CISCO-6400-CHASSIS-MIB Table View

A list of redundant slot-pair entries.
          
A managment station that wish to create the redundancy
entry other than NSP should perform the following
steps:
          
Get the ciscoLS1010ModuleIndex from
ciscoLS1010ModuleTable which are mapped to the
corresponding pair of the physical slots to be
configured for redundancy.
          
Use the pair of the ciscoLS1010ModuleIndex 
and a unique entry index to create table entry.
Only the adjacent slots can be configured for
redundancy.

c64SlotConfigEntry row .1.3.6.1.4.1.9.10.27.1.1.3.1

Entry containing information for a particular pair
of redundant slots. The object value of
c64Slot1Index & c64Slot2Index refer to
the pair of ciscoLS1010ModuleIndex in
ciscoLS1010ModuleTable to be configured as redundan…

Indexes

c64SlotConfigModule1Index c64SlotConfigModule2Index

Column	Syntax	OID
c64SlotConfigModule1Index This object specify the first slot in the pair of slots to be configured for the redundacy. Its value is obtained from ciscoLS1010ModuleIndex in ciscoLS1010ModuleTable.	Integer32 Constraints: range: 1-15	.1.3.6.1.4.1.9.10.27.1.1.3.1.1
c64SlotConfigModule2Index This object specify the second slot in the pair of slots to be configured for the redundacy. Its value is the obtained from ciscoLS1010ModuleIndex in ciscoLS1010ModuleTable.	Integer32 Constraints: range: 1-15	.1.3.6.1.4.1.9.10.27.1.1.3.1.2
c64Slot1Name Name of slot#1 in the pair of slots configured to redundant.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.10.27.1.1.3.1.3
c64Slot2Name Name of slot#2 in the pair of slots configured to redundant.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.10.27.1.1.3.1.4
c64SlotConfigPrefIndexdeprecated This object specify which slot in the pair of redundancy to be used as prefer slot. The value of: primarySlot(1) is telling the system use the slot referred by c64Slot1Index as preferred s…	Enumerationr/w Enumerated Values: 1 primarySlot 2 secondarySlot	.1.3.6.1.4.1.9.10.27.1.1.3.1.5
c64SlotSwitchOver This object, when read always return a value of ok(1). Setting this object to forceOver(2) will have: For a redundant NRP slot pair, force them to exchange the primary and secondary roles. …	Enumerationr/w Enumerated Values: 1 ok 2 forceOver	.1.3.6.1.4.1.9.10.27.1.1.3.1.6
c64SlotConfigStatus The status object for the c64SlotTable entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.27.1.1.3.1.7

A list of redundant subslot pair entries.
          
A managment station that wish to create the
subslot redundancy entry should perform the
following steps:
          
Get the ciscoLS1010ModuleIndex &
ciscoLS1010SubModuleIndex from
ciscoLS1010SubModuleTable which are mapped to the
corresponding pair of the physical sub-slots to be
configured for the redundancy.
          
Use the pair of the ciscoLS1010ModuleIndex &
ciscoLS1010SubModuleIndex and an unique entry index
to create table entry. Only the adjacent sub-slots
can be configured for redundancy.

c64SubSlotConfigEntry row .1.3.6.1.4.1.9.10.27.1.1.5.1

Entry containing information for a particular pair
of redundant subslots.

Indexes

c64SubSlotConfigModule1Index c64SubSlotConfigSubModule1Index c64SubSlotConfigModule2Index c64SubSlotConfigSubModule2Index c64SubSlotRedundantIndex

