CERENT-MSDWDM-MIB Table View

This table allows physical layer related interface
configurations on an interface.

cMsDwdmIfConfigEntry row .1.3.6.1.4.1.3607.2.40.1.1.1

A collection of objects for configuration on an
interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cMsDwdmIfConfigProtocol This object is used to specify the protocol of the data carried over the interface. This object applies to linecards which support a variety of protocols and allow dynamic configuration of the specific …	ProtocolTyper/w Type Values: 1 other 2 unknown 4 tenGigEth 5 fibreChOrOneGigEth 7 unframed 8 sonet 9 sdh 10 sysplexIscCompatibility 11 sysplexIscPeer 12 sysplexTimerEtr 13 sysplexTimerClo 14 fastEthernet 15 fddi 16 eightGfc 17 oc768 18 otn	.1.3.6.1.4.1.3607.2.40.1.1.1.1
cMsDwdmIfConfigDataRate This object allows the management client to set the data rate across the interface. passThru denotes 2R, Reamplification and reshaping. stm1 denotes 3R, Reamp, reshaping and reclocking. stm4 denot…	Enumerationr/w Enumerated Values: 10 passThru 20 stm1 30 stm4 40 stm16 50 stm64 55 stm256 60 gigE 70 tenGigE 80 fc 90 oneGfcFicon 100 twoGfcFiconIsc3 110 escon 120 dv6000 130 sdiD1Video 140 hdtv 150 oc3 160 oc12 170 oc48 180 oc192 190 fourGfcFicon 200 tenGfc 210 isc1 220 isc3 230 oneGigIsc3 240 twoGigIsc3 250 etrClo 280 infiniBand 290 fe 300 e1t1 310 e3t3 320 oc3Ge 330 eightGfc 340 oc768 350 otu1 360 otu2 370 otu3 380 otu4 390 oneHundredGe	.1.3.6.1.4.1.3607.2.40.1.1.1.2
cMsDwdmIfConfigLoopback This object allows the management client to configure loopback for the client side or trunk side interfaces. 'noLoop' - No Loopback present. 'diagnosticLoop' - This is an internal loopback, where…	Enumerationr/w Enumerated Values: 1 noLoop 2 diagnosticLoop 3 lineLoop 4 otherLoop	.1.3.6.1.4.1.3607.2.40.1.1.1.3
cMsDwdmIfConfigWavelength This object allows the management client to configure the wavelength mode of operation to the applicable interfaces.	OpticalWavelengthr/w Type Values: 1 unknown 3 wv1529d55 4 wv1529d94 5 wv1530d33 7 wv1530d72 10 wv1531d12 12 wv1531d51 15 wv1531d90 17 wv1532d29 20 wv1532d68 22 wv1533d07 23 wv1533d47 24 wv1533d86 25 wv1534d25 27 wv1534d64 30 wv1535d04 32 wv1535d43 35 wv1535d82 37 wv1536d22 40 wv1536d61 42 wv1537d00 43 wv1537d40 44 wv1537d79 45 wv1538d19 47 wv1538d58 50 wv1538d98 52 wv1539d37 55 wv1539d77 57 wv1540d16 60 wv1540d56 62 wv1540d95 63 wv1541d35 64 wv1541d75 65 wv1542d14 66 wv1470 67 wv1542d54 68 wv1510 69 wv1590 70 wv1542d94 71 wv850 72 wv1543d33 73 wv1310 74 wv1550 75 wv1543d73 76 wv1490 77 wv1544d13 78 wv1530 79 wv1570 80 wv1544d53 81 wv1610 82 wv1544d92 83 wv1545d32 84 wv1545d72 85 wv1546d12 87 wv1546d52 90 wv1546d92 92 wv1547d32 95 wv1547d72 97 wv1548d11 100 wv1548d51 102 wv1548d91 103 wv1549d32 104 wv1549d72 105 wv1550d12 107 wv1550d52 110 wv1550d92 112 wv1551d32 115 wv1551d72 117 wv1552d12 120 wv1552d52 122 wv1552d93 123 wv1553d33 124 wv1553d73 125 wv1554d13 127 wv1554d54 130 wv1554d94 132 wv1555d34 135 wv1555d75 137 wv1556d15 140 wv1556d55 142 wv1556d96 143 wv1557d36 144 wv1557d77 145 wv1558d17 147 wv1558d58 150 wv1558d98 152 wv1559d39 155 wv1559d79 157 wv1560d20 160 wv1560d61 162 wv1561d01 164 wv1561d42 166 wv1561d83 168 wv1570d83 170 wv1571d24 172 wv1571d65 174 wv1572d06 176 wv1572d48 178 wv1572d89 180 wv1573d30 182 wv1573d71 184 wv1574d13 186 wv1574d54 188 wv1574d95 190 wv1575d37 192 wv1575d78 194 wv1576d20 196 wv1576d61 198 wv1577d03 200 wv1577d44 205 wv1577d86 210 wv1578d27 215 wv1578d69 220 wv1579d10 225 wv1579d52 230 wv1579d93 235 wv1580d35 240 wv1580d77 245 wv1581d18 250 wv1581d60 255 wv1582d02 260 wv1582d44 265 wv1582d85 270 wv1583d27 275 wv1583d69 280 wv1584d11 285 wv1584d53 290 wv1584d95 295 wv1585d36 300 wv1585d78 305 wv1586d20 310 wv1586d62 315 wv1587d04 320 wv1587d46 325 wv1587d88 330 wv1588d30 335 wv1588d73 340 wv1589d15 345 wv1589d57 350 wv1589d99 355 wv1590d41 360 wv1590d83 365 wv1591d26 370 wv1591d68 375 wv1592d10 380 wv1592d52 385 wv1592d95 390 wv1593d37 395 wv1593d79 400 wv1594d22 405 wv1594d64 410 wv1595d06 415 wv1595d49 420 wv1595d91 425 wv1596d34 430 wv1596d76 435 wv1597d19 440 wv1597d62 445 wv1598d04 450 wv1598d47 455 wv1598d89 460 wv1599d32 465 wv1599d75 470 wv1600d17 475 wv1600d60 480 wv1601d03 485 wv1601d46 490 wv1601d88 500 wv1602d31 505 wv1602d74 510 wv1603d17 515 wv1603d60 520 wv1604d03 530 firsttunablewv 540 wv1528d77	.1.3.6.1.4.1.3607.2.40.1.1.1.4
cMsDwdmIfConfigOtnStatus This object allows the management client to enable the OTN (G.709) on an applicable interface,by writing a value of 'true' to this object. To bypass the monitoring hardware, a value of 'false' is written to this ob…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3607.2.40.1.1.1.5
cMsDwdmIfConfigFECStatus This object allows the management client to enable gathering FEC ( Forward Error Correction ) counters on an applicable interface, by writing a value of 'true' to this object.To disable FEC, a value of 'false' mus…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3607.2.40.1.1.1.6
cMsDwdmIfOpticsValidIntervals This object gives the number of contiguous 15 minute intervals for which valid Optical Monitor PM data is available for the particular interface. The value of this object will be n (where n is the maximu…	Unsigned32 Constraints: range: 0-96	.1.3.6.1.4.1.3607.2.40.1.1.1.7
cMsDwdmIfOTNValidIntervals This object gives the number of contiguous 15 minute intervals for which valid OTN performance monitoring data is available for the particular interface. The value of this object will be n (where n is t…	Unsigned32 Constraints: range: 0-96	.1.3.6.1.4.1.3607.2.40.1.1.1.8
cMsDwdmIfFECValidIntervals This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The value of this object will be n (where n is the maximum number of…	Unsigned32 Constraints: range: 0-96	.1.3.6.1.4.1.3607.2.40.1.1.1.9
cMsDwdmIfConfigFECMode This object allows the management client to enable gathering FEC ( Forward Error Correction ) counters on an applicable interface, by writing a value of 'enableStandard' or 'enableEnhanced' to this object. To disabl…	Enumerationr/w Enumerated Values: 1 disable 2 enableStandard 3 enableEnhanced 4 enableEnhancedI4 5 enableEnhancedI7 6 enableEnhanced20 7 enableHG7	.1.3.6.1.4.1.3607.2.40.1.1.1.10

