CISCO-DSPU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
81

dspuPoolClassTable

table
.1.3.6.1.4.1.9.9.24.1.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk dspuPoolClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DSPU-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DSPU-MIB::dspuPoolClassTable' 
Table listing defined pool classes for the DSPU node.
          
A pool class is defined at the DSPU node as a pool 
  of upstream LUs that may be shared among downstream PUs.
          
Each entry in the table represents a separate 
  pool class definition.
          
Entries in the table may not be created/deleted;
  however, values in existing entries may be modified.
          
Pool classes are created when an existing LU is 
  defined as a member of the pool class.
dspuPoolClassEntry row .1.3.6.1.4.1.9.9.24.1.2.1.1
Each entry represents a defined pool class.
Indexes
Column Syntax OID
dspuPoolClassIndex
Index of a pool class entry in the dspuPoolClassTable.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.24.1.2.1.1.1
dspuPoolClassName
Name identifier of the pool class.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.9.9.24.1.2.1.1.2
dspuPoolClassInactivityTimeout
Value (in minutes) of the inactivity timeout that
will be applied to active LU sessions assigned
from the pool class.

The inactivity timeout feature for pooled LUs is
disabled if the InactivityTimeout…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.2.1.1.3
dspuPoolClassOperUpStreamLuDefs
Number of upstream LUs defined in the pool class.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.24.1.2.1.1.4
dspuPoolClassOperDnStreamLuDefs
Number of downstream LUs defined in the pool class.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.24.1.2.1.1.5

dspuPooledLuTable

table
.1.3.6.1.4.1.9.9.24.1.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk dspuPooledLuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DSPU-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DSPU-MIB::dspuPooledLuTable' 
Table listing all LUs defined in a specified pool class.
          
The entries in the table provide information such that
  the downstream LUs in the pool can be correlated with 
  the upstream LUs to which they may be assigned 
  and vice versa.
          
If all upstream LUs have been assigned, 
  downstream LUs may be waiting for assignment.
          
If there are no downstream LUs waiting for assignment,
  upstream LUs may be unassigned.
dspuPooledLuEntry row .1.3.6.1.4.1.9.9.24.1.3.1.1
Each entry represents an LU that is defined
as a member of the specified pool class.
Indexes
Column Syntax OID
dspuPooledLuPeerPuIndex
Index (dspuPuOperIndex) of the peer PU that owns
the peer LU.
PeerPuIndex is zero if peer LU has not been assigned.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.24.1.3.1.1.1
dspuPooledLuPeerLuLocalAddress
NAU address (dspuLuOperLuLocalAddress) of the peer LU.
PeerLuLocalAddress is zero if peer LU has not been assigned.
Integer32
Constraints:
range: 0-254
 .1.3.6.1.4.1.9.9.24.1.3.1.1.2

dspuPuAdminTable

table
.1.3.6.1.4.1.9.9.24.1.4.1 · 1 row entry · 19 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk dspuPuAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DSPU-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DSPU-MIB::dspuPuAdminTable' 
Table listing all defined upstream/downstream PUs 
that are owned by the DSPU node.
          