Column	Syntax	OID
c64SubSlotRedundantIndex An arbitrary integer-value to uniquely identify a redundant slot pair. This value must remain constant while the NSP is running. It is not guarenteed to be constant between reboots or switchover of the NSP.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.27.1.1.5.1.1
c64SubSlotConfigModule1Index This object specify the first slot in the pair of sub-slots to be configured for the redundancy. Its value is obtained from the ciscoLS1010ModuleIndex in ciscoLS1010SubModuleTable.	Integer32 Constraints: range: 1-15	.1.3.6.1.4.1.9.10.27.1.1.5.1.2
c64SubSlotConfigSubModule1Index This object specify the first sub-slot in the pair of sub-slots to be configured for the redundancy. Its value is obtained from the ciscoLS1010SubModuleIndex in ciscoLS1010SubModuleTable.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.9.10.27.1.1.5.1.3
c64SubSlotConfigModule2Index This object specify the second slot in the pair of sub-slots to be configured for the redundancy. Its value is obtained from the ciscoLS1010ModuleIndex in ciscoLS1010SubModuleTable.	Integer32 Constraints: range: 1-15	.1.3.6.1.4.1.9.10.27.1.1.5.1.4
c64SubSlotConfigSubModule2Index This object specify the second sub-slot in the pair of sub-slots to be configured for the redundancy. Its value is obtained from the ciscoLS1010SubModuleIndex in ciscoLS1010SubModuleTable.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.9.10.27.1.1.5.1.5
c64SubSlot1Name This object is to reflect the string name in the format of #/# for the sub-slot1 in the pair of redundancy. This is produced by agent when the table entry is created.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.10.27.1.1.5.1.6
c64SubSlot2Name This object is to reflect the string name in the format of #/# for the sub-slot2 in the pair of redundancy. This is produced by agent when table entry is created.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.10.27.1.1.5.1.7
c64SubSlotConfigPrefIndexdeprecated This object specify which sub-slot in the pair of redundancy to be used as prefer sub-slot. The value of: primarySubslot(1) is telling the system use the subslot referred by c64SubSlotConf…	Enumerationr/w Enumerated Values: 1 primarySubslot 2 secondarySubslot	.1.3.6.1.4.1.9.10.27.1.1.5.1.8
c64SubSlotSwitchOver This object, when read always return a value of ok(1). Setting this object to forceOver(2) will have the result of: For a redundant subslot card pair, force the current master and slave cards (for NRPs) o…	Enumerationr/w Enumerated Values: 1 ok 2 forceOver	.1.3.6.1.4.1.9.10.27.1.1.5.1.9
c64SubSlotConfigStatus The status object for c64SubSlotConfigTable entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.27.1.1.5.1.10

A list of redundant port-pair entries.
          
A management station that wish to create the
redundant entry should perform the following
steps:
          
Get the ciscoLS1010ModuleIndex,
	 ciscoLS1010SubModuleIndex and
	 ciscoLS1010PortIndex
from ciscoLS1010PortTable which are mapped to 
the corresponding pair of the physical ports to
be configured for the redundancy.
          
Lookup the c64SubSlotConfigTable to see if
the corresponding sub-slots has been configured
for redundancy. If yes, get the entry's 
c64SubSlotRedundantIndex. Otherwise the
application should abort this port redundancy
configuration.
          	 
Use the c64SubSlotRedundantIndex value and
ciscoLS1010ModuleIndex, ciscoLS1010SubModuleIndex and
ciscoLS1010PortIndex to create table entry. Only
the adjacent ports in the adjacent sub-slots can
be configured for redundancy.

c64PortConfigEntry row .1.3.6.1.4.1.9.10.27.1.1.6.1

Entry containing information for a particual pair of
redundant ports.

Indexes

c64PortConfigModule1Index c64PortConfigSubModule1Index c64PortConfigPort1Index c64PortConfigModule2Index c64PortConfigSubModule2Index c64PortConfigPort2Index c64SubSlotRedundantIndex

Column	Syntax	OID
c64PortConfigModule1Index This object specify the first slot which contain the port to be configured as the redundancy pair. Its value is obtained from the ciscoLS1010ModuleIndex in ciscoLS1010PortTable.	Integer32 Constraints: range: 1-15	.1.3.6.1.4.1.9.10.27.1.1.6.1.1
c64PortConfigSubModule1Index This object specify the first sub-slot which contain the port to be configured as the redundancy pair. Its value is obtained from ciscoLS1010SubModuleIndex in ciscoLS1010PortTable.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.9.10.27.1.1.6.1.2
c64PortConfigPort1Index This object specify the first port in the pair of ports to be configured for the redundancy. Its value is obtained from ciscoLS1010PortIndex in ciscoLS1010PortTable.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.9.10.27.1.1.6.1.3
c64PortConfigModule2Index This object specify the second slot which contain the port to be configured as the redundancy pair. Its value is obtained from the ciscoLS1010ModuleIndex in ciscoLS1010PortTable.	Integer32 Constraints: range: 1-15	.1.3.6.1.4.1.9.10.27.1.1.6.1.4
c64PortConfigSubModule2Index This object specify the second sub-slot which contain the port to be configured as the redundancy pair. Its value is obtained from the ciscoLS1010SubModuleIndex in ciscoLS1010PortTable.	Integer32 Constraints: range: 0-1	.1.3.6.1.4.1.9.10.27.1.1.6.1.5
c64PortConfigPort2Index This object specify the second port in the pair of ports to be configured for the redundancy. Its value is obtained from the ciscoLS1010PortIndex in ciscoLS1010PortTable.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.9.10.27.1.1.6.1.6
c64Port1Name This object is to reflect the string name in the format of #/#/# for the port1 in the pair of redundancy. This is produced by agent when the table entry is created.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.10.27.1.1.6.1.7
c64Port2Name This object is to reflect the string name in the format of #/#/# for the port2 in the pair of redundancy. This is produced by agent when the table entry is created.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.10.27.1.1.6.1.8
c64PortConfigPrefIndex This object specify which port in the pair of redundancy to be used as prefer port. The value of: primaryPort(1) is telling the system use the port referred by c64PortConfigModule1Index, …	Enumerationr/w Enumerated Values: 1 primaryPort 2 secondaryPort	.1.3.6.1.4.1.9.10.27.1.1.6.1.9
c64PortSwitchOver This object, when read always return a value of ok(1). Setting this object to one of the acceptable values gives the following results: forceOver(2): Force the current working and protection ports to exch…	Enumerationr/w Enumerated Values: 1 ok 2 forceOver	.1.3.6.1.4.1.9.10.27.1.1.6.1.10
c64PortConfigStatus The status object for c64PortConfigTable entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.27.1.1.6.1.11