This table defines optical transport layer related interface
configurations on an interface.

cMsDwdmIfTransportEntry row .1.3.6.1.4.1.3607.2.40.1.2.1

A collection of objects for configuration on an
optical transport interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cMsDwdmIfTransportRingDirectionobsolete This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.	RingDirection Type Values: 1 westEast 2 eastWest	.1.3.6.1.4.1.3607.2.40.1.2.1.1
cMsDwdmIfTransportPortRule This object is used to specify the type of the optical port. A transport optical port can assume one of the following values: input(1) input-express(2) output(3) output-express(4).	OpticalPortRule Type Values: 1 inputLine 2 outputLine 3 inputCom 4 outputCom 5 inputOsc 6 outputOsc 7 inputDc 8 outputDc 9 inputExpress 10 outputExpress 11 add 12 drop 13 inputPassThru 14 inputWorking 15 outputWorking 16 inputProtected 17 outputProtected 18 inputRaman 19 outputRaman 20 com 21 ead 22 ad	.1.3.6.1.4.1.3607.2.40.1.2.1.2
cMsDwdmIfTransportPower This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.	OpticalPowerInDbm Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.2.1.3
cMsDwdmIfTransportReferencePower This object is used to specify the optical transport reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfTransportCal…	OpticalPowerInDbm Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.2.1.4
cMsDwdmIfTransportCalibratedPower This object is used to specify the optical transport calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.	OpticalPowerInDbmr/w Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.2.1.5
cMsDwdmIfTransportInsertionLoss This object is used to specify the value of Insertion Loss of the optical port.	OpticalAttenInDb Type Constraints: range: 0..400	.1.3.6.1.4.1.3607.2.40.1.2.1.6
cMsDwdmIfTransportLaserStatus This object is used to specify the status of the laser.	LaserStatus Type Values: 1 on 2 off 3 apr 4 none	.1.3.6.1.4.1.3607.2.40.1.2.1.7
cMsDwdmIfTransportAmplifierMode This object is used to specify the working amplifier mode.	OpticalAmplifierModer/w Type Values: 1 gain 2 power 3 none 4 fixed-gain	.1.3.6.1.4.1.3607.2.40.1.2.1.8
cMsDwdmIfTransportGain This object is used to specify the value of the gain of an amplifier	OpticalAttenInDb Type Constraints: range: 0..400	.1.3.6.1.4.1.3607.2.40.1.2.1.9
cMsDwdmIfTransportReferenceTilt This object is used to specify the amplifier tilt value calculated by the network element.	OpticalAttenInDb Type Constraints: range: 0..400	.1.3.6.1.4.1.3607.2.40.1.2.1.10
cMsDwdmIfTransportCalibratedTilt This object is used to specify the amplifier tilt offset added as offset by user in order to tune the network element calculated ('reference') value	OpticalAttenInDbr/w Type Constraints: range: 0..400	.1.3.6.1.4.1.3607.2.40.1.2.1.11
cMsDwdmIfTransportDCULoss This object is used to specify the value of Insertion Loss measured for the Dispersion Compensation Unit	OpticalAttenInDb Type Constraints: range: 0..400	.1.3.6.1.4.1.3607.2.40.1.2.1.12
cMsDwdmIfTransportOSRI This value indicates the status of the Optical Safety Remote Interlock Valid values are - enable(1) : the OSRI is enable disable(2) : the OSRI is disable none(3) : the OSRI functionality is not present	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 none	.1.3.6.1.4.1.3607.2.40.1.2.1.13
cMsDwdmIfTransportExpectedGain This object is used to specify the value of the expected gain of an amplifier	OpticalAttenInDbr/w Type Constraints: range: 0..400	.1.3.6.1.4.1.3607.2.40.1.2.1.14
cMsDwdmIfTransportSideIdentifier This object is used to specify the facing side of the optical port.	SideIdentifier Type Values: 0 unknownSide 1 sideA 2 sideB 3 sideC 4 sideD 5 sideE 6 sideF 7 sideG 8 sideH 9 sideI 10 sideJ 11 sideK 12 sideL 13 sideM 14 sideN 15 sideO 16 sideP 17 sideQ 18 sideR 19 sideS 20 sideT	.1.3.6.1.4.1.3607.2.40.1.2.1.15
cMsDwdmIfTransportAddPower This object is used to specify the ADD optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.	OpticalPowerInDbm Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.2.1.16
cMsDwdmIfTransportOSCPower This object is used to specify the OSC optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.	OpticalPowerInDbm Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.2.1.17
cMsDwdmIfTransportTDCUCompensation This object is used to specify the TDCU Compensation value of the optical port belong to a TDCU card.	TDCUCompensation Type Values: -1 psnmNotApplicable 0 psnm0 1 psnmFineMinus45 2 psnmFineMinus90 3 psnmFineMinus135 4 psnmFineMinus180 5 psnmFineMinus225 6 psnmFineMinus270 7 psnmFineMinus315 8 psnmFineMinus360 9 psnmFineMinus405 10 psnmFineMinus450 11 psnmFineMinus495 12 psnmFineMinus540 13 psnmFineMinus585 14 psnmFineMinus630 15 psnmFineMinus675 16 psnmCoarseMinus110 17 psnmCoarseMinus220 18 psnmCoarseMinus330 19 psnmCoarseMinus440 20 psnmCoarseMinus550 21 psnmCoarseMinus660 22 psnmCoarseMinus770 23 psnmCoarseMinus880 24 psnmCoarseMinus990 25 psnmCoarseMinus1100 26 psnmCoarseMinus1210 27 psnmCoarseMinus1320 28 psnmCoarseMinus1430 29 psnmCoarseMinus1540 30 psnmCoarseMinus1650	.1.3.6.1.4.1.3607.2.40.1.2.1.18