NOTE: The dspuPuAdminTable does not include default 
   downstream PUs that may be dynamically created.
dspuPuAdminEntry row .1.3.6.1.4.1.9.9.24.1.4.1.1
Each entry represents a defined upstream/downstream PU.
Indexes
Column Syntax OID
dspuPuAdminIndex
Index of the PU entry in the dspuPuAdminTable.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.24.1.4.1.1.1
dspuPuAdminName
Name of the PU.
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.9.9.24.1.4.1.1.2
dspuPuAdminType
PU Type is either upstream or downstream.
Enumerationr/w
Enumerated Values:
1upstreamPu
2dnstreamPu
 .1.3.6.1.4.1.9.9.24.1.4.1.1.3
dspuPuAdminRemoteMacAddress
MAC address of the remote PU.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.24.1.4.1.1.4
dspuPuAdminRemoteSapAddress
SAP address of the remote PU.
Integer32r/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.9.9.24.1.4.1.1.5
dspuPuAdminLocalSapAddress
SAP address of the local PU.
Integer32r/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.9.9.24.1.4.1.1.6
dspuPuAdminXid
Upstream PU : XID that will be sent to the remote PU.
Dnstream PU : XID that must be received from the remote PU.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.24.1.4.1.1.7
dspuPuAdminXidFmt
Type of XID format used during activation of the link
between this dspuNode and the remote PU.
Enumerationr/w
Enumerated Values:
1formatUnknown
2format0
3format3
 .1.3.6.1.4.1.9.9.24.1.4.1.1.8
dspuPuAdminWindowSize
Send/Receive window size to be used across the link
between this dspuNode and the remote PU.
Integer32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.9.9.24.1.4.1.1.9
dspuPuAdminMaxIframe
Maximum size of an I-frame that can be transmitted/received
across the link between this dspuNode and the remote PU.
Integer32r/w
Constraints:
range: 64-18432
 .1.3.6.1.4.1.9.9.24.1.4.1.1.10
dspuPuAdminLinkRetryCount
Number of times that the DSPU node will attempt to activate
the link between the dspuNode and the remote PU.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.4.1.1.11
dspuPuAdminLinkRetryTimeout
Value (in seconds) for the delay between link activation
attempts between the dspuNode and the remote PU.
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.9.9.24.1.4.1.1.12
dspuPuAdminStartPu
Attempt link activation with the remote PU.
TRUE -> Attempt link activation with remote PU.
FALSE -> Do not attempt link activation with remote PU.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.24.1.4.1.1.13
dspuPuAdminDlcType
DLC type used by the dspuNode for link activation
with the remote PU.
Enumerationr/w
Enumerated Values:
1undefined
2sdlc
5ethernet
6tokenRing
8rsrb
9framerelay
10fddi
11qllc
 .1.3.6.1.4.1.9.9.24.1.4.1.1.14
dspuPuAdminDlcUnit
DLC unit used by the dspuNode for link activation
with the remote PU.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.4.1.1.15
dspuPuAdminDlcPort
DLC port used by the dspuNode for link activation
with the remote PU.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.4.1.1.16
dspuPuAdminFocalPoint
PU serves as a focal point for alert forwarding.
TRUE -> PU serves as focal point
FALSE -> PU does not serve as focal point

Only an upstream PU may be defined as a focal point.

Downstream …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.24.1.4.1.1.17
dspuPuAdminRowStatus
Used by a Management Station to create or delete the row
entry in the dspuPuAdminTable following the RowStatus
textual convention.

Upon successful creation of the row, an Agent automatically
creates a …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.24.1.4.1.1.18
dspuPuAdminRemoteAddress
Poll address, DLCI, or subscriber address
associated with the remote PU.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.9.9.24.1.4.1.1.19

dspuPuOperTable

table
.1.3.6.1.4.1.9.9.24.1.4.2 · 1 row entry · 22 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk dspuPuOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DSPU-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DSPU-MIB::dspuPuOperTable' 
Table listing all active upstream/downstream PUs
that are owned by the DSPU node (including default PUs).
          
