ceRedunGroupWaitToRestore
CISCO-ENTITY-REDUNDANCY-MIB ·
.1.3.6.1.4.1.9.9.498.1.1.6.1.7
Object
The Wait To Restore period in seconds. This object is
only applicable to groups which are configured as revertive
and does not need to be instantiated for groups which
are non-revertive.
After clearing of a condition that necessitated an
automatic switch, the wait to restore period must elapse
before reverting. This is intended to avoid rapid switch
oscillations.
This object may not be modified if the associated
ceRedunGroupRowStatus object is equal to active(1).
Context
- MIB
- CISCO-ENTITY-REDUNDANCY-MIB
- OID
.1.3.6.1.4.1.9.9.498.1.1.6.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- ceRedunGroupEntry
- Table
- ceRedunGroupTable
- Siblings
- 9
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ceRedunGroupIndex A group number assigned to a particular redundancy group.
A group consists of one or more primary members which are
protected by one or more secondary members. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.498.1.1.6.1.1 |
| ceRedunGroupRowStatus The configuration status of this redundancy group entry.
An entry may not exist in the active RowStatus state
unless all configurable read-create objects in the en… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.498.1.1.6.1.10 |
| ceRedunGroupString If ceRedunUsesGroupName is 'true' for this redundancy group
type, this object is a group name identifier and the value
of this object has to be specified and should contain no
in… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.498.1.1.6.1.2 |
| ceRedunGroupRedunType The intended type of redundancy protection such as 'yCable'
or 'aps' for this redundancy group. | column | CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunType | .1.3.6.1.4.1.9.9.498.1.1.6.1.3 |
| ceRedunGroupScope This object determines the local/remote scope of the
redundancy group.
This object may not be modified if the associated
ceRedunGroupRowStatus object is equal to … | column | CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunScope | .1.3.6.1.4.1.9.9.498.1.1.6.1.4 |
| ceRedunGroupArch The architecture of the redundancy group, such as
1:1 or 1:n, etc.
This object may not be modified if the associated
ceRedunGroupRowStatus object is equal to active… | column | CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunArch | .1.3.6.1.4.1.9.9.498.1.1.6.1.5 |
| ceRedunGroupRevert The revertive mode of the redundancy group.
nonrevertive(1)
The secondary member remains active until another
switchable event takes place.
… | column | Enumeration | .1.3.6.1.4.1.9.9.498.1.1.6.1.6 |
| ceRedunGroupDirection This object is applicable only for those types of redundancy
such as APS where switchovers can take place independently at
near and far ends of a pair of interconnecting links an… | column | Enumeration | .1.3.6.1.4.1.9.9.498.1.1.6.1.8 |
| ceRedunGroupStorageType The storage type for this conceptual row. By default,
the row will not be saved into non-volatile memory
unless this object is set to the value nonVolatile.
Note: C… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.498.1.1.6.1.9 |