This table defines optical multiplex section (band) layer 
related interface configurations on an interface.

cMsDwdmIfMultiplexSectionEntry row .1.3.6.1.4.1.3607.2.40.1.3.1

A collection of objects for configuration on an
optical multiplex section (band) interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cMsDwdmIfMultiplexSectionRingDirectionobsolete This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.	RingDirection Type Values: 1 westEast 2 eastWest	.1.3.6.1.4.1.3607.2.40.1.3.1.1
cMsDwdmIfMultiplexSectionPortRule This object is used to specify the type of the optical port. A Multiplex Section optical port can assume one of the following values: add(5) drop(6).	OpticalPortRule Type Values: 1 inputLine 2 outputLine 3 inputCom 4 outputCom 5 inputOsc 6 outputOsc 7 inputDc 8 outputDc 9 inputExpress 10 outputExpress 11 add 12 drop 13 inputPassThru 14 inputWorking 15 outputWorking 16 inputProtected 17 outputProtected 18 inputRaman 19 outputRaman 20 com 21 ead 22 ad	.1.3.6.1.4.1.3607.2.40.1.3.1.2
cMsDwdmIfMultiplexSectionPower This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.	OpticalPowerInDbm Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.3.1.3
cMsDwdmIfMultiplexSectionReferencePower This object is used to specify the optical Multiplex Section reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfMult…	OpticalPowerInDbm Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.3.1.4
cMsDwdmIfMultiplexSectionCalibratedPower This object is used to specify the optical MultiplexSection calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.	OpticalPowerInDbmr/w Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.3.1.5
cMsDwdmIfMultiplexSectionInsertionLoss This object is used to specify the value of Insertion Loss of the optical port.	OpticalAttenInDb Type Constraints: range: 0..400	.1.3.6.1.4.1.3607.2.40.1.3.1.6
cMsDwdmIfMultiplexSectionActualBand This object is used to specify the value of Wavelength group which is tuned the optical port.	OpticalBand Type Values: 1 unknown 5 bn1530d33To1532d68 25 bn1534d25To1536d61 45 bn1538d19To1540d56 65 bn1542d14To1544d53 85 bn1546d12To1548d51 105 bn1550d12To1552d52 125 bn1554d13To1556d55 145 bn1558d17To1560d61	.1.3.6.1.4.1.3607.2.40.1.3.1.7
cMsDwdmIfMultiplexSectionExpectedBand This object is used to specify the value of Wavelength group that the user expects the optical port will assume.	OpticalBandr/w Type Values: 1 unknown 5 bn1530d33To1532d68 25 bn1534d25To1536d61 45 bn1538d19To1540d56 65 bn1542d14To1544d53 85 bn1546d12To1548d51 105 bn1550d12To1552d52 125 bn1554d13To1556d55 145 bn1558d17To1560d61	.1.3.6.1.4.1.3607.2.40.1.3.1.8
cMsDwdmIfMultiplexSectionSideIdentifier This object is used to specify the facing side of the optical port.	SideIdentifier Type Values: 0 unknownSide 1 sideA 2 sideB 3 sideC 4 sideD 5 sideE 6 sideF 7 sideG 8 sideH 9 sideI 10 sideJ 11 sideK 12 sideL 13 sideM 14 sideN 15 sideO 16 sideP 17 sideQ 18 sideR 19 sideS 20 sideT	.1.3.6.1.4.1.3607.2.40.1.3.1.9

This table defines optical channel layer 
related interface configurations on an interface.