NOTE: In addition to the explicitly defined PUs from 
   the dspuPuAdminTable, the dspuPuOperTable also includes 
   default downstream PUs that may be dynamically created.
dspuPuOperEntry row .1.3.6.1.4.1.9.9.24.1.4.2.1
Each entry represents an active upstream/downstream PU.
Indexes
Column Syntax OID
dspuPuOperIndex
Index of the PU entry in dspuPuOperTable.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.24.1.4.2.1.1
dspuPuOperName
Name of the PU.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.9.9.24.1.4.2.1.2
dspuPuOperType
PU type is either upstream or downstream.
Enumeration
Enumerated Values:
1upstreamPu
2dnstreamPu
 .1.3.6.1.4.1.9.9.24.1.4.2.1.3
dspuPuOperRemoteMacAddress
MAC address of the remote PU.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.24.1.4.2.1.4
dspuPuOperRemoteSapAddress
SAP address of the remote PU.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.9.9.24.1.4.2.1.5
dspuPuOperLocalSapAddress
SAP address of the local PU.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.9.9.24.1.4.2.1.6
dspuPuOperXid
Upstream PU : XID that was sent to the remote PU.
Dnstream PU : XID that was received from the remote PU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.24.1.4.2.1.7
dspuPuOperXidFmt
Type of XID format used during activation of the link
between this dspuNode and the remote PU.
Enumeration
Enumerated Values:
1formatUnknown
2format0
3format3
 .1.3.6.1.4.1.9.9.24.1.4.2.1.8
dspuPuOperWindowSize
Send/Receive window size to be used across the link
between this dspuNode and the remote PU.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.9.9.24.1.4.2.1.9
dspuPuOperMaxIframe
Maximum size of an I-frame that can be transmitted/received
across the link between this dspuNode and the remote PU.
Integer32
Constraints:
range: 64-18432
 .1.3.6.1.4.1.9.9.24.1.4.2.1.10
dspuPuOperLinkRetryCount
Number of times that the DSPU node will attempt to activate
the link between the dspuNode and the remote PU.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.4.2.1.11
dspuPuOperLinkRetryTimeout
Value (in seconds) for the delay between link activation
attempts between the dspuNode and the remote PU.
Integer32
Constraints:
range: 1-600
 .1.3.6.1.4.1.9.9.24.1.4.2.1.12
dspuPuOperStartPu
Attempt link activation with the remote PU.
TRUE -> Attempt link activation with remote PU.
FALSE -> Do not attempt link activation with remote PU.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.24.1.4.2.1.13
dspuPuOperDlcType
DLC type used by the dspuNode for link activation
with the remote PU.
Enumeration
Enumerated Values:
1undefined
2sdlc
5ethernet
6tokenRing
8rsrb
9framerelay
10fddi
11qllc
 .1.3.6.1.4.1.9.9.24.1.4.2.1.14
dspuPuOperDlcUnit
DLC unit used by the dspuNode for link activation
with the remote PU.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.4.2.1.15
dspuPuOperDlcPort
DLC port used by the dspuNode for link activation
with the remote PU.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.4.2.1.16
dspuPuOperFocalPoint
PU serves as a focal point for alert forwarding.
TRUE -> PU serves as focal point
FALSE -> PU does not serve as focal point

Only an upstream PU may be defined as a focal point.

Downstream …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.24.1.4.2.1.17
dspuPuOperState
Operational state of PU is either active or inactive.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.24.1.4.2.1.18
dspuPuOperFsmState
Current FSM state of the PU as follows:
linkReset
- Link is in reset state - not connected
linkPendConnOut
- Pending ConnectOut to establish link
linkPendConnIn
- Pending ConnectIn to establish link
linkPendXid
…
Enumeration
Enumerated Values:
1linkReset
2linkPendConnOut
3linkPendConnIn
4linkPendXid
5linkXidNeg
6linkConnOut
7linkConnIn
8linkConnected
9puPendAct
10puActive
11puBusy
12puPendInact
13linkPendDisc
14linkPendClose
 .1.3.6.1.4.1.9.9.24.1.4.2.1.19
dspuPuOperStartTime
Timestamp of PU activation (when ACTPU +rsp received).
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.24.1.4.2.1.20
dspuPuOperLastStateChgTime
TimeStamp of last PU state change between active<->inactive.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.24.1.4.2.1.21
dspuPuOperRemoteAddress
Poll address, DLCI, or subscriber address
associated with the remote PU.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.9.9.24.1.4.2.1.22