A table containing all instances of Sonet APS
configuration informations. To configure any APS
objects in this table, the corresponding subslots
pair have to be already configured for redundancy.

c64SonetAPSConfigEntry row .1.3.6.1.4.1.9.10.27.1.1.7.1

Entry containing APS information for a particular
interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
c64SonetAPSMode This object is used to set the APS mode on the corresponding interface referenced by ifIndex object. The value linear(1) is the APS mode of linear 1+1 nonreverting and unidirectional. This only true APS m…	Enumerationr/w Enumerated Values: 1 linear 2 yCable 3 disable	.1.3.6.1.4.1.9.10.27.1.1.7.1.1
c64SonetAPSBERThreshold This is object is used to set the Bit-Error-Rate threshold at which an APS request of priority 'Signal Degrade' will be posted. Value of 0 to disable the threshold.	Integer32r/w Constraints: range: 0-150000	.1.3.6.1.4.1.9.10.27.1.1.7.1.2
c64SonetAPSSwitchCmd This object when set except clear(4) is used to post an APS priority request. This request succeeds if no higher-priority request is posted. lockOut(1): locks out the protection channel corresponding to…	Enumerationr/w Enumerated Values: 1 lockOut 2 forceWorking 3 forceProtect 4 manualWorking 5 manualProtect 6 clear	.1.3.6.1.4.1.9.10.27.1.1.7.1.3
c64SonetAPSSFBERThreshold This is object is used to set the Signal Fail Bit-Error-Rate threshold at which an APS request of priority 'Signal Fail' will be posted. 3 => 10E-3, 4 => 10E-4, 5 => 10E-5	Integer32r/w Constraints: range: 3-5	.1.3.6.1.4.1.9.10.27.1.1.7.1.4

A table containing APS statistics and alarms
information for each interface.