cMsDwdmIfChannelEntry row .1.3.6.1.4.1.3607.2.40.1.4.1

A collection of objects for configuration on an
optical channel interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cMsDwdmIfChannelRingDirectionobsolete This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.	RingDirection Type Values: 1 westEast 2 eastWest	.1.3.6.1.4.1.3607.2.40.1.4.1.1
cMsDwdmIfChannelPortRule This object is used to specify the type of the optical port. A Multiplex Section optical port can assume one of the following values: add(5) drop(6).	OpticalPortRule Type Values: 1 inputLine 2 outputLine 3 inputCom 4 outputCom 5 inputOsc 6 outputOsc 7 inputDc 8 outputDc 9 inputExpress 10 outputExpress 11 add 12 drop 13 inputPassThru 14 inputWorking 15 outputWorking 16 inputProtected 17 outputProtected 18 inputRaman 19 outputRaman 20 com 21 ead 22 ad	.1.3.6.1.4.1.3607.2.40.1.4.1.2
cMsDwdmIfChannelPower This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.	OpticalPowerInDbm Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.4.1.3
cMsDwdmIfChannelReferencePower This object is used to specify the optical Multiplex Section reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfChan…	OpticalPowerInDbm Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.4.1.4
cMsDwdmIfChannelCalibratedPower This object is used to specify the optical Channel calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.	OpticalPowerInDbmr/w Type Constraints: range: -1000 range: -400..250	.1.3.6.1.4.1.3607.2.40.1.4.1.5
cMsDwdmIfChannelInsertionLoss This object is used to specify the value of Insertion Loss of the optical port.	OpticalAttenInDb Type Constraints: range: 0..400	.1.3.6.1.4.1.3607.2.40.1.4.1.6
cMsDwdmIfChannelActualWavelength This object is used to specify the value of Wavelength that is tuned the optical port.	OpticalWavelength Type Values: 1 unknown 3 wv1529d55 4 wv1529d94 5 wv1530d33 7 wv1530d72 10 wv1531d12 12 wv1531d51 15 wv1531d90 17 wv1532d29 20 wv1532d68 22 wv1533d07 23 wv1533d47 24 wv1533d86 25 wv1534d25 27 wv1534d64 30 wv1535d04 32 wv1535d43 35 wv1535d82 37 wv1536d22 40 wv1536d61 42 wv1537d00 43 wv1537d40 44 wv1537d79 45 wv1538d19 47 wv1538d58 50 wv1538d98 52 wv1539d37 55 wv1539d77 57 wv1540d16 60 wv1540d56 62 wv1540d95 63 wv1541d35 64 wv1541d75 65 wv1542d14 66 wv1470 67 wv1542d54 68 wv1510 69 wv1590 70 wv1542d94 71 wv850 72 wv1543d33 73 wv1310 74 wv1550 75 wv1543d73 76 wv1490 77 wv1544d13 78 wv1530 79 wv1570 80 wv1544d53 81 wv1610 82 wv1544d92 83 wv1545d32 84 wv1545d72 85 wv1546d12 87 wv1546d52 90 wv1546d92 92 wv1547d32 95 wv1547d72 97 wv1548d11 100 wv1548d51 102 wv1548d91 103 wv1549d32 104 wv1549d72 105 wv1550d12 107 wv1550d52 110 wv1550d92 112 wv1551d32 115 wv1551d72 117 wv1552d12 120 wv1552d52 122 wv1552d93 123 wv1553d33 124 wv1553d73 125 wv1554d13 127 wv1554d54 130 wv1554d94 132 wv1555d34 135 wv1555d75 137 wv1556d15 140 wv1556d55 142 wv1556d96 143 wv1557d36 144 wv1557d77 145 wv1558d17 147 wv1558d58 150 wv1558d98 152 wv1559d39 155 wv1559d79 157 wv1560d20 160 wv1560d61 162 wv1561d01 164 wv1561d42 166 wv1561d83 168 wv1570d83 170 wv1571d24 172 wv1571d65 174 wv1572d06 176 wv1572d48 178 wv1572d89 180 wv1573d30 182 wv1573d71 184 wv1574d13 186 wv1574d54 188 wv1574d95 190 wv1575d37 192 wv1575d78 194 wv1576d20 196 wv1576d61 198 wv1577d03 200 wv1577d44 205 wv1577d86 210 wv1578d27 215 wv1578d69 220 wv1579d10 225 wv1579d52 230 wv1579d93 235 wv1580d35 240 wv1580d77 245 wv1581d18 250 wv1581d60 255 wv1582d02 260 wv1582d44 265 wv1582d85 270 wv1583d27 275 wv1583d69 280 wv1584d11 285 wv1584d53 290 wv1584d95 295 wv1585d36 300 wv1585d78 305 wv1586d20 310 wv1586d62 315 wv1587d04 320 wv1587d46 325 wv1587d88 330 wv1588d30 335 wv1588d73 340 wv1589d15 345 wv1589d57 350 wv1589d99 355 wv1590d41 360 wv1590d83 365 wv1591d26 370 wv1591d68 375 wv1592d10 380 wv1592d52 385 wv1592d95 390 wv1593d37 395 wv1593d79 400 wv1594d22 405 wv1594d64 410 wv1595d06 415 wv1595d49 420 wv1595d91 425 wv1596d34 430 wv1596d76 435 wv1597d19 440 wv1597d62 445 wv1598d04 450 wv1598d47 455 wv1598d89 460 wv1599d32 465 wv1599d75 470 wv1600d17 475 wv1600d60 480 wv1601d03 485 wv1601d46 490 wv1601d88 500 wv1602d31 505 wv1602d74 510 wv1603d17 515 wv1603d60 520 wv1604d03 530 firsttunablewv 540 wv1528d77	.1.3.6.1.4.1.3607.2.40.1.4.1.7
cMsDwdmIfChannelExpectedWavelength This object is used to specify the value of Wavelength that the user expects the optical port will assume.	OpticalWavelengthr/w Type Values: 1 unknown 3 wv1529d55 4 wv1529d94 5 wv1530d33 7 wv1530d72 10 wv1531d12 12 wv1531d51 15 wv1531d90 17 wv1532d29 20 wv1532d68 22 wv1533d07 23 wv1533d47 24 wv1533d86 25 wv1534d25 27 wv1534d64 30 wv1535d04 32 wv1535d43 35 wv1535d82 37 wv1536d22 40 wv1536d61 42 wv1537d00 43 wv1537d40 44 wv1537d79 45 wv1538d19 47 wv1538d58 50 wv1538d98 52 wv1539d37 55 wv1539d77 57 wv1540d16 60 wv1540d56 62 wv1540d95 63 wv1541d35 64 wv1541d75 65 wv1542d14 66 wv1470 67 wv1542d54 68 wv1510 69 wv1590 70 wv1542d94 71 wv850 72 wv1543d33 73 wv1310 74 wv1550 75 wv1543d73 76 wv1490 77 wv1544d13 78 wv1530 79 wv1570 80 wv1544d53 81 wv1610 82 wv1544d92 83 wv1545d32 84 wv1545d72 85 wv1546d12 87 wv1546d52 90 wv1546d92 92 wv1547d32 95 wv1547d72 97 wv1548d11 100 wv1548d51 102 wv1548d91 103 wv1549d32 104 wv1549d72 105 wv1550d12 107 wv1550d52 110 wv1550d92 112 wv1551d32 115 wv1551d72 117 wv1552d12 120 wv1552d52 122 wv1552d93 123 wv1553d33 124 wv1553d73 125 wv1554d13 127 wv1554d54 130 wv1554d94 132 wv1555d34 135 wv1555d75 137 wv1556d15 140 wv1556d55 142 wv1556d96 143 wv1557d36 144 wv1557d77 145 wv1558d17 147 wv1558d58 150 wv1558d98 152 wv1559d39 155 wv1559d79 157 wv1560d20 160 wv1560d61 162 wv1561d01 164 wv1561d42 166 wv1561d83 168 wv1570d83 170 wv1571d24 172 wv1571d65 174 wv1572d06 176 wv1572d48 178 wv1572d89 180 wv1573d30 182 wv1573d71 184 wv1574d13 186 wv1574d54 188 wv1574d95 190 wv1575d37 192 wv1575d78 194 wv1576d20 196 wv1576d61 198 wv1577d03 200 wv1577d44 205 wv1577d86 210 wv1578d27 215 wv1578d69 220 wv1579d10 225 wv1579d52 230 wv1579d93 235 wv1580d35 240 wv1580d77 245 wv1581d18 250 wv1581d60 255 wv1582d02 260 wv1582d44 265 wv1582d85 270 wv1583d27 275 wv1583d69 280 wv1584d11 285 wv1584d53 290 wv1584d95 295 wv1585d36 300 wv1585d78 305 wv1586d20 310 wv1586d62 315 wv1587d04 320 wv1587d46 325 wv1587d88 330 wv1588d30 335 wv1588d73 340 wv1589d15 345 wv1589d57 350 wv1589d99 355 wv1590d41 360 wv1590d83 365 wv1591d26 370 wv1591d68 375 wv1592d10 380 wv1592d52 385 wv1592d95 390 wv1593d37 395 wv1593d79 400 wv1594d22 405 wv1594d64 410 wv1595d06 415 wv1595d49 420 wv1595d91 425 wv1596d34 430 wv1596d76 435 wv1597d19 440 wv1597d62 445 wv1598d04 450 wv1598d47 455 wv1598d89 460 wv1599d32 465 wv1599d75 470 wv1600d17 475 wv1600d60 480 wv1601d03 485 wv1601d46 490 wv1601d88 500 wv1602d31 505 wv1602d74 510 wv1603d17 515 wv1603d60 520 wv1604d03 530 firsttunablewv 540 wv1528d77	.1.3.6.1.4.1.3607.2.40.1.4.1.8
cMsDwdmIfChannelSideIdentifier This object is used to specify the facing side of the optical port.	SideIdentifier Type Values: 0 unknownSide 1 sideA 2 sideB 3 sideC 4 sideD 5 sideE 6 sideF 7 sideG 8 sideH 9 sideI 10 sideJ 11 sideK 12 sideL 13 sideM 14 sideN 15 sideO 16 sideP 17 sideQ 18 sideR 19 sideS 20 sideT	.1.3.6.1.4.1.3607.2.40.1.4.1.9

