CISCO-ATM-QOS-MIB

        The MIB is created to provide ATM QoS information in
these areas:
        
1. Traffic shaping on a per-VC basis
2. Traffic shaping on a per-VP basis 
3. Per-VC queuing/buffering
        
Although the initial requirements of the MIB are
driven to support the GSR TAZ line card,
CISCO-ATM-QOS-MIB is designed as a generic MIB to
support ATM interfaces across all platforms.
        
Here are the tables defined in this MIB:
ciscoAtmQosVccTable 
     - to provide information on traffic shaping on 
       a per-VC basis.
                              
ciscoAtmQosVpcTable 
     - to provide information on traffic shaping on
       a per-VP basis.
            
ciscoAtmQosVcQueuingTable
ciscoAtmQosVcQueuingClassTable
     - to provide information on per-VC
       queuing/buffering.
    
Source file
CISCO-ATM-QOS-MIB
Last revised
Identity
ciscoAtmQosMIB
Base OID
1.3.6.1.4.1.9.9.279
Imported Objects
ATM-FORUM-TC-MIB AtmServiceCategory
ATM-MIB atmVclVci atmVclVpi atmVplVpi
CISCO-SMI ciscoMgmt
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ATM-QOS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ATM-QOS-MIB::ciscoAtmQosMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-QOS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-QOS-MIB::ciscoAtmQosMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (62)
.1.3.6.1.4.1.9.9.279
.1.3.6.1.4.1.9.9.279.0
.1.3.6.1.4.1.9.9.279.1
.1.3.6.1.4.1.9.9.279.1.1
.1.3.6.1.4.1.9.9.279.1.1.1
.1.3.6.1.4.1.9.9.279.1.1.1.1
.1.3.6.1.4.1.9.9.279.1.1.1.1.1
.1.3.6.1.4.1.9.9.279.1.1.1.1.10
.1.3.6.1.4.1.9.9.279.1.1.1.1.11
.1.3.6.1.4.1.9.9.279.1.1.1.1.12
.1.3.6.1.4.1.9.9.279.1.1.1.1.13
.1.3.6.1.4.1.9.9.279.1.1.1.1.14
.1.3.6.1.4.1.9.9.279.1.1.1.1.15
.1.3.6.1.4.1.9.9.279.1.1.1.1.16
.1.3.6.1.4.1.9.9.279.1.1.1.1.17
.1.3.6.1.4.1.9.9.279.1.1.1.1.18
.1.3.6.1.4.1.9.9.279.1.1.1.1.19
.1.3.6.1.4.1.9.9.279.1.1.1.1.2
.1.3.6.1.4.1.9.9.279.1.1.1.1.20
.1.3.6.1.4.1.9.9.279.1.1.1.1.21
.1.3.6.1.4.1.9.9.279.1.1.1.1.22
.1.3.6.1.4.1.9.9.279.1.1.1.1.23
.1.3.6.1.4.1.9.9.279.1.1.1.1.24
.1.3.6.1.4.1.9.9.279.1.1.1.1.25
.1.3.6.1.4.1.9.9.279.1.1.1.1.26
.1.3.6.1.4.1.9.9.279.1.1.1.1.27
.1.3.6.1.4.1.9.9.279.1.1.1.1.28
.1.3.6.1.4.1.9.9.279.1.1.1.1.3
.1.3.6.1.4.1.9.9.279.1.1.1.1.4
.1.3.6.1.4.1.9.9.279.1.1.1.1.5
.1.3.6.1.4.1.9.9.279.1.1.1.1.6
.1.3.6.1.4.1.9.9.279.1.1.1.1.7
.1.3.6.1.4.1.9.9.279.1.1.1.1.8
.1.3.6.1.4.1.9.9.279.1.1.1.1.9
.1.3.6.1.4.1.9.9.279.1.2
.1.3.6.1.4.1.9.9.279.1.2.1
.1.3.6.1.4.1.9.9.279.1.2.1.1
.1.3.6.1.4.1.9.9.279.1.2.1.1.1
.1.3.6.1.4.1.9.9.279.1.2.1.1.10
.1.3.6.1.4.1.9.9.279.1.2.1.1.2
.1.3.6.1.4.1.9.9.279.1.2.1.1.3
Integer32
