ceRedunMbrPriority
CISCO-ENTITY-REDUNDANCY-MIB ·
.1.3.6.1.4.1.9.9.498.1.2.2.1.6
Object
column
r/w
Enumeration
The priority of the member. For 1:n architectures if
the secondary member has already become active for
a primary member with a lower priority, it can instead
take over for a different primary member if that member
has higher priority.
This field is only applicable if the member is to be
included in a group using the 1:n architecture. It is
not applicable if the member is to be included in a
group using the 1:1 or 1+1 architecture, and is ignored
in that case.
Context
- MIB
- CISCO-ENTITY-REDUNDANCY-MIB
- OID
.1.3.6.1.4.1.9.9.498.1.2.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ceRedunMbrConfigEntry
- Table
- ceRedunMbrConfigTable
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | low |
2 | high |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ceRedunMbrNumber This field should be assigned as a unique member number
within a redundancy group. The value 0 always indicates a
secondary member. Primary members should have numbers
which ar… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.498.1.2.2.1.1 |
| ceRedunMbrPhysIndex This field specifies the entity PhysicalIndex which is being
configured as a redundancy member.
It is the responsibility of the managed device to enforce
any restr… | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.9.9.498.1.2.2.1.2 |
| ceRedunMbrMode This field is set to the 'primary' (working) or
'secondary' (protection) role within the redundancy group.
The designation as 'primary' or 'secondary' is configured
and is stati… | column | CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunMode | .1.3.6.1.4.1.9.9.498.1.2.2.1.3 |
| ceRedunMbrAddressType This field specifies the type of address used for the
ceRedunMbrAddress object. It does not need to be
instantiated when the ceRedunGroupScope value is
'remoteSystem' or 'remote… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.498.1.2.2.1.4 |
| ceRedunMbrRemoteAddress This field specifies the remote management address of the
shelf or system where the peer member is expected to be
configured. It does not need to be instantiated when the
ceRed… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.498.1.2.2.1.5 |
| ceRedunMbrStorageType The storage type for this conceptual row. By default,
the row will not be saved into non-volatile memory
unless this object is set to the value nonVolatile.
Note: C… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.498.1.2.2.1.8 |
| ceRedunMbrRowStatus The configuration status of this member entry.
A row in the ceRedunMbrConfigTable may not be created,
deleted, or set to notInService if the associated
ceRedunGroup… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.498.1.2.2.1.9 |