This table provides objects for configuring OTN ( G.709 )
thresholds on trunk side interfaces.

cMsDwdmOtnThresholdsEntry row .1.3.6.1.4.1.3607.2.40.2.1.1

An entry in the cMsDwdmOtnThresholdsTable.

Indexes

IF-MIBifIndex cMsDwdmOtnThreshMonType cMsDwdmOtnThreshIntervalType

Column	Syntax	OID
cMsDwdmOtnThreshMonType This object is an index to the cMsDwdmOtnThresholdsTable. It is used to specify the type of monitoring threshold being set on an interface for OTN ( G.709 ) statistics.	MonitorType Type Values: 1 path 2 section 3 tcm1 4 tcm2	.1.3.6.1.4.1.3607.2.40.2.1.1.1
cMsDwdmOtnThreshIntervalType This object is an index to the cMsDwdmOtnThresholdsTable. It specifies the interval type and monitoring location for the performance statistics.	LocationAndIntervalType Type Values: 1 nearEnd15Min 2 nearEndOneDay 3 farEnd15Min 4 farEndOneDay	.1.3.6.1.4.1.3607.2.40.2.1.1.2
cMsDwdmOtnThreshFC This object is used to set the threshold for the number of failure counts on applicable trunk side interfaces.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.1.1.3
cMsDwdmOtnThreshES This object is used to set the threshold for the number of Errored Seconds on applicable trunk side interfaces.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.1.1.4
cMsDwdmOtnThreshSES This object is used to set the threshold for the number of Severely Errored Seconds on applicable trunk side interfaces.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.1.1.5
cMsDwdmOtnThreshUAS This object is used to set the threshold for the number of Unavailable Seconds on applicable trunk side interfaces.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.1.1.6
cMsDwdmOtnThreshBBE This object is used to set the threshold for the number of Bit Block Errors on applicable trunk side interfaces.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.1.1.7

This table contains the cumulative OTN (G.709) PM stats    
for the trunk side interfaces.

cMsDwdmOtnCurrentEntry row .1.3.6.1.4.1.3607.2.40.2.2.1

An entry in the cMsDwdmOtnCurrentTable.

Indexes

IF-MIBifIndex cMsDwdmOtnCurrentMonType cMsDwdmOtnCurIntervalType

Column	Syntax	OID
cMsDwdmOtnCurrentMonType This object is an index to the cMsDwdmOtnCurrentTable. It is used to otain G.709 statistics for path, section and tcm ( tandem connection).	MonitorType Type Values: 1 path 2 section 3 tcm1 4 tcm2	.1.3.6.1.4.1.3607.2.40.2.2.1.1
cMsDwdmOtnCurIntervalType This object is an index to the cMsDwdmOtnCurrentTable. It specifies the interval type (farEnd/ nearEnd and 15 min/ 1 Day )for the table objects.	LocationAndIntervalType Type Values: 1 nearEnd15Min 2 nearEndOneDay 3 farEnd15Min 4 farEndOneDay	.1.3.6.1.4.1.3607.2.40.2.2.1.2
cMsDwdmOtnCurrentFC The counter associated with the number of failure counts encountered on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.2.1.3
cMsDwdmOtnCurrentES The counter associated with the number of Errored Seconds encountered on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.2.1.4
cMsDwdmOtnCurrentSES The counter associated with the number of Severely Errored Seconds encountered on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.2.1.5
cMsDwdmOtnCurrentUAS The counter associated with the number of Unavailable Seconds encountered on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.2.1.6
cMsDwdmOtnCurrentBBE The counter associated with the number of Background Block Errors encountered on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.2.1.7
cMsDwdmOtnCurrentESR The counter associated with the Errored Seconds Ratio on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.2.1.8
cMsDwdmOtnCurrentSESR The counter associated with the Severely Errored Seconds ratio on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.2.1.9
cMsDwdmOtnCurrentBBER The counter associated with the Background Block Errors ratio on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.2.1.10

This table contains the cumulative OTN (G.709) PM stats    
for the trunk side interfaces.

cMsDwdmOtnIntervalEntry row .1.3.6.1.4.1.3607.2.40.2.3.1

An entry in the cMsDwdmOtnIntervalTable.

Indexes

IF-MIBifIndex cMsDwdmOtnIntervalMonType cMsDwdmOtnIntervalType cMsDwdmOtnIntervalNum

Column	Syntax	OID
cMsDwdmOtnIntervalMonType This object is an index to the cMsDwdmOtnIntervalTable. It is used to otain G.709 statistics for path, section and tcm ( tandem connection).	MonitorType Type Values: 1 path 2 section 3 tcm1 4 tcm2	.1.3.6.1.4.1.3607.2.40.2.3.1.1
cMsDwdmOtnIntervalType This object is an index to the cMsDwdmOtnIntervalTable. It specifies the interval type (farEnd/ nearEnd and 15 min/ 1 Day )for the table objects.	LocationAndIntervalType Type Values: 1 nearEnd15Min 2 nearEndOneDay 3 farEnd15Min 4 farEndOneDay	.1.3.6.1.4.1.3607.2.40.2.3.1.2
cMsDwdmOtnIntervalNum This object is an index to the cMsDwdmOtnIntervalTable. This object gives the number of the interval. It is a number between 1 and 96, which identifies the interval for which the set of OTN performance values is availa…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.3607.2.40.2.3.1.3
cMsDwdmOtnIntervalFC The counter associated with the number of failure counts encountered on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.3.1.4
cMsDwdmOtnIntervalES The counter associated with the number of Errored Seconds encountered on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.3.1.5
cMsDwdmOtnIntervalSES The counter associated with the number of Severely Errored Seconds encountered on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.3.1.6
cMsDwdmOtnIntervalUAS The counter associated with the number of Unavailable Seconds encountered on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.3.1.7
cMsDwdmOtnIntervalBBE The counter associated with the number of Background Block Errors encountered on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.3.1.8
cMsDwdmOtnIntervalESR The counter associated with the Errored Seconds Ratio on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.3.1.9
cMsDwdmOtnIntervalSESR The counter associated with the Severely Errored Seconds ratio on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.3.1.10
cMsDwdmOtnIntervalBBER The counter associated with the Background Block Errors ratio on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.2.3.1.11
cMsDwdmOtnIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3607.2.40.2.3.1.12

This table contains the configurable thresholds     
for FEC ( Forward Error Correction ) statistics.

cMsDwdmFECThresholdsEntry row .1.3.6.1.4.1.3607.2.40.3.1.1

An entry in the cMsDwdmFECThresholdsTable.

Indexes

IF-MIBifIndex cMsDwdmFECThreshIntervalType

Column	Syntax	OID
cMsDwdmFECThreshIntervalType This object is an index to the cMsDwdmFECThreshTable. It gives the type of the interval for which the thresholds are being set.	CERENT-TCCerentPeriod Type Values: 1 unknown 5 minutes1 10 minutes15 20 hour1 30 day1	.1.3.6.1.4.1.3607.2.40.3.1.1.1
cMsDwdmFECThreshBitErrCor This object sets the threshold value of the number of Bit Errors Corrected on an applicable trunk side interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.1.1.2
cMsDwdmFECThreshByteErrCor This object sets the threshold value of the number of Byte Errors Corrected on an applicable trunk side interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.1.1.3
cMsDwdmFECThreshZeroErrDet This object sets the threshold value of the number of zero bit errors detected on an applicable trunk side interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.1.1.4
cMsDwdmFECThreshOneErrDet This object sets the threshold value of the number of one bit errors detected on an applicable trunk side interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.1.1.5
cMsDwdmFECThreshUncorWords This object sets the threshold value of the number of Uncorrectable Words on an applicable trunk side interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.1.1.6

This table contains the cumulative PM statistics    
for FEC ( Forward Error Correction ) on an applicable 
interface.

cMsDwdmFECCurrentEntry row .1.3.6.1.4.1.3607.2.40.3.2.1

An entry in the cMsDwdmFECCurrentTable.

Indexes

IF-MIBifIndex cMsDwdmFECCurIntervalType

Column	Syntax	OID
cMsDwdmFECCurIntervalType This object is an index to the cMsDwdmFECCurrentTable. It gives the type of interval for which the FEC values have been collected.	CERENT-TCCerentPeriod Type Values: 1 unknown 5 minutes1 10 minutes15 20 hour1 30 day1	.1.3.6.1.4.1.3607.2.40.3.2.1.1
cMsDwdmFECCurrentBitErrCor The counter associated with the number of Bit Errors Corrected on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.2.1.2
cMsDwdmFECCurrentByteErrCor The counter associated with the number of Byte Errors Corrected on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.2.1.3
cMsDwdmFECCurrentZeroErrDet The counter associated with the number of zero bit errors detected on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.2.1.4
cMsDwdmFECCurrentOneErrDet The counter associated with the number of one bit errors detected on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.2.1.5
cMsDwdmFECCurrentUncorWords The counter associated with the number of Uncorrectable Words encountered on this interface in the current interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.2.1.6

This table contains the cumulative PM statistics    
for FEC ( Forward Error Correction ) on an applicable 
interface.

cMsDwdmFECIntervalEntry row .1.3.6.1.4.1.3607.2.40.3.3.1

An entry in the cMsDwdmFECIntervalTable.

Indexes

IF-MIBifIndex cMsDwdmFECIntervalType cMsDwdmFECIntervalNum

Column	Syntax	OID
cMsDwdmFECIntervalType This object is an index to the cMsDwdmFECIntervalTable. It gives the type of interval for which the FEC values have been collected.	CERENT-TCCerentPeriod Type Values: 1 unknown 5 minutes1 10 minutes15 20 hour1 30 day1	.1.3.6.1.4.1.3607.2.40.3.3.1.1
cMsDwdmFECIntervalNum This object is an index to the cMsDwdmFECIntervalTable. It is a number between 1 and 96, which identifies the interval for which the set of FEC PM values is available. The interval identified by 1 is th…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.3607.2.40.3.3.1.2
cMsDwdmFECIntervalBitErrCor The counter associated with the number of Bit Errors Corrected on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.3.1.3
cMsDwdmFECIntervalByteErrCor The counter associated with the number of Byte Errors Corrected on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.3.1.4
cMsDwdmFECIntervalZeroErrDet The counter associated with the number of zero bit errors detected on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.3.1.5
cMsDwdmFECIntervalOneErrDet The counter associated with the number of one bit errors detected on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.3.1.6
cMsDwdmFECIntervalUncorWords The counter associated with the number of Uncorrectable Words encountered on this interface in a particular interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.3.3.1.7
cMsDwdmFECIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3607.2.40.3.3.1.8

This table contains the configurable thresholds    
for the 8B10B stats.

c8B10BThresholdsEntry row .1.3.6.1.4.1.3607.2.40.4.1.1

An entry in the c8B10BThresholds Table.

Indexes

IF-MIBifIndex c8B10BThreshIntervalType

Column	Syntax	OID
c8B10BThreshIntervalType This object is an index to the c8B10BThresholdsTable. It gives the type of interval.	IntervalType Type Values: 1 fifteenMin 2 oneDay	.1.3.6.1.4.1.3607.2.40.4.1.1.1
c8B10BThreshInvalidPkts This object represents the lower word value of the threshold associated with the number of 8B10B invalid packets. The object c8B10BThreshIPOverflow contains the higher 32 bit value of this number.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.2
c8B10BThreshIPOverflow This object represents the higher word value of the threshold associated with the number of 8B10B invalid packets. The object c8B10BThreshInvalidPkts contains the lower 32 bits of this number. If the th…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.3
c8B10BThreshHCInvalidPkts This object is used to obtain the value of threshold configured for the number of 8B10B Invalid Packets. This a High capacity ( 64 bits ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.1.1.4
c8B10BThreshValidPkts This object represents the lower word value of the threshold associated with the number of 8B10B valid packets. The object c8B10BThreshVPOverflow contains the higher 32 bit value of this number.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.5
c8B10BThreshVPOverflow This object represents the higher word value of the threshold associated with the number of 8B10B valid packets. The object c8B10BThreshValidPkts contains the lower 32 bits of this number. If the thresh…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.6
c8B10BThreshHCValidPkts This object is used to obtain the value of threshold configured for the number of 8B10B Valid Packets. This a High capacity ( 64 bits ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.1.1.7
c8B10BThreshIdleSets This object represents the lower word value of the threshold associated with the number of 8B10B idle sets. The object c8B10BThreshISOverflow contains the higher 32 bit value of this number.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.8
c8B10BThreshISOverflow This object represents the higher word value of the threshold associated with the number of 8B10B idle sets. The object c8B10BThreshIdleSets contains the lower 32 bits of this number. If the threshold i…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.9
c8B10BThreshHCIdleSets This object is used to obtain the value of threshold configured for the number of 8B10B idle sets. This a High capacity ( 64 bits ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.1.1.10
c8B10BThreshNonIdleSets This object represents the lower word value of the threshold associated with the number of 8B10B non idle sets. The object c8B10BThreshNISOverflow contains the higher 32 bit value of this number.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.11
c8B10BThreshNISOverflow This object represents the higher word value of the threshold associated with the number of 8B10B non idle sets. The object c8B10BThreshNonIdleSets contains the lower 32 bits of this number. If the thre…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.12
c8B10BThreshHCNonIdleSets This object is used to obtain the value of threshold configured for the number of 8B10B non idle sets. This a High capacity ( 64 bits ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.1.1.13
c8B10BThreshDataSets This object represents the lower word value of the threshold associated with the number of 8B10B data code groups. The object c8B10BThreshDSOverflow contains the higher 32 bit value of this number.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.14
c8B10BThreshDSOverflow This object represents the higher word value of the threshold associated with the number of 8B10B data code groups. The object c8B10BThreshDataSets contains the lower 32 bits of this number. If the thre…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.15
c8B10BThreshHCDataSets This object is used to obtain the value of threshold configured for the number of 8B10B data code groups. This a High capacity ( 64 bits ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.1.1.16
c8B10BThreshCodeViols This object represents the lower word value of the threshold associated with the number of 8B10B coding violations encountered. The object c8B10BThreshCVOverflow contains the higher 32 bit value of thi…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.17
c8B10BThreshCVOverflow This object represents the higher word value of threshold associated with the number of 8B10B code violations encountered. The object c8B10BThreshCodeViols contains the lower 32 bits of this number. If…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.1.1.18
c8B10BThreshHCCodeViols This object is used to obtain the value of threshold configured for the number of 8B10B Coding Violations on this interface. This a High capacity ( 64 bits ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.1.1.19

This table contains the cumulative PM statistics    
for the Fiber Channel/ Gigabit Ethernet (8B10B) 
on the applicable interfaces.

c8B10BCurrentEntry row .1.3.6.1.4.1.3607.2.40.4.2.1

An entry in the c8B10BCurrentTable.

