1.3.6.1.4.1.9.9.498.1.1.6.1.8
ceRedunGroupStorageType
The storage type for this conceptual row. By default,
the row will not be saved into non-volatile memory
unless this object is set to the value nonVolatile.

Note: Conceptual rows having the value 'readOnl…
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.9.498.1.1.6.1.9
ceRedunGroupRowStatus
The configuration status of this redundancy group entry.

An entry may not exist in the active RowStatus state
unless all configurable read-create objects in the entry
have an appropriate value.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.498.1.1.6.1.10

ceRedunMbrConfigTable

table
.1.3.6.1.4.1.9.9.498.1.2.2 · 1 row entry · 8 columns
Open in standard view 
This table lists the group members and generic redundancy
objects which are associated with configuring redundancy 
group members.
          
The switchover granularity should be for one member at a 
time.  In other words if a member is allowed to be an 
individual port, then switchovers on multi-port linecards 
would be expected to take place independently for each 
port on the linecard.  But if the members are full linecards,
then all ports on the linecard would be expected to switch
at the same time.
ceRedunMbrConfigEntry entry .1.3.6.1.4.1.9.9.498.1.2.2.1
A conceptual row in the ceRedunMbrConfigTable.
Indexes
ceRedunGroupTypeIndex ceRedunGroupIndex ceRedunMbrNumber
Column Syntax OID
ceRedunMbrNumber
This field should be assigned as a unique member number
within a redundancy group. The value 0 always indicates a
secondary member. Primary members should have numbers
which are higher than secondary members.
…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.2.2.1.1
ceRedunMbrPhysIndex
This field specifies the entity PhysicalIndex which is being
configured as a redundancy member.

It is the responsibility of the managed device to enforce
any restrictions on matching entPhysicalVendorTyp…
ENTITY-MIBPhysicalIndexr/w
Textual Convention: ENTITY-MIBPhysicalIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.498.1.2.2.1.2
ceRedunMbrMode
This field is set to the 'primary' (working) or
'secondary' (protection) role within the redundancy group.
The designation as 'primary' or 'secondary' is configured
and is static. It doesn't change due to a switchover.
CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunModer/w
Textual Convention: CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunMode Enumeration
Type Values:
1primary
2secondary
 .1.3.6.1.4.1.9.9.498.1.2.2.1.3
ceRedunMbrAddressType
This field specifies the type of address used for the
ceRedunMbrAddress object. It does not need to be
instantiated when the ceRedunGroupScope value is
'remoteSystem' or 'remoteChassis'.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.498.1.2.2.1.4
ceRedunMbrRemoteAddress
This field specifies the remote management address of the
shelf or system where the peer member is expected to be
configured. It does not need to be instantiated when the
ceRedunGroupScope value is 'remoteSystem' or …
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.498.1.2.2.1.5
ceRedunMbrPriority
The priority of the member. For 1:n architectures if
the secondary member has already become active for
a primary member with a lower priority, it can instead
take over for a different primary member if that member
ha…
Enumerationr/w
Enumerated Values:
1low
2high
 .1.3.6.1.4.1.9.9.498.1.2.2.1.6
ceRedunMbrStorageType
The storage type for this conceptual row. By default,
the row will not be saved into non-volatile memory
unless this object is set to the value nonVolatile.

Note: Conceptual rows having the value 'readOnl…
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.9.498.1.2.2.1.8
ceRedunMbrRowStatus
The configuration status of this member entry.

A row in the ceRedunMbrConfigTable may not be created,
deleted, or set to notInService if the associated
ceRedunGroupRowStatus object is equal to active. How…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.498.1.2.2.1.9

ceRedunMbrStatusTable

table
.1.3.6.1.4.1.9.9.498.1.2.4 · 1 row entry · 7 columns
Open in standard view 
This table lists the redundancy status and other read-only
redundancy objects which are associated with redundancy 
group members.
          
Status associated with member alarm conditions should be
reported separately using the CISCO-ENTITY-ALARM-MIB.
ceRedunMbrStatusEntry entry .1.3.6.1.4.1.9.9.498.1.2.4.1
A conceptual row in the ceRedunMbrStatusTable.
Indexes
No indexes recorded
Column Syntax OID
ceRedunMbrStatusCurrent
Indicates the current status bitflags for the member.
CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunMbrStatus
Textual Convention: CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunMbrStatus Bits
Type Values:
0protectionLockedOut
1degraded
2failure
3standby
4protectionProvided
5forcedStandby
6manualStandby
 .1.3.6.1.4.1.9.9.498.1.2.4.1.1
ceRedunMbrProtectingMbr
This field is valid only for a secondary member. When the
secondary member is active, this value indicates the
primary member it has taken over for. When the secondary
member is standby, it should return its own member…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.2.4.1.2
ceRedunMbrInternalState
This is the current internal state index for a member.
The corresponding state category and description can be
found in the ceRedunInternalStatesTable.

It may include any of the initialization or interme…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.2.4.1.3
ceRedunMbrSwitchoverCounts
The number of times this primary or secondary member has
changed from being active to being standby due to
a switchover. The counter should monotonically increase
but never wrap or decrease, except at a system restar…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.2.4.1.4
ceRedunMbrLastSwitchover
The value of sysUpTime when this primary member last
completed a switchover to the secondary member. If this
member has never switched to standby, or this is a
secondary member, the value 0 should be returned.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.498.1.2.4.1.5
ceRedunMbrSwitchoverReason
The reported reason code for the last switchover.
The corresponding reason category and description can
be found from the ceRedunSwitchoverReasonTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.498.1.2.4.1.6
ceRedunMbrSwitchoverSeconds
The cumulative switching duration time in seconds. For a
primary member, this is the cumulative number of seconds that
service was carried by the secondary member. For the secondary
member, this is the cumulative num…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.498.1.2.4.1.8

ceRedunCommandTable

table
.1.3.6.1.4.1.9.9.498.1.3 · 1 row entry · 2 columns
Open in standard view 
This table allows switchover commands to be sent to members of
configured redundancy groups.
ceRedunCommandEntry entry .1.3.6.1.4.1.9.9.498.1.3.1
A conceptual row in the ceRedunCommandTable. This
row exists only if the associated ceRedunGroupEntry
is active and has at least one primary and secondary
member active.
Indexes
ceRedunGroupTypeIndex ceRedunGroupIndex
Column Syntax OID
ceRedunCommandMbrNumber
Specifies the redundancy group member to which the
switch command applies.

The value -1 for this object is only valid for a clear
command and indicates the clear command applies to
all members of the r…
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.9.9.498.1.3.1.1
ceRedunCommandSwitch
Allows the initiation of a redundancy switchover command
for the redundant member. When a valid member is specified,
the command applies to the specified member.

If the redundancy switchover command cann…
CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunSwitchCommandr/w
Textual Convention: CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunSwitchCommand Enumeration
Type Values:
1noCmdInEffect
2clear
3manualSwitchAway
4forcedSwitchAway
5lockoutProtection
 .1.3.6.1.4.1.9.9.498.1.3.1.2