CISCO-APS-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
22

cApsConfigExtTable

table
.1.3.6.1.4.1.9.10.72.1.2 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cApsConfigExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-APS-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-APS-EXT-MIB::cApsConfigExtTable' 
This table augments the cApsConfigTable.
cApsConfigExtEntry row .1.3.6.1.4.1.9.10.72.1.2.1
A conceptual row in the cApsConfigExtTable.
Indexes
No indexes recorded
Column Syntax OID
cApsConfigSpan
The span (hopByHop or endToEnd) for the APS group.

hopByHop

This refers to linear APS, e.g. linear SONET APS, or hopByHop
CDL APS. In a DWDM system, an APS channel may be associated
with ei…
Enumerationr/w
Enumerated Values:
1hopByHop
2endToEnd
 .1.3.6.1.4.1.9.10.72.1.2.1.1
cApsConfigYcable
The Y-cable configuration for the APS group associated with
user channels.

noYcable

The APS channels in the APS group are not connected to an
external Y-cable.

ycable
…
Enumerationr/w
Enumerated Values:
1noYcable
2ycable
3ycableXconnectCommon
 .1.3.6.1.4.1.9.10.72.1.2.1.2
cApsConfigMinSearchUpInterval
This object is instantiated only when the standby interface
is not monitored. If both interfaces go down and the standby
interface is not monitored, successive switchovers may be used
in order to search for an interface…
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.9.10.72.1.2.1.3
cApsConfigMaxSearchUpInterval
This object is instantiated only when the standby interface
is not monitored. If both interfaces go down and the standby
interface is not monitored, successive switchovers may be used
in order to search for an interface…
secondsInteger32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.9.10.72.1.2.1.4
cApsConfigSwitchoverEnableInterval
This object specifies the value of the timer to control
the minimum interval between switchovers. After a switchover,
APS is re-enabled only after this amount of time has elapsed,
in order to prevent quick successive sw…
secondsInteger32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.9.10.72.1.2.1.5
cApsConfigMessageTransport
This object specifies the type of transport configured for
exchange of APS protocol messages. The type of transport
currently being used is indicated in the
cApsStatusMessageTransport object.

When this o…
CApsMessageTransportr/w
Type Values:
1none
2autoSelect
3dcc
4apsChannel
5ip
6osc
 .1.3.6.1.4.1.9.10.72.1.2.1.6
cApsConfigMessageHolddown
The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.

APS messages are exchanged between systems to support
bidirectional or linear operation. T…
millisecondsInteger32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.9.10.72.1.2.1.7
cApsConfigMessageHolddownCount
The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.

The maximum number of APS messages that can be sent within
one cApsConfigMessageHolddown …
Integer32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.9.10.72.1.2.1.8
cApsConfigMessageMaxInterval
The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.

An APS message is sent unconditionally, whenever the amount
of time specified by this obje…
millisecondsInteger32r/w
Constraints:
range: 1000-120000
 .1.3.6.1.4.1.9.10.72.1.2.1.9
cApsConfigFarEndGroupName
The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.

APS messages, used to support bidirectional or linear
operation, can be sent out-of-band…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.72.1.2.1.10
cApsConfigFarEndIpAddressType
This object can be set only when the value of
cApsConfigMessageTransport is 'ip'.

This object specifies the type of IP address defined
in cApsConfigFarEndIpAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.72.1.2.1.11
cApsConfigFarEndIpAddress
This object can be set only when the value of
cApsConfigMessageTransport is 'ip'.

