ceRedunMbrNumber

Object

column SNMPv2-SMIUnsigned32

This field should be assigned as a unique member number 
within a redundancy group. The value 0 always indicates a 
secondary member. Primary members should have numbers 
which are higher than secondary members.
              
Note: This definition of member values, including the use 
of the value 0 for the secondary member allows compatibility
with existing 1:n SONET APS channel numbering. Yet the 
numbering definition has also been expanded to allow support 
for the most general m:n redundancy architectures.

Context

MIB: CISCO-ENTITY-REDUNDANCY-MIB
OID: .1.3.6.1.4.1.9.9.498.1.2.2.1.1
Type: column
Access: noaccess
Status: current
Parent: ceRedunMbrConfigEntry
Table: ceRedunMbrConfigTable
Siblings: 7

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ceRedunMbrPhysIndex This field specifies the entity PhysicalIndex which is being configured as a redundancy member. It is the responsibility of the managed device to enforce any restr…	column	ENTITY-MIBPhysicalIndex	`.1.3.6.1.4.1.9.9.498.1.2.2.1.2`
ceRedunMbrMode This field is set to the 'primary' (working) or 'secondary' (protection) role within the redundancy group. The designation as 'primary' or 'secondary' is configured and is stati…	column	CISCO-ENTITY-REDUNDANCY-TC-MIBCeRedunMode	`.1.3.6.1.4.1.9.9.498.1.2.2.1.3`
ceRedunMbrAddressType This field specifies the type of address used for the ceRedunMbrAddress object. It does not need to be instantiated when the ceRedunGroupScope value is 'remoteSystem' or 'remote…	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.498.1.2.2.1.4`
ceRedunMbrRemoteAddress This field specifies the remote management address of the shelf or system where the peer member is expected to be configured. It does not need to be instantiated when the ceRed…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.498.1.2.2.1.5`
ceRedunMbrPriority The priority of the member. For 1:n architectures if the secondary member has already become active for a primary member with a lower priority, it can instead take over for a dif…	column	Enumeration	`.1.3.6.1.4.1.9.9.498.1.2.2.1.6`
ceRedunMbrStorageType The storage type for this conceptual row. By default, the row will not be saved into non-volatile memory unless this object is set to the value nonVolatile. Note: C…	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.9.9.498.1.2.2.1.8`
ceRedunMbrRowStatus The configuration status of this member entry. A row in the ceRedunMbrConfigTable may not be created, deleted, or set to notInService if the associated ceRedunGroup…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.498.1.2.2.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects