cDot11RadioDiagTempTxPowerLevel
CISCO-DOT11-RADIO-DIAGNOSTIC-MIB ·
.1.3.6.1.4.1.9.10.105.1.1.1.1.2
Object
column
r/w
Unsigned32
Temporary transmit power level for the 802.11
interface identified by ifIndex.
A value in the range of 1 to 8 refers to one of the
power levels from the MIB table 'dot11PhyTxPowerTable'
in IEEE802dot11-MIB. The power levels that can be
assigned to this object from the set of acceptable
values mentioned above vary depending on the value of
the MIB object cd11IfCurrentCarrierSet defined in
CISCO-DOT11-IF-MIB.
The object cDot11RadioDiagSettingsEnabled must be set
to 'true' to apply the temporary value specified
through this object to the 802.11 interface. Setting
cDot11RadioDiagSettingsEnabled to 'false' restores
the power setting of this interface to the original
value that was there before applying the temporary
value to that interface. A value of 0 indicates that
this object hasn't been configured with a valid
power level.
Context
- MIB
- CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
- OID
.1.3.6.1.4.1.9.10.105.1.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cDot11RadioDiagEntry
- Table
- cDot11RadioDiagTable
- Siblings
- 5
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cDot11RadioDiagTempChannel Temporary channel number for the 802.11 interface
identified by ifIndex.
The value this object takes depends on the value of
the object dot11PHYType defined in
IEEE… | column | Unsigned32 | .1.3.6.1.4.1.9.10.105.1.1.1.1.1 |
| cDot11RadioDiagMode Test mode as carried by the Cisco Radio Management
Extensions in the 802.11 beacon frame.
The semantics are described as follows.
normal - Indicates… | column | Enumeration | .1.3.6.1.4.1.9.10.105.1.1.1.1.3 |
| cDot11RadioDiagSettingsEnabled A flag to indicate whether the station will apply
the temporary channel, transmit power settings and
the data rate sets configured in this entry to the
particular dot11 interface … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.105.1.1.1.1.4 |
| cDot11RadioDiagTempClientTxPower Temporary transmit power level for the 802.11
clients associated with this station through the
802.11 interface identified by ifIndex.
The value configured through … | column | Unsigned32 | .1.3.6.1.4.1.9.10.105.1.1.1.1.5 |
| cDot11RadioDiagTempDataRateSet This object specifies the set of data rates at which
the station may transmit data through the dot11
interface identified by ifIndex. The semantics of
this object are similar to … | column | OctetString | .1.3.6.1.4.1.9.10.105.1.1.1.1.6 |