cDot11RadioDiagTempClientTxPower
CISCO-DOT11-RADIO-DIAGNOSTIC-MIB ·
.1.3.6.1.4.1.9.10.105.1.1.1.1.5
Object
column
r/w
Unsigned32
Temporary transmit power level for the 802.11
clients associated with this station through the
802.11 interface identified by ifIndex.
The value configured through this object is carried
by the beacon frames transmitted by this 802.11
station and picked up by the associated clients, if
any, from these beacon frames to set their respective
transmit power levels.
A value in the range of 1 to 8 refers to one of the
recommended power levels from the table
cd11IfClientTxPowerTable defined in
CISCO-DOT11-IF-MIB. The power levels that can be
assigned to this object from the set of acceptable
values mentioned above vary depending on the value of
the MIB object cd11IfCurrentCarrierSet defined in
CISCO-DOT11-IF-MIB.
The object cDot11RadioDiagSettingsEnabled must be set
to 'true' to apply the temporary value specified
through this object to the respective clients.
Setting cDot11RadioDiagSettingsEnabled to 'false'
restores the transmit power setting of the associated
clients to the original value that was there before
applying this temporary value to those clients. A
value of 0 indicates that this object hasn't been
configured with a valid power level.
Context
- MIB
- CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
- OID
.1.3.6.1.4.1.9.10.105.1.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cDot11RadioDiagEntry
- Table
- cDot11RadioDiagTable
- Siblings
- 5
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cDot11RadioDiagTempChannel Temporary channel number for the 802.11 interface
identified by ifIndex.
The value this object takes depends on the value of
the object dot11PHYType defined in
IEEE… | column | Unsigned32 | .1.3.6.1.4.1.9.10.105.1.1.1.1.1 |
| cDot11RadioDiagTempTxPowerLevel Temporary transmit power level for the 802.11
interface identified by ifIndex.
A value in the range of 1 to 8 refers to one of the
power levels from the MIB table '… | column | Unsigned32 | .1.3.6.1.4.1.9.10.105.1.1.1.1.2 |
| cDot11RadioDiagMode Test mode as carried by the Cisco Radio Management
Extensions in the 802.11 beacon frame.
The semantics are described as follows.
normal - Indicates… | column | Enumeration | .1.3.6.1.4.1.9.10.105.1.1.1.1.3 |
| cDot11RadioDiagSettingsEnabled A flag to indicate whether the station will apply
the temporary channel, transmit power settings and
the data rate sets configured in this entry to the
particular dot11 interface … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.105.1.1.1.1.4 |
| cDot11RadioDiagTempDataRateSet This object specifies the set of data rates at which
the station may transmit data through the dot11
interface identified by ifIndex. The semantics of
this object are similar to … | column | OctetString | .1.3.6.1.4.1.9.10.105.1.1.1.1.6 |