CADANT-CMTS-MAC-MIB Table View

This table is the inverse of docsIfCmtsMacToCmTable

cadIfCmtsPtrToMacEntry row .1.3.6.1.4.1.4998.1.1.20.2.5.1

Indexes

cadIfCmtsCmPtr

Column	Syntax	OID
cadIfCmtsCmPtr An row index into the docsIfCmtsCmStatusTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4998.1.1.20.2.5.1.1
cadIfCmtsCmMac The MAC address this CMPtr is for.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.5.1.2

This table extends the cadifCmtsCmStatusTable and adds 4 objects
which reflect the state of subscriber management on a particular CM.

cadSubMgtCpeControlEntry row .1.3.6.1.4.1.4998.1.1.20.2.6.1

Indexes

No indexes recorded

Column	Syntax	OID
cadSubMgtCpeControlMaxCpeIpv4	Integer32 Constraints: range: 0-1023	.1.3.6.1.4.1.4998.1.1.20.2.6.1.1
cadSubMgtCpeControlActive	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.2.6.1.2
cadSubMgtCpeControlLearnable	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.2.6.1.3
cadSubMgtCpeControlReset	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.2.6.1.4
cadSubMgtCpeControlMaxCpeIpv6Addresses This attribute represents the number of simultaneous IPv6 prefixes permitted ofr CPE connected to the CM.	Integer32 Constraints: range: 0-1023	.1.3.6.1.4.1.4998.1.1.20.2.6.1.5
cadSubMgtCpeControlLastReset This attribute represents the system Up Time of the last set to 'true' of the Reset attribute of this instance. Zero if never reset.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.4998.1.1.20.2.6.1.6

see dot1dTpFdbTable

cadTpFdbEntry row .1.3.6.1.4.1.4998.1.1.20.2.9.1

see CadTpFdbEntry

Indexes

cadTpFdbAddress cadTpFdbIfIndex

Column	Syntax	OID
cadTpFdbAddress see dot1dTpFdbAddress	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.9.1.1
cadTpFdbIfIndex The ifIndex of the bridge port this MAC address was learned on. For ECard ports, this is the ifIndex of eport itself. However, for DCard ports, this is the ifIndex of the DOCSIS MacLayer (ifType=127). IfIndices of types…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.2.9.1.2
cadTpFdbStatus see dot1dTpFdbStatus	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.4998.1.1.20.2.9.1.3

The ARP table. It can easily used for mapping from IP
addresses to physical addresses.

cadArpEntry row .1.3.6.1.4.1.4998.1.1.20.2.13.1

Each entry contains one IpAddress to MAC address
equivalence.

Indexes

cadArpIfIndex cadArpAddressType cadArpNetAddress cadArpL3IfIndex

Column	Syntax	OID
cadArpIfIndex The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.2.13.1.1
cadArpAddressType The IP address type for this MAC to IP address entry router interface.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4998.1.1.20.2.13.1.2
cadArpNetAddress The IpAddress corresponding to the media-dependent 'physical' address.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.1.3.6.1.4.1.4998.1.1.20.2.13.1.3
cadArpMacAddress The 'physical' address associated with this IP address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.13.1.4
cadArpType The type of mapping. See IpNetToPhysicalType in the IP-MIB for a description.	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 dynamic 4 static 5 local	.1.3.6.1.4.1.4998.1.1.20.2.13.1.5
cadArpState The state of the mapping. See ipNetToPhysicalState in the IP-MIB for a description.	Enumeration Enumerated Values: 1 reachable 2 stale 3 delay 4 probe 5 invalid 6 unknown 7 incomplete	.1.3.6.1.4.1.4998.1.1.20.2.13.1.6
cadArpL3IfIndex The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4998.1.1.20.2.13.1.7

This table provide for referencing the service flows 
associated with a particular cable modem. This allows 
for indexing into other docsQos tables that are 
indexed by service flow ID and ifIndex.

cadQosCmtsMacToSrvFlowEntry row .1.3.6.1.4.1.4998.1.1.20.2.15.1

An entry is created by CMTS for each service flow
connected to this CMTS.

Indexes

cadQosCmtsCmMac cadQosCmtsServiceFlowId

Column	Syntax	OID
cadQosCmtsCmMac The MAC address for the referenced CM.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.15.1.1
cadQosCmtsServiceFlowId An index assigned to a service flow by CMTS.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.4998.1.1.20.2.15.1.2
cadQosCmtsIfIndex The ifIndex of ifType docsCableMacLayter(127) on the CMTS that is connected to the Cable Modem.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.2.15.1.3

This table extends the docQosServiceClassTable and adds 1 object
which is the peak traffic rate shaped to while traffic still conforms to
the policing parameters.

cadQosServiceClassEntry row .1.3.6.1.4.1.4998.1.1.20.2.19.1

Indexes

No indexes recorded

Column	Syntax	OID
cadQosServiceClassPeakTrafficRate Peak traffic rate shaped to while traffic still conforms to the policing parameters (Tmax and Burst). If the peak rate is set to a value greater than Tmax, then the traffic will be shaped to the peak rate until the tr…	DOCS-QOS3-MIBBitRater/w	.1.3.6.1.4.1.4998.1.1.20.2.19.1.1
cadQosServiceClassLatencyControlledFlowFlag This object indicated whether the flow should be should be latency-controlled. If this flag is not true than the legacy (bitrate-based) scheduler will be used.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.2.19.1.2

The table of known and configured cable modem vendors as identified
by the first three bytes of their MAC address, also known as the OUI

cadCmtsCmVendorEntry row .1.3.6.1.4.1.4998.1.1.20.2.20.1

Each row contains an OUI-to-vendor association

Indexes

cadCmtsCmVendorOUI

Column	Syntax	OID
cadCmtsCmVendorOUI First three(3) bytes of the MAC address of the cable modems	CADANT-TCOUIAddress Type Constraints: range: 3	.1.3.6.1.4.1.4998.1.1.20.2.20.1.1
cadCmtsCmVendorName Name of the cable modem vendor using this OUI	OctetStringr/w Constraints: range: 0-46	.1.3.6.1.4.1.4998.1.1.20.2.20.1.2
cadCmtsCmVendorRowStatus Control object for each row	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.2.20.1.3

This table provides a SNMP style wrapper to the
MAC DB with a direct translation from MAC to the
IP address and CM MAC associated with the CM or CPE MAC.

cadIfCmtsMacToIpEntry row .1.3.6.1.4.1.4998.1.1.20.2.21.1

Per MAC information stored in MAC DB

Indexes

cadIfCmtsMacAddr

Column	Syntax	OID
cadIfCmtsMacAddr MAC address of CM or CPE	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.21.1.1
cadIfCmtsMacCmMacAddr Mac address of the CM associated with the MAC address. If this is an entry for a CM, the it will be the same as the cadIfCmtsmac. For a CPE MAC, this will be the MAC address of the CM.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.21.1.3
cadIfCmtsMacInetIpAddrdeprecated Inet Ip address (IPv4 or IPv6)associated with this CM or CPE MAC address.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.1.3.6.1.4.1.4998.1.1.20.2.21.1.4
cadIfCmtsMacInetIpAddrTypedeprecated Inet Ip address type (IPv4 or IPv6)associated with this CM or CPE MAC address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4998.1.1.20.2.21.1.5

The list of cable modems that is configured to be denied for traffic.
Maximum number of rows is 100.

cadCmDenyEntry row .1.3.6.1.4.1.4998.1.1.20.2.22.1

The collection of deny modems.

Indexes

cadCmDenyMacAddress

Column	Syntax	OID
cadCmDenyMacAddress The MAC address of the CM that is denied for any traffic.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.22.1.1
cadCmDenyRowStatus The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). Support of the values includes createAndGo(4) and destroy(6)	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.2.22.1.2

Table of cable modem deny status.

cadCmDenyStatusEntry row .1.3.6.1.4.1.4998.1.1.20.2.23.1

Entry of cable modem deny status.

Indexes

cadCmDenyMacAddress cadCmDenyRecentIfIndex

Column	Syntax	OID
cadCmDenyRecentIfIndex The ifIndex of upstream channel where the denied modem was last on or attempted.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.2.23.1.1
cadCmDenyRecentTime The actual clock time when the modem was last denied.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4998.1.1.20.2.23.1.2
cadCmDenyAttempts The number of attempts received from the denied modem.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4998.1.1.20.2.23.1.3

Inet MAC DB interface for SNMP

cadIfCmtsInetIpToCmMacEntry row .1.3.6.1.4.1.4998.1.1.20.2.25.1

Per IP information stored in MAC DB

Indexes

cadIfCmtsInetIpMacAddrType cadIfCmtsInetIpMac

Column	Syntax	OID
cadIfCmtsInetIpMacAddrType Inet IP address type of CM or CPE	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4998.1.1.20.2.25.1.1
cadIfCmtsInetIpMac Inet IP address of CM or CPE	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.1.3.6.1.4.1.4998.1.1.20.2.25.1.2
cadIfCmtsInetIpCmMac Mac address of CM associated with this CM or CPE IP	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.25.1.3
cadIfCmtsInetIpCpeMac Mac address of CPE associated with this CPE IP. This is set to 0 for CM IPs.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.25.1.4

This object defines the SID clusters associated with
an upstream service flow.

cadQosServiceFlowSidClusterEntry row .1.3.6.1.4.1.4998.1.1.20.2.28.1

The conceptual row of cadQosServiceFlowSidClusterTable.
The ifIndex key corresponds to the MAC Domain interface
of the service flow. The index scheme used upstream channel ifIndex intead of channel ID
to speed up query…

Indexes

IF-MIBifIndex DOCS-QOS3-MIBdocsQosServiceFlowId DOCS-QOS3-MIBdocsQosServiceFlowSidClusterId cadQosServiceFlowSidClusterChIfIndex

Column	Syntax	OID
cadQosServiceFlowSidClusterChIfIndex This key represents the upstream Channel ifIndex mapped to the corresponding SID.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.2.28.1.1
cadQosServiceFlowSidClusterUcid This attribute represents the UCID assigned to the upstream channel in this SID Cluster.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.4998.1.1.20.2.28.1.2
cadQosServiceFlowSidClusterSid This attribute represents the SID assigned to the upstream channel in this SID Cluster.	Unsigned32 Constraints: range: 1-16383	.1.3.6.1.4.1.4998.1.1.20.2.28.1.3
cadQosServiceFlowSegHdr This object indicates the segment header in a MTCM enabled flow is on or off.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.4998.1.1.20.2.28.1.4

This table provides a SNMP style wrapper to the
MAC DB with a direct translation from MAC to the
IP address and CM MAC associated with the CM or CPE MAC.

cadIfCmtsMacToInetIpEntry row .1.3.6.1.4.1.4998.1.1.20.2.29.1

Per MAC information stored in MAC DB

Indexes

cadIfCmtsMacAddr cadIfCmtsMacToInetIpAddrType cadIfCmtsMacToInetIpAddr

Column	Syntax	OID
cadIfCmtsMacToInetIpAddrType Inet Ip address type (IPv4 or IPv6)associated with this CM or CPE MAC address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4998.1.1.20.2.29.1.1
cadIfCmtsMacToInetIpAddr Inet Ip address (IPv4 or IPv6)associated with this CM or CPE MAC address.	CADANT-TCInetAddressIPv4or6 Type Constraints: range: 0 range: 4 range: 8 range: 16 range: 20	.1.3.6.1.4.1.4998.1.1.20.2.29.1.2
cadIfCmtsMacToInetIpCmMacAddr Mac address of the CM associated with the MAC address. If this is an entry for a CM, the it will be the same as the cadIfCmtsmac. For a CPE MAC, this will be the MAC address of the CM.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.29.1.3

This object describes an enforce rule list
For the Integrated SC Agility feature on a CMTS.
Each object instance defines an enforce rule.

cadEnforceRuleEntry row .1.3.6.1.4.1.4998.1.1.20.2.30.2.1

The conceptual row of cadEnforceRuleTable.

