CISCO-ATM-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
45

caqVccParamsTable

table
.1.3.6.1.4.1.9.9.279.1.1.1 · 1 row entry · 28 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk caqVccParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-QOS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-QOS-MIB::caqVccParamsTable' 
This table is defined to provide QoS information for
each active ATM VC existing on the interface.
caqVccParamsEntry row .1.3.6.1.4.1.9.9.279.1.1.1.1
This list contains the ATM QoS parameters provided by
ciscoAtmQosVccEntry.
Indexes
Column Syntax OID
caqVccParamsType
The service category of this virtual circuit connection.
ATM-FORUM-TC-MIBAtmServiceCategoryr/w
Type Values:
1other
2cbr
3rtVbr
4nrtVbr
5abr
6ubr
 .1.3.6.1.4.1.9.9.279.1.1.1.1.1
caqVccParamsPcrIn0
Input Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 0 (clp0).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.2
caqVccParamsPcrIn01
Number of OAM F5 end to end loopback cells sent through
the VCC.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.3
caqVccParamsPcrOut0
Output Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 0 (clp0).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.4
caqVccParamsPcrOut01
Output Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 1 (clp01).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.5
caqVccParamsScrIn0
Input Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.6
caqVccParamsScrIn01
Input Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.7
caqVccParamsScrOut0
Output Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.8
caqVccParamsScrOut01
Output Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.9
caqVccParamsBcsIn0
Input Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.10
caqVccParamsBcsIn01
Input Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.11
caqVccParamsBcsOut0
Output Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.12
caqVccParamsBcsOut01
Output Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.13
caqVccParamsInheritLevel
The source of configuration for peak cell rate.
VcParamConfigLocation
Type Values:
1configDefault
2configVcDirect
3configVcClass
4configVcClassSubInterface
5configVcClassInterface
 .1.3.6.1.4.1.9.9.279.1.1.1.1.14
caqVccParamsMcrIn
Input Minimum Cell Rate (MCR) in kbps for
connection with VBR-nrt or ABR type of QoS.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.15
caqVccParamsMcrOut
Output Minimum Cell Rate (MCR) in kbps for
connection with VBR-nrt or ABR type of QoS.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.16
caqVccParamsInvRdf
Inverse of rate decrease factor.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.17
caqVccParamsInvRif
Inverse of rate increase factor.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.18
caqVccParamsRfl
The source of configuration for rate factor.
VcParamConfigLocation
Type Values:
1configDefault
2configVcDirect
3configVcClass
4configVcClassSubInterface
5configVcClassInterface
 .1.3.6.1.4.1.9.9.279.1.1.1.1.19
caqVccParamsCdv
Cell delay variation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.20
caqVccParamsCdvt
Cell delay variation tolerance.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.21
caqVccParamsIcr
Initial cell rate.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.22
caqVccParamsTbe
Transient buffer exposure.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.23
caqVccParamsFrtt
Fixed round-trip time.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.24
caqVccParamsNrm
Maximum number of tx cells for each forward rm cell.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.25
caqVccParamsInvTrm
Maximum time between forward rm cells.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.26
caqVccParamsInvCdf
Inverse of cutoff decrease factor.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.27
caqVccParamsAdtf
Allowed cell rate decrease time factor.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.1.1.1.28

caqVpcParamsTable

table
.1.3.6.1.4.1.9.9.279.1.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk caqVpcParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-QOS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-QOS-MIB::caqVpcParamsTable' 
This table is defined to provide QoS information for
each active ATM VP existing on the interface.
caqVpcParamsEntry row .1.3.6.1.4.1.9.9.279.1.2.1.1
This list contains the ATM QoS parameters provided by
ciscoAtmQosVpcEntry.
Indexes
Column Syntax OID
caqVpcParamsVpState
VP state of the current permanent virtual path.
VpState
Type Values:
1vpStateInactive
2vpStateActive
 .1.3.6.1.4.1.9.9.279.1.2.1.1.1
caqVpcParamsPeakRate
Maximum rate in kbps at which the associated
permanent virtual path can transmit data.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.2.1.1.2
caqVpcParamsCesRate
Maximum rate in kbps at which CES VCs can transmit
data with the associated permanent virtual path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.2.1.1.3
caqVpcParamsDataVcCount
Number of data VCs currently associated with
the permanent virtual path.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.279.1.2.1.1.4
caqVpcParamsCesVcCount
Number of CES VCs currently associated with
the permanent virtual path.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.279.1.2.1.1.5
caqVpcParamsVcdF4Seg
Vcd for F4 OAM segment processing.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.279.1.2.1.1.6
caqVpcParamsVcdF4Ete
Vcd for F4 OAM end to end processing.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.279.1.2.1.1.7
caqVpcParamsScr
Sustained cell rate associated with the PVP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.2.1.1.8
caqVpcParamsMbs
Maximum burst size associated with the PVP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.2.1.1.9
caqVpcParamsAvailBw
Bandwidth in Kbps currently currently available
on this PVP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.2.1.1.10

caqQueuingParamsTable

table
.1.3.6.1.4.1.9.9.279.1.3.1 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk caqQueuingParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-QOS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-QOS-MIB::caqQueuingParamsTable' 
This table provides queuing related information
for a VC existing on an ATM interface.
caqQueuingParamsEntry row .1.3.6.1.4.1.9.9.279.1.3.1.1
This is defined as an entry in caqQueuingParamsTable.
Indexes
Column Syntax OID
caqQueuingParamsMeanQDepth
Mean Queue Depth associated with the vc. This value
is calculated based on the actual queue depth on the
interface and the exponential weighting constant.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.3.1.1.1

caqQueuingParamsClassTable

table
.1.3.6.1.4.1.9.9.279.1.3.2 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk caqQueuingParamsClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-QOS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-QOS-MIB::caqQueuingParamsClassTable' 
This table provides queuing information for all 
queuing classes associating with a VC.
caqQueuingParamsClassEntry row .1.3.6.1.4.1.9.9.279.1.3.2.1
This is defined as an entry in ciscoAtmQosVcQueuingClassTable
to provide queuing information of a specific class.
Indexes
Column Syntax OID
caqQueuingParamsClassIndex
A class index, which associates with an IP precedence
(0 to 8), is defined to reference individual
caqQueuingParamsClassEntry.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.9.9.279.1.3.2.1.1
caqQueuingParamsClassRandDrp
Number of packets dropped when Mean Queue
Length is between Minimum Threshold and
Maximum Threshold range.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.3.2.1.2
caqQueuingParamsClassTailDrp
Number of packets dropped because the Mean
Queue Depth exceeds the Maximum Threshold value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.3.2.1.3
caqQueuingParamsClassMinThre
Minimum Threshold value in kbps.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.3.2.1.4
caqQueuingParamsClassMaxThre
Maximum Threshold value in kbps.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.3.2.1.5
caqQueuingParamsClassMrkProb
Mark probability denominator. This is the value used
in the calculation of a packet being dropped when
the average queue size is between the minimum
threshold and the maximum threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.279.1.3.2.1.6