caqVccParamsType
CISCO-ATM-QOS-MIB ·
.1.3.6.1.4.1.9.9.279.1.1.1.1.1
Object
The service category of this virtual circuit connection.
Context
- MIB
- CISCO-ATM-QOS-MIB
- OID
.1.3.6.1.4.1.9.9.279.1.1.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- caqVccParamsEntry
- Table
- caqVccParamsTable
- Siblings
- 27
Syntax
ATM-FORUM-TC-MIBAtmServiceCategory
- Source
- ATM-FORUM-TC-MIBAtmServiceCategory
- Base type
Enumeration
Values & Constraints
Type Values
1 | other |
2 | cbr |
3 | rtVbr |
4 | nrtVbr |
5 | abr |
6 | ubr |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| caqVccParamsBcsIn0 Input Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.10 |
| caqVccParamsBcsIn01 Input Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.11 |
| caqVccParamsBcsOut0 Output Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.12 |
| caqVccParamsBcsOut01 Output Burst Cell Size (BCS) for connection
with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.13 |
| caqVccParamsInheritLevel The source of configuration for peak cell rate. | column | VcParamConfigLocation | .1.3.6.1.4.1.9.9.279.1.1.1.1.14 |
| caqVccParamsMcrIn Input Minimum Cell Rate (MCR) in kbps for
connection with VBR-nrt or ABR type of QoS. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.15 |
| caqVccParamsMcrOut Output Minimum Cell Rate (MCR) in kbps for
connection with VBR-nrt or ABR type of QoS. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.16 |
| caqVccParamsInvRdf Inverse of rate decrease factor. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.17 |
| caqVccParamsInvRif Inverse of rate increase factor. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.18 |
| caqVccParamsRfl The source of configuration for rate factor. | column | VcParamConfigLocation | .1.3.6.1.4.1.9.9.279.1.1.1.1.19 |
| caqVccParamsPcrIn0 Input Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 0 (clp0). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.2 |
| caqVccParamsCdv Cell delay variation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.20 |
| caqVccParamsCdvt Cell delay variation tolerance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.21 |
| caqVccParamsIcr Initial cell rate. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.22 |
| caqVccParamsTbe Transient buffer exposure. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.23 |
| caqVccParamsFrtt Fixed round-trip time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.24 |
| caqVccParamsNrm Maximum number of tx cells for each forward rm cell. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.25 |
| caqVccParamsInvTrm Maximum time between forward rm cells. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.26 |
| caqVccParamsInvCdf Inverse of cutoff decrease factor. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.27 |
| caqVccParamsAdtf Allowed cell rate decrease time factor. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.28 |
| caqVccParamsPcrIn01 Number of OAM F5 end to end loopback cells sent through
the VCC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.3 |
| caqVccParamsPcrOut0 Output Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 0 (clp0). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.4 |
| caqVccParamsPcrOut01 Output Peak Cell Rate (PCR) in kbps with
Cell Loss Priority bit set to 1 (clp01). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.5 |
| caqVccParamsScrIn0 Input Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.6 |
| caqVccParamsScrIn01 Input Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.7 |
| caqVccParamsScrOut0 Output Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 0 (clp0). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.8 |
| caqVccParamsScrOut01 Output Sustained Cell Rate (SCR) in kbps
for connection with VBR type of QoS and
Cell Loss Priority bit set to 1 (clp01). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.279.1.1.1.1.9 |