Indexes

cadEnforceRuleReferenceSCN

Column	Syntax	OID
cadEnforceRuleReferenceSCN This attribute represents the Service Class Name from which the reference parameter set values for a SF were derived. This ASCII string acts as a handle pointing to the Service Class Name In the docsQosParamSetTable. T…	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.1
cadEnforceRuleEnforceSCN This attribute represents the Service Class Name from which the penalty parameter set values are derived. Must be specified. This ASCII string acts as a handle pointing to the Service Class Name In the docsQosParamSetT…	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.2
cadEnforceRuleAvgBwRateUsageTrigger The threshold bandwidth (in kilobits per second) above which the service flow is identified as being a Heavy User below which the service flow is identified as being a Light User. This must be specified.	kilobits per secondInteger32r/w Constraints: range: 100-500000	.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.3
cadEnforceRuleAvgHistoryDuration The duration of time (in minutes) that is used to monitor and calculate the average bandwidth for each service flow associated with this Enforce Rule. In essence, we will use a sliding window with a duration specifie…	minutesInteger32r/w Constraints: range: 30-1440	.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.4
cadEnforceRuleSamplingInterval The period of time (in minutes) between successive slides of the sliding window. It is also the temporal distance over which the sliding window is moved whenever it is slid. The penalty duration and window duration mu…	minutesInteger32r/w Constraints: range: 30-30 range: 15-15 range: 10-10 range: 5-5	.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.5
cadEnforceRulePenaltyDuration The duration of time (in minutes) that a monitored service flow is held in the penalty box after it has been found to be a Heavy User. Being placed in the penalty box implies that the service flow has had its Priorit…	minutesInteger32r/w Constraints: range: 30-10080	.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.6
cadEnforceRuleCreateTime The value of sysUpTime in seconds when this rule was created. Set to new sysUpTime if created before last boot.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.7
cadEnforceRuleStatus The conceptual row status of this object.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.2.30.2.1.8

This object contains the number of times an enforce
rule has been used to penalize a service flow.

cadEnforceRuleCountsEntry row .1.3.6.1.4.1.4998.1.1.20.2.30.3.1

The conceptual row of cadEnforceRuleCountsTable.

Indexes

No indexes recorded

Column	Syntax	OID
cadEnforceRuleCountsPenalties Number of times the CM has had a SF penalized by this Enforce Rule.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4998.1.1.20.2.30.3.1.1

This table extends the docQosServiceClassTable and adds control
features for service classes.

cadQosServiceClassControlEntry row .1.3.6.1.4.1.4998.1.1.20.2.31.1.1

This is an extension of the DocsQosServiceClassEntry
table that provides additional service class control features.

Indexes

No indexes recorded

Column	Syntax	OID
cadQosServiceClassControlSendDsc This variable always returns false(2) upon reading. When set to true(1), a DSC updating the SF parameters is sent to all CMs having a SF matching this SCN name and whose QOS parameter set is out-of-date.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.20.2.31.1.1.1
cadQosServiceClassControlSendDscLastUpdated The time that cadQosServiceClassControlSendDsc was written for this row. If it was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. Used to…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.4998.1.1.20.2.31.1.1.2

This table extends the docQosServiceClassTable and adds a per-CM 
control feature for service classes.

cadQosServiceClassCmControlEntry row .1.3.6.1.4.1.4998.1.1.20.2.31.2.1

This is an extension of the DocsQosServiceClassEntry
table that provides additional service class control features.

Indexes

No indexes recorded

Column	Syntax	OID
cadQosServiceClassCmControlSendDscMacAddr This variable always returns 00:00:00:00:00:00 upon reading. When set to any other value, a DSC updating the SF parameters in the CM whose MAC address matches the value written is sent, providing that there is a SF ma…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.31.2