.1.3.6.1.4.1.9.9.279.1.2.1.1.4
Integer32
.1.3.6.1.4.1.9.9.279.1.2.1.1.5
Integer32
.1.3.6.1.4.1.9.9.279.1.2.1.1.6
Integer32
.1.3.6.1.4.1.9.9.279.1.2.1.1.7
.1.3.6.1.4.1.9.9.279.1.2.1.1.8
.1.3.6.1.4.1.9.9.279.1.2.1.1.9
.1.3.6.1.4.1.9.9.279.1.3
.1.3.6.1.4.1.9.9.279.1.3.1
.1.3.6.1.4.1.9.9.279.1.3.1.1
.1.3.6.1.4.1.9.9.279.1.3.1.1.1
.1.3.6.1.4.1.9.9.279.1.3.2
.1.3.6.1.4.1.9.9.279.1.3.2.1
Integer32
.1.3.6.1.4.1.9.9.279.1.3.2.1.1
.1.3.6.1.4.1.9.9.279.1.3.2.1.2
.1.3.6.1.4.1.9.9.279.1.3.2.1.3
.1.3.6.1.4.1.9.9.279.1.3.2.1.4
.1.3.6.1.4.1.9.9.279.1.3.2.1.5
.1.3.6.1.4.1.9.9.279.1.3.2.1.6
.1.3.6.1.4.1.9.9.279.2
.1.3.6.1.4.1.9.9.279.2.1
.1.3.6.1.4.1.9.9.279.2.2
Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (2)
Enumeration
configDefault(1)
configVcDirect(2)
configVcClass(3)
configVcClassSubInterface(4)
configVcClassInterface(5)
Enumeration
vpStateInactive(1)
vpStateActive(2)
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.279.2.1.1
The compliance statement for entities which implement
this Cisco ATM QoS MIB.
Required groups
mandatory ciscoAtmQosVccGroup
mandatory ciscoAtmQosVpcGroup
mandatory ciscoAtmQosVcQueuingGroup
optional ciscoAtmQosVccAddon1Group This group is optional.
optional ciscoAtmQosVpcAddon1Group This group is optional.
Object refinements
ObjectAccessSyntaxDescription
caqVccParamsType readonly
Write access is not required.
caqVccParamsPcrIn0 readonly
Write access is not required.
caqVccParamsPcrIn01 readonly
Write access is not required.
caqVccParamsPcrOut0 readonly
Write access is not required.
caqVccParamsPcrOut01 readonly
Write access is not required.
caqVccParamsScrIn0 readonly
Write access is not required.
caqVccParamsScrIn01 readonly
Write access is not required.
caqVccParamsScrOut0 readonly
Write access is not required.
caqVccParamsScrOut01 readonly
Write access is not required.
caqVccParamsBcsIn0 readonly
Write access is not required.
caqVccParamsBcsIn01 readonly
Write access is not required.
caqVccParamsBcsOut0 readonly
Write access is not required.
caqVccParamsBcsOut01 readonly
Write access is not required.
caqVccParamsMcrIn readonly
Write access is not required.
caqVccParamsMcrOut readonly
Write access is not required.
caqVccParamsInvRdf readonly
Write access is not required.
caqVccParamsInvRif readonly
Write access is not required.
caqVccParamsCdvt readonly
Write access is not required.
caqVccParamsIcr readonly
Write access is not required.
caqVccParamsTbe readonly
Write access is not required.
caqVccParamsFrtt readonly
Write access is not required.
caqVccParamsNrm readonly
Write access is not required.
caqVccParamsInvTrm readonly
Write access is not required.