CISCO-APS-MIB
This management information module supports the
configuration and management of SONET linear APS groups.
The definitions and descriptions used in this mib have
been derived from Synchronous Optical Network (SONET)
Transport Systems: Common Generic Criteria, GR-253-CORE
Revision 2, January 1999,section 5.3. The MIB is also
consistent with the Multiplex Section Protection (MSP)
protocol as specified in ITU-T Recommendation G.783,
Characteristics of synchronous digital hierarchy (SDH)
equipment function blocks, Annex A and B.
This MIB was extracted from internet draft
draft-ietf-atommib-sonetaps-mib-05.txt for SONET Linear APS
architectures, by J. Johnson, M. Thatcher, and J. Kuhfeld.
- Source file
CISCO-APS-MIB- Last revised
- Identity
cApsMIB- Base OID
1.3.6.1.4.1.9.10.71
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) transmission |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-APS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-APS-MIB::cApsMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-APS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-APS-MIB::cApsMIB'
Objects (57)
Showing 57 of 57 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.10.71 |
||
.1.3.6.1.4.1.9.10.71.1 |
||
.1.3.6.1.4.1.9.10.71.1.1 |
||
.1.3.6.1.4.1.9.10.71.1.1.1 |
||
.1.3.6.1.4.1.9.10.71.1.1.2 |
||
.1.3.6.1.4.1.9.10.71.1.1.2.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.1 |
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.10 |
||
.1.3.6.1.4.1.9.10.71.1.1.2.1.2 |
||
|
|
Enumeration
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.4 |
|
Enumeration
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.5 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.6 |
|
|
Integer32
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.7 |
|
|
Integer32
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.8 |
|
|
secondsInteger32
|
.1.3.6.1.4.1.9.10.71.1.1.2.1.9 |
|
.1.3.6.1.4.1.9.10.71.1.2 |
||
.1.3.6.1.4.1.9.10.71.1.2.1 |
||
.1.3.6.1.4.1.9.10.71.1.2.1.1 |
||
.1.3.6.1.4.1.9.10.71.1.2.1.2 |
||
|
Bits
|
.1.3.6.1.4.1.9.10.71.1.2.1.3 |
|
.1.3.6.1.4.1.9.10.71.1.2.1.4 |
||
.1.3.6.1.4.1.9.10.71.1.2.1.5 |
||
.1.3.6.1.4.1.9.10.71.1.2.1.6 |
||
.1.3.6.1.4.1.9.10.71.1.2.1.7 |
||
.1.3.6.1.4.1.9.10.71.1.2.1.8 |
||
.1.3.6.1.4.1.9.10.71.1.3 |
||
.1.3.6.1.4.1.9.10.71.1.3.1 |
||
.1.3.6.1.4.1.9.10.71.1.3.2 |
||
.1.3.6.1.4.1.9.10.71.1.3.2.1 |
||
.1.3.6.1.4.1.9.10.71.1.3.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.71.1.3.2.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.9.10.71.1.3.2.1.3 |
|
.1.3.6.1.4.1.9.10.71.1.4 |
||
.1.3.6.1.4.1.9.10.71.1.4.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.71.1.4.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.9.10.71.1.4.1.2 |
|
.1.3.6.1.4.1.9.10.71.1.4.1.3 |
||
.1.3.6.1.4.1.9.10.71.1.4.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.10.71.1.4.1.5 |
|
.1.3.6.1.4.1.9.10.71.1.5 |
||
.1.3.6.1.4.1.9.10.71.1.5.1 |
||
.1.3.6.1.4.1.9.10.71.1.5.1.1 |
||
.1.3.6.1.4.1.9.10.71.1.5.1.2 |
||
.1.3.6.1.4.1.9.10.71.1.6 |
||
.1.3.6.1.4.1.9.10.71.1.6.1 |
||
|
Bits
|
.1.3.6.1.4.1.9.10.71.1.6.1.1 |
|
.1.3.6.1.4.1.9.10.71.1.6.1.2 |
||
.1.3.6.1.4.1.9.10.71.1.6.1.3 |
||
.1.3.6.1.4.1.9.10.71.1.6.1.4 |
||
.1.3.6.1.4.1.9.10.71.1.6.1.5 |
||
.1.3.6.1.4.1.9.10.71.1.6.1.6 |
||
.1.3.6.1.4.1.9.10.71.2 |
||
.1.3.6.1.4.1.9.10.71.2.0 |
||
.1.3.6.1.4.1.9.10.71.3 |
||
.1.3.6.1.4.1.9.10.71.3.1 |
||
.1.3.6.1.4.1.9.10.71.3.2 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-APS-MIBciscoselected
Type Definitions (3)
| Enumeration |
noCmd(1)lockoutWorkingChannel(2)clearLockoutWorkingChannel(3) |
|
| OctetString |
range: 2 |
|
| Enumeration |
noCmd(1)clear(2)lockoutOfProtection(3)forcedSwitchWorkToProtect(4)forcedSwitchProtectToWork(5)manualSwitchWorkToProtect(6)manualSwitchProtectToWork(7)exercise(8) |
Conformance Groups (10)
|
cApsConfigMode cApsConfigRevert cApsConfigDirection cApsConfigExtraTraffic cApsConfigSdBerThreshold cApsConfigSfBerThreshold cApsConfigCreationTime cApsConfigRowStatus
A collection of cApsConfigTable objects providing
configuration information applicable to all linear APS groups. |
.1.3.6.1.4.1.9.10.71.3.1.1
|
|
|
The cApsConfigTable object that provides information
which is applicable to groups supporting a configurable WTR period. |
.1.3.6.1.4.1.9.10.71.3.1.2
|
|
|
The cApsCommandTable object which is applicable
to groups implementing the linear APS 1+1 architecture. Also, set operations must be supported. |
.1.3.6.1.4.1.9.10.71.3.1.3
|
|
|
A collection of cApsCommandTable objects which are
applicable to groups implementing the linear APS 1:n architecture. Also, set operations must be supported. |
.1.3.6.1.4.1.9.10.71.3.1.4
|
|
|
cApsStatusK1K2Rcv cApsStatusK1K2Trans cApsStatusCurrent cApsStatusModeMismatches cApsStatusChannelMismatches cApsStatusPSBFs cApsStatusFEPLFs cApsStatusSwitchedChannel
A collection of cApsStatusTable objects providing
status information applicable to all linear APS groups. |
.1.3.6.1.4.1.9.10.71.3.1.5
|
|
|
cApsChanConfigIfIndex cApsChanConfigRowStatus cApsChanStatusCurrent cApsChanStatusSignalDegrades cApsChanStatusSignalFailures cApsChanStatusSwitchovers cApsChanStatusLastSwitchover cApsChanStatusSwitchoverSeconds
A collection of channel objects providing information
applicable to all linear APS channels. |
.1.3.6.1.4.1.9.10.71.3.1.6
|
|
|
The cApsChanConfigTable object that provides
information which is only applicable to groups implementing the linear APS 1:n architecture. |
.1.3.6.1.4.1.9.10.71.3.1.7
|
|
|
A collection of objects providing optional counts of
configured APS groups and SONET LTE interfaces. |
.1.3.6.1.4.1.9.10.71.3.1.8
|
|
|
A collection of cApsMapTable objects providing
a mapping from sonet(39) InterfaceIndex to group name and channel number for assigned APS channels and a list of unassigned sonet(39) interfaces. |
.1.3.6.1.4.1.9.10.71.3.1.9
|
|
|
A collection of SONET linear APS notifications that may
optionally be implemented. |
.1.3.6.1.4.1.9.10.71.3.1.10
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.10.71.3.2.1The compliance statement for linear APS groups.
Required groups
| mandatory | cApsConfigGeneral | |
| mandatory | cApsStatusGeneral | |
| mandatory | cApsChanGeneral | |
| optional | cApsConfigWtr |
Implementation of this group is optional for all linear APS implementations. The information is applicable to groups supporting a configurable WTR period. |
| optional | cApsCommandOnePlusOne |
Implementation of this group is optional for all linear APS implementations. The information is applicable to groups implementing the linear APS 1+1 architecture and supporting set operations. |
| optional | cApsCommandOneToN |
Implementation of this group is optional for all linear APS implementations. The information is applicable to groups implementing the linear APS 1:n architecture and supporting set operations. |
| optional | cApsChanOneToN |
Implementation of this group is optional for all linear APS implementations. The information is applicable to groups implementing the linear APS 1:n architecture. |
| optional | cApsTotalsGroup |
Implementation of this group is optional for all linear APS implementations. |
| optional | cApsMapGroup |
Implementation of this group is optional for all linear APS implementations. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cApsConfigMode | readonly | Write access is not required. | |
| cApsConfigRevert | readonly | Write access is not required. | |
| cApsConfigDirection | readonly | Write access is not required. | |
| cApsConfigExtraTraffic | readonly | Write access is not required. | |
| cApsConfigSdBerThreshold | readonly | Write access is not required. | |
| cApsConfigSfBerThreshold | readonly | Write access is not required. | |
| cApsConfigWaitToRestore | readonly | Write access is not required. | |
| cApsConfigRowStatus | readonly | Write access is not required. | |
| cApsChanConfigIfIndex | readonly | Write access is not required. | |
| cApsChanConfigPriority | readonly | Write access is not required. | |
| cApsChanConfigRowStatus | readonly | Write access is not required. |
Notifications / Traps (5)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.10.71.2.0.1 |
An cApsEventSwitchover notification is sent when the
value of an instance of cApsChanStatusSwitchovers increments. |
|
.1.3.6.1.4.1.9.10.71.2.0.2 |
An cApsEventModeMismatch notification is sent when
the value of an instance of cApsStatusModeMismatches increments. |
|
.1.3.6.1.4.1.9.10.71.2.0.3 |
An cApsEventChannelMismatch notification is sent when
the value of an instance of cApsStatusChannelMismatches increments. |
|
.1.3.6.1.4.1.9.10.71.2.0.4 |
An cApsEventPSBF notification is sent when the
value of an instance of cApsStatusPSBFs increments. |
|
.1.3.6.1.4.1.9.10.71.2.0.5 |
An cApsEventFEPLFs notification is sent when the
value of an instance of cApsStatusFEPLFs increments. |