This object specifies the IP address of the far end, which is
used as the destination address in APS messages transmitted …
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.72.1.2.1.12

cApsStatusExtTable

table
.1.3.6.1.4.1.9.10.72.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cApsStatusExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-APS-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-APS-EXT-MIB::cApsStatusExtTable' 
This table augments the cApsStatusTable.
cApsStatusExtEntry row .1.3.6.1.4.1.9.10.72.1.3.1
A conceptual row in the cApsStatusExtTable.
Indexes
No indexes recorded
Column Syntax OID
cApsStatusCdlApsBytesRcv
The current value of the APS bytes received on the
protection channel. This object applies only to CDL
interfaces. This is equivalent to cApsStatusK1K2Rcv
for SONET.
CdlApsBytes
Type Constraints:
range: 2
 .1.3.6.1.4.1.9.10.72.1.3.1.1
cApsStatusCdlApsBytesTrans
The current value of the APS bytes transmitted on the
protection channel. This object applies only to CDL
interfaces. This is equivalent to cApsStatusK1K2Trans
for SONET.
CdlApsBytes
Type Constraints:
range: 2
 .1.3.6.1.4.1.9.10.72.1.3.1.2
cApsStatusMessageTransport
This object specifies the type of transport currently being used
for exchange of APS protocol messages.

The value of this object is the same as the value specified in
the cApsConfigMessageTransport object…
CApsMessageTransport
Type Values:
1none
2autoSelect
3dcc
4apsChannel
5ip
6osc
 .1.3.6.1.4.1.9.10.72.1.3.1.3

cApsChanStatusExtTable

table
.1.3.6.1.4.1.9.10.72.1.4 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cApsChanStatusExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-APS-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-APS-EXT-MIB::cApsChanStatusExtTable' 
This table augments the cApsChanStatusTable.
cApsChanStatusExtEntry row .1.3.6.1.4.1.9.10.72.1.4.1
A conceptual row in the cApsChanStatusExtTable.
Indexes
No indexes recorded
Column Syntax OID
cApsChanStatusExtRequest
The highest priority local request for a channel in an APS
group.

This object uses only the 'Type of Request' part (bits 1-4)
of the K1 byte.
CISCO-APS-MIBCApsK1K2
Type Constraints:
range: 2
 .1.3.6.1.4.1.9.10.72.1.4.1.1

cApsChanConfigExtTable

table
.1.3.6.1.4.1.9.10.72.1.5 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cApsChanConfigExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-APS-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-APS-EXT-MIB::cApsChanConfigExtTable' 
This table augments the cApsChanConfigTable.
cApsChanConfigExtEntry row .1.3.6.1.4.1.9.10.72.1.5.1
A conceptual row in the cApsChanConfigExtTable.
Indexes
No indexes recorded
Column Syntax OID
cApsChanConfigReflectorMode
Indicates whether the channel is in reflector mode or not.
Reflector mode establishes a communication channel
between the local PTE and the remote PTE at the other
end of the SONET path.
This object has a value of true(…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.10.72.1.5.1.1

cApsChanAssociationTable

table
.1.3.6.1.4.1.9.10.72.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cApsChanAssociationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-APS-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-APS-EXT-MIB::cApsChanAssociationTable' 
This table lists the configured IP address of the 
protect/working interfaces.
cApsChanAssociationEntry row .1.3.6.1.4.1.9.10.72.1.6.1
A conceptual row in cApsChanAssociationTable.
Indexes
Column Syntax OID
cApsChanAssociationGroupName
A textual name for the APS group which this channel is
included in.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.10.72.1.6.1.1
cApsChanAssociationNumber
This field is set to a unique working/protection channel
number within an APS group. The value 0 indicates the
null channel. The values 1-14 define a working channel.
CApsChannelConfigNumber
Type Constraints:
range: 0..14
 .1.3.6.1.4.1.9.10.72.1.6.1.2
cApsChanAssociationMapNumber
This field is set to the associated working/protection
channel number corresponding to the field
cApsChanAssociationNumber within an APS group.
The value 0 indicates the null channel. The values 1-14
define a workin…
CApsChannelConfigNumber
Type Constraints:
range: 0..14
 .1.3.6.1.4.1.9.10.72.1.6.1.3
cApsChanAssociationIpAddressType
This object specifies the type of IP address defined
in cApsChanAssociationIpAddress.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.10.72.1.6.1.4
cApsChanAssociationIpAddress
IP Address of the working/protection channel.
If cApsChanAssociationNumber represents a working channel
number, this object indicates the IP Address of the associated
protection channel.
If cApsChanAssociationNumber r…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.72.1.6.1.5