dspuPuStatsTable

table
.1.3.6.1.4.1.9.9.24.1.4.3 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk dspuPuStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DSPU-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DSPU-MIB::dspuPuStatsTable' 
Table listing the statistics recorded for each PU.
dspuPuStatsEntry row .1.3.6.1.4.1.9.9.24.1.4.3.1
Each entry represents an active upstream/downstream PU
and has a corresponding entry in the dspuPuOperTable.
Indexes
Column Syntax OID
dspuPuStatsSentBytes
Number of bytes sent by this PU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.1
dspuPuStatsRcvdBytes
Number of bytes received by this PU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.2
dspuPuStatsSentFrames
Number of frames sent by this PU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.3
dspuPuStatsRcvdFrames
Number of frames received by this PU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.4
dspuPuStatsSentNegativeRsps
Number of negative responses sent by this PU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.5
dspuPuStatsRcvdNegativeRsps
Number of negative responses received by this PU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.6
dspuPuStatsActiveLus
Number of active LUs on this PU
(LU becomes active when ACTLU +rsp received).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.7
dspuPuStatsInactiveLus
Number of inactive LUs on this PU
(LU is inactive until ACTLU rq or ACTLU +rsp received).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.8
dspuPuStatsBindLus
Number of LUs on this PU which are active-in-session.
(LU is active-in-session when BIND rq received)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.9
dspuPuStatsActivationFailures
Number of activation failures for this PU.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.24.1.4.3.1.10
dspuPuStatsLastActivationFailureReason
Reason for last activation failure of this PU as follows:
noError
- No PU activation failure has been detected
otherError
- Undefined error detected during PU activation
internalError
- Internal resources error de…
Enumeration
Enumerated Values:
1noError
2otherError
3internalError
4configurationError
5puNegativeResponse
6puAlreadyActive
 .1.3.6.1.4.1.9.9.24.1.4.3.1.11

dspuLuAdminTable

table
.1.3.6.1.4.1.9.9.24.1.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk dspuLuAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DSPU-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DSPU-MIB::dspuLuAdminTable' 
Table listing all LUs owned by the PU.
          
NOTE: The dspuLuAdminTable does not include LUs owned by 
      default downstream PUs that may be dynamically created.
dspuLuAdminEntry row .1.3.6.1.4.1.9.9.24.1.5.1.1
Each entry represents a defined LU owned by the PU.
Indexes
Column Syntax OID
dspuLuAdminLuLocalAddress
NAU address of the local LU.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.9.9.24.1.5.1.1.1
dspuLuAdminType
LU type is either pooled or dedicated.
Enumerationr/w
Enumerated Values:
1pooled
2dedicated
 .1.3.6.1.4.1.9.9.24.1.5.1.1.2
dspuLuAdminPoolClassName
Pool class to which the LU is defined as a member.
The dspuLuAdminPoolClassName is valid for pooled LUs only.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.9.9.24.1.5.1.1.3
dspuLuAdminPeerPuIndex
For downstream LUs, the PeerPuIndex identifies
the upstream PU that owns the upstream LU to
which this downstream LU is assigned.

For upstream LUs, the PeerPuIndex identifies
the downstream PU that owns …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.24.1.5.1.1.4
dspuLuAdminPeerLuLocalAddress
For downstream LUs, the PeerLuLocalAddress identifies
the NAU address of the upstream LU to which this
downstream LU is assigned.

For upstream LUs, the PeerLuLocalAddress identifies
the NAU address of the…
Integer32r/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.9.9.24.1.5.1.1.5
dspuLuAdminRowStatus
Used by a Management Station to create or delete the row
entry in the dspuLuAdminTable following the RowStatus
textual convention.

Upon successful creation of the row, an Agent automatically
creates a …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.24.1.5.1.1.6

dspuLuOperTable

table
.1.3.6.1.4.1.9.9.24.1.5.2 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk dspuLuOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DSPU-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DSPU-MIB::dspuLuOperTable' 
Table listing all LUs owned by the PU.
          
NOTE: In addition to the LUs owned by explicitly defined PUs 
      from the dspuLuAdminTable, the dspuLuOperTable also 
      includes the LUs owned by default downstream PUs 
      that may be dynamically created.
dspuLuOperEntry row .1.3.6.1.4.1.9.9.24.1.5.2.1
Each entry represents a defined LU owned by the PU.
Indexes
Column Syntax OID
dspuLuOperLuLocalAddress
NAU address of the local LU.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.9.9.24.1.5.2.1.1
dspuLuOperType
LU type is either pooled or dedicated.
Enumeration
Enumerated Values:
1pooled
2dedicated
 .1.3.6.1.4.1.9.9.24.1.5.2.1.2
dspuLuOperPoolClassName
Pool class to which the LU is defined as a member.
The dspuLuOperPoolClassName is valid for pooled LUs only.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.9.9.24.1.5.2.1.3
dspuLuOperPeerPuIndex
For downstream LUs, the PeerPuIndex identifies
the upstream PU that owns the upstream LU to
which this downstream LU is assigned.