c64SonetAPSStatsEntry row .1.3.6.1.4.1.9.10.27.1.1.8.1

A row in the c64SonetAPSStatsTable which corresponds
to the statistics/alarms kept by a particular
APS interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
c64SonetAPSWorkSectionStatus This variable indicates the section level status of the working channel in APS. The c64SonetAPSWorkSectionStatus is a bit map represented as a sum of multiple alarms simultaneously. The sonetSectionNoDefect should be se…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.27.1.1.8.1.1
c64SonetAPSWorkLineStatus This variable indicates the line level status of the working channel in APS. The c64SonetAPSWorkLineStatus is a bit map represented as a sum of multiple alarms simultaneously. The sonetLineNoDefect should be set if and …	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.27.1.1.8.1.2
c64SonetAPSWorkPathStatus This variable indicates the path level status of the working channel in APS. The c64SonetAPSWorkPathStatus is a bit map represented as a sum of multiple alarms simultaneously. The sonetPathNoDefect should be set if and …	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.27.1.1.8.1.3
c64SonetAPSWorkSectionBIPE This object counts the number of section BIP-8 errors in working channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.4
c64SonetAPSWorkLineBIPE This object counts the number of line BIP-8/24 errors in working channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.5
c64SonetAPSWorkLineFEBE This object counts the number of line far-end-block-errors in working channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.6
c64SonetAPSWorkPathBIPE This object counts the number of path BIP-8 errors in working channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.7
c64SonetAPSWorkPathFEBE This object counts the number of path far-end-block-errors in working channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.8
c64SonetAPSWorkPortStatus This object indicates the last aps event detected in working port.	APSEventStatus Type Values: 1 good 2 noHardware 3 doNotRevert 4 manualSwitch 5 signgalDegrade 6 forceSwitch 7 lockOut 8 adminDown	.1.3.6.1.4.1.9.10.27.1.1.8.1.9
c64SonetAPSProtectSectionStatus This variable indicates the section level status of the protection channel in APS. The c64SonetAPSProtectSectionStatus is a bit map represented as a sum of multiple alarms simultaneously. The sonetSectionNoDefect should…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.27.1.1.8.1.10
c64SonetAPSProtectLineStatus This variable indicates the line level status of the protection channel in APS. The c64SonetAPSProtectLineStatus is a bit map represented as a sum of multiple alarms simultaneously. The sonetLineNoDefect should be set i…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.27.1.1.8.1.11
c64SonetAPSProtectPathStatus This variable indicates the path level status of the protection channel in APS. The c64SonetAPSProtectPathStatus is a bit map represented as a sum of multiple alarms simultaneously. The sonetPathNoDefect should be set i…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.27.1.1.8.1.12
c64SonetAPSProtectSectionBIPE This object counts the number of section BIP-8 errors in protection channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.13
c64SonetAPSProtectLineBIPE This object counts the number of line BIP-8/24 errors in protection channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.14
c64SonetAPSProtectLineFEBE This object counts the number of line far-end-block-errors in protection channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.15
c64SonetAPSProtectPathBIPE This object counts the number of path BIP-8 errors in protection channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.16
c64SonetAPSProtectPathFEBE This object counts the number of path far-end-block-errors in protection channel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.27.1.1.8.1.17
c64SonetAPSProtectPortStatus This object indicates the last aps event detected in protection port.	APSEventStatus Type Values: 1 good 2 noHardware 3 doNotRevert 4 manualSwitch 5 signgalDegrade 6 forceSwitch 7 lockOut 8 adminDown	.1.3.6.1.4.1.9.10.27.1.1.8.1.18
c64SonetAPSChannelStatus This object indicates the last aps event detected in the APS channel.	APSEventStatus Type Values: 1 good 2 noHardware 3 doNotRevert 4 manualSwitch 5 signgalDegrade 6 forceSwitch 7 lockOut 8 adminDown	.1.3.6.1.4.1.9.10.27.1.1.8.1.19

The table contains the current alarm status in the
system.

c64ChassisAlarmEntry row .1.3.6.1.4.1.9.10.27.1.2.2.1

Entry containing alarm information occurred in the
system.

Indexes

c64ChassisAlarmIndex

Column	Syntax	OID
c64ChassisAlarmIndex An arbitrary integer value to uniquely identify a alarm information entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.10.27.1.2.2.1.1
c64ChassisAlarmSource This object indicates the source of alarm. The variable will contain string in the following formats: 'Chassis' indicate the chassis alarms 'Submodule' indicate the submodule alarms …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.10.27.1.2.2.1.2
c64ChassisAlarmType This object indicates the type of alarm.	Enumeration Enumerated Values: 1 coreTemp 2 inletTemp 3 totalFanFail 4 partialFanFail 5 fanMissing 6 pem0Fail 7 pem1Fail 8 sonetLineFail 9 cardOIRAlarm 10 cardFail 11 cardPartialFail 12 linkDownAlarm 13 networkClockAlarm 14 nrpSARFail 15 nrpPAMDataError 16 diskAlarm 17 imageAlarm 18 nrpBootUpAlarm 19 nrpSwitchoverAlarm 20 nrpSecondaryFailureAlarm 21 nrpSecondaryRemovedAlarm 22 nrpMismatchAlarm	.1.3.6.1.4.1.9.10.27.1.2.2.1.3
c64ChassisAlarmSeverity This object indicates the severity of the alarm.	Enumeration Enumerated Values: 1 minor 2 major 3 critical	.1.3.6.1.4.1.9.10.27.1.2.2.1.4
c64ChassisAlarmACOStatus This object indicates whether the audible/visible local alarm relay has been locally cut off for this particular alarm source. When this status is 'normal', the alarm in this entry has closed the local audible/visible …	Enumeration Enumerated Values: 1 normal 2 cutoff	.1.3.6.1.4.1.9.10.27.1.2.2.1.5