CISCO-DOT11-RADIO-DIAGNOSTIC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
6

cDot11RadioDiagTable

table
.1.3.6.1.4.1.9.10.105.1.1.1 · 1 row entry · 6 columns
Open in standard view 
This table allows a network management system to
control the behavior of the radio interface on an
802.11 station and the 802.11 clients associated with
that station through that particular interface for
the purpose of radio environment diagnosis.  The
administrator can modify the MIB objects in this
table to temporarily alter the behavior of that
particular dot11 radio interface and the respective
associated clients.
          
This table has a sparse dependent relationship
with ifTable defined in IF-MIB.  There exists a
row in this table corresponding to the row for each
dot11 interface found in ifTable.  However, this
table is not applicable for virtual dot11
interfaces.
cDot11RadioDiagEntry entry .1.3.6.1.4.1.9.10.105.1.1.1.1
An entry holds the set of temporary values for
the parameters to be applied to one particular dot11
interface and the respective clients to temporarily
alter their behavior.
Indexes
IF-MIBifIndex
Column Syntax OID
cDot11RadioDiagTempChannel
Temporary channel number for the 802.11 interface
identified by ifIndex.

The value this object takes depends on the value of
the object dot11PHYType defined in
IEEE802dot11-MIB.

The semanti…
Unsigned32r/w
Constraints:
range: 108-108
range: 161-161
range: 157-157
range: 153-153
range: 149-149
range: 140-140
range: 136-136
range: 132-132
range: 128-128
range: 124-124
range: 120-120
range: 116-116
range: 112-112
range: 0-14
range: 104-104
range: 100-100
range: 64-64
range: 60-60
range: 56-56
range: 52-52
range: 48-48
range: 46-46
range: 44-44
range: 42-42
range: 40-40
range: 38-38
range: 36-36
range: 34-34
 .1.3.6.1.4.1.9.10.105.1.1.1.1.1
cDot11RadioDiagTempTxPowerLevel
Temporary transmit power level for the 802.11
interface identified by ifIndex.

A value in the range of 1 to 8 refers to one of the
power levels from the MIB table 'dot11PhyTxPowerTable'
in IEEE802dot11-MI…
Unsigned32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.9.10.105.1.1.1.1.2
cDot11RadioDiagMode
Test mode as carried by the Cisco Radio Management
Extensions in the 802.11 beacon frame.

The semantics are described as follows.

normal - Indicates that the station is operating in
non-te…
Enumerationr/w
Enumerated Values:
1normal
2apRadioDiscovery
3siteSurveyTempSettings
4siteSurveyNonTempSettings
 .1.3.6.1.4.1.9.10.105.1.1.1.1.3
cDot11RadioDiagSettingsEnabled
A flag to indicate whether the station will apply
the temporary channel, transmit power settings and
the data rate sets configured in this entry to the
particular dot11 interface and the client transmit
power setting to…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.105.1.1.1.1.4
cDot11RadioDiagTempClientTxPower
Temporary transmit power level for the 802.11
clients associated with this station through the
802.11 interface identified by ifIndex.

The value configured through this object is carried
by the beacon fra…
Unsigned32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.9.10.105.1.1.1.1.5
cDot11RadioDiagTempDataRateSet
This object specifies the set of data rates at which
the station may transmit data through the dot11
interface identified by ifIndex. The semantics of
this object are similar to that of the object
dot11OperationalRateS…
OctetStringr/w
Constraints:
range: 1-126
 .1.3.6.1.4.1.9.10.105.1.1.1.1.6