For upstream LUs, the PeerPuIndex identifies
the downstream PU that owns …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.24.1.5.2.1.4
dspuLuOperPeerLuLocalAddress
For downstream LUs, the PeerLuLocalAddress identifies
the NAU address of the upstream LU to which this
downstream LU is assigned.

For upstream LUs, the PeerLuLocalAddress identifies
the NAU address of the…
Integer32
Constraints:
range: 0-254
 .1.3.6.1.4.1.9.9.24.1.5.2.1.5
dspuLuOperState
Operational state of LU is either active or inactive.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.24.1.5.2.1.6
dspuLuOperFsmState
Current FSM state of the LU as follows:
reset
- neither dnLu or upLu active
dnLuStarted
- dnLu active, upLu inactive
upLuActive
- upLu active, dnLu inactive
dnLuPendAct
- dnLu pending activation, upLu active-una…
Enumeration
Enumerated Values:
1reset
2dnLuStarted
3upLuActive
4dnLuPendAct
5dnLuActUnav
6upLuPendAvail
7bothAvail
8dnLuPendInact
9upLuPendInact
10luInactivityTimeout
11dnInactivityPendInact
 .1.3.6.1.4.1.9.9.24.1.5.2.1.7
dspuLuOperSessionState
Operational state of LU session is either bound or unbound.
Enumeration
Enumerated Values:
1bound
2unbound
 .1.3.6.1.4.1.9.9.24.1.5.2.1.8
dspuLuOperLastActivationFailureReason
Reason for last activation failure of this PU as follows:
noError
- No LU activation failure has been detected
otherError
- Undefined error detected during LU activation
luNegativeResponse
- Negative ACTLU respons…
Enumeration
Enumerated Values:
1noError
2otherError
3luNegativeResponse
 .1.3.6.1.4.1.9.9.24.1.5.2.1.9

dspuSapTable

table
.1.3.6.1.4.1.9.9.24.1.6.1 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk dspuSapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DSPU-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DSPU-MIB::dspuSapTable' 
Table listing the SAPs that are enabled for the DSPU node.
dspuSapEntry row .1.3.6.1.4.1.9.9.24.1.6.1.1
Each entry represents an enabled SAP for the DSPU node.
Indexes
Column Syntax OID
dspuSapAddress
SAP address of the local SAP.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.9.9.24.1.6.1.1.1
dspuSapType
Local SAP type is either upstreamSap or downstreamSap.
Enumerationr/w
Enumerated Values:
1upstreamSap
2dnstreamSap
 .1.3.6.1.4.1.9.9.24.1.6.1.1.2
dspuSapDlcType
DLC type of the adapter that owns the local SAP.
Enumeration
Enumerated Values:
1undefined
2sdlc
5ethernet
6tokenRing
8rsrb
9framerelay
10fddi
11qllc
 .1.3.6.1.4.1.9.9.24.1.6.1.1.3
dspuSapDlcUnit
DLC unit of the adapter that owns the local SAP.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.6.1.1.4
dspuSapDlcPort
DLC port of the adapter that owns the local SAP.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.24.1.6.1.1.5
dspuSapOperState
Operational state of the local SAP as follows:
- sapClosed
- sapOpening
- sapOpened
- sapClosing
Enumeration
Enumerated Values:
1sapClosed
2sapOpening
3sapOpened
4sapClosing
 .1.3.6.1.4.1.9.9.24.1.6.1.1.6
dspuSapRowStatus
This object is used by a Management Station to create
or delete the row entry in the dspuSapTable following
the RowStatus textual convention.

The Management Station can set the value to 'destroy (6)'
and…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.24.1.6.1.1.7