Indexes

IF-MIBifIndex c8B10BCurIntervalType

Column	Syntax	OID
c8B10BCurIntervalType This object is an index to the c8B10BCurrentTable. It gives the type of interval for which 8B10B data has been collected.	IntervalType Type Values: 1 fifteenMin 2 oneDay	.1.3.6.1.4.1.3607.2.40.4.2.1.1
c8B10BCurrentCodeViols This object gives the value of the number of 8B10B Coding Violations encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B1…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.2
c8B10BCurrentCVOverflow This object gives the higher word value the number of 8B10B Coding Violations encountered on an interface for the current interval. If the value of c8B10BCurrentCodeViols is greater than 4,294,967,295, the higher word…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.3
c8B10BCurrentHCCodeViols The counter associated with the number of 8B10B coding violations encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.2.1.4
c8B10BCurrentValidPkts This object gives the value of the number of 8B10B Valid Packets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BC…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.5
c8B10BCurrentVPOverflow This object gives the higher word value the number of 8B10B valid packets encountered on an interface for the current interval. If the value of c8B10BCurrentValidPkts is greater than 4,294,967,295, the higher word val…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.6
c8B10BCurrentHCValidPkts The counter associated with the number of 8B10B valid packets on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.2.1.7
c8B10BCurrentInvalidPkts This object gives the value of the number of 8B10B invalid packets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.8
c8B10BCurrentIPOverflow This object gives the higher word value the number of 8B10B invalid packets encountered on an interface for the current interval. If the value of c8B10BCurrentInvalidPkts is greater than 4,294,967,295, the higher word…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.9
c8B10BCurrentHCInvalidPkts The counter associated with the number of 8B10B invalid packets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.2.1.10
c8B10BCurrentIdleSets This object gives the value of the number of 8B10B Idle sets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurre…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.11
c8B10BCurrentISOverflow This object gives the higher word value the number of 8B10B idle sets encountered on an interface for the current interval. If the value of c8B10BCurrentIdleSets is greater than 4,294,967,295, the higher word value wi…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.12
c8B10BCurrentHCIdleSets The counter associated with the number of 8B10B idle sets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.2.1.13
c8B10BCurrentNonIdleSets This object gives the value of the number of 8B10B non idle sets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BC…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.14
c8B10BCurrentNISOverflow This object gives the higher word value the number of 8B10B non idle sets encountered on an interface for the current interval. If the value of c8B10BCurrentNonIdleSets is greater than 4,294,967,295, the higher word v…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.15
c8B10BCurrentHCNonIdleSets The counter associated with the number of 8B10B non-idle sets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.2.1.16
c8B10BCurrentDataSets This object gives the value of the number of 8B10B data code groups encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B1…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.17
c8B10BCurrentDSOverflow This object gives the higher word value the number of 8B10B data code groups encountered on an interface for the current interval. If the value of c8B10BCurrentDataSets is greater than 4,294,967,295, the higher word v…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.2.1.18
c8B10BCurrentHCDataSets The counter associated with the number of 8B10B data code groups encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.2.1.19

This table contains the cumulative PM statistics    
for the Fiber Channel/ Gigabit Ethernet (8B10B) 
on the applicable interfaces.

c8B10BIntervalEntry row .1.3.6.1.4.1.3607.2.40.4.3.1

An entry in the c8B10BIntervalTable.

Indexes

IF-MIBifIndex c8B10BIntervalType c8B10BIntervalNum

Column	Syntax	OID
c8B10BIntervalType This object is an index to the c8B10BIntervalTable. It gives the type of interval for which 8B10B data has been collected.	IntervalType Type Values: 1 fifteenMin 2 oneDay	.1.3.6.1.4.1.3607.2.40.4.3.1.1
c8B10BIntervalNum This object gives the number of the interval. It is a number between 1 and 96, which identifies the interval for which the set of 8B10B performance values is available. The interval identified by 1 is t…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.3607.2.40.4.3.1.2
c8B10BIntervalCodeViols This object gives the value of the number of 8B10B Coding Violations encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.3
c8B10BIntervalCVOverflow This object gives the higher word value the number of 8B10B Coding Violations encountered on an interface for a particular interval. If the value of c8B10BIntervalCodeViols is greater than 4,294,967,295, the higher wo…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.4
c8B10BIntervalHCCodeViols The counter associated with the number of 8B10B coding violations encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.3.1.5
c8B10BIntervalValidPkts This object gives the value of the number of 8B10B Valid Packets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10B…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.6
c8B10BIntervalVPOverflow This object gives the higher word value the number of 8B10B valid packets encountered on an interface for a particular interval. If the value of c8B10BIntervalValidPkts is greater than 4,294,967,295, the higher word v…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.7
c8B10BIntervalHCValidPkts The counter associated with the number of 8B10B valid packets on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.3.1.8
c8B10BIntervalInvalidPkts This object gives the value of the number of 8B10B invalid packets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B1…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.9
c8B10BIntervalIPOverflow This object gives the higher word value the number of 8B10B invalid packets encountered on an interface for a particular interval. If the value of c8B10BIntervalInvalidPkts is greater than 4,294,967,295, the higher wo…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.10
c8B10BIntervalHCInvalidPkts The counter associated with the number of 8B10B invalid packets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.3.1.11
c8B10BIntervalIdleSets This object gives the value of the number of 8B10B Idle sets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BInte…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.12
c8B10BIntervalISOverflow This object gives the higher word value the number of 8B10B idle sets encountered on an interface for a particular interval. If the value of c8B10BIntervalIdleSets is greater than 4,294,967,295, the higher word value …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.13
c8B10BIntervalHCIdleSets The counter associated with the number of 8B10B idle sets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.3.1.14
c8B10BIntervalNonIdleSets This object gives the value of the number of 8B10B non idle sets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10B…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.15
c8B10BIntervalNISOverflow This object gives the higher word value the number of 8B10B non idle sets encountered on an interface for a particular interval. If the value of c8B10BIntervalNonIdleSets is greater than 4,294,967,295, the higher word…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.16
c8B10BIntervalHCNonIdleSets The counter associated with the number of 8B10B non-idle sets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.3.1.17
c8B10BIntervalDataSets This object gives the value of the number of 8B10B data code groups encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.18
c8B10BIntervalDSOverflow This object gives the higher word value the number of 8B10B data code groups encountered on an interface for a particular interval. If the value of c8B10BIntervalDataSets is greater than 4,294,967,295, the higher word…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3607.2.40.4.3.1.19
c8B10BIntervalHCDataSets The counter associated with the number of 8B10B data code groups encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3607.2.40.4.3.1.20
c8B10BIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3607.2.40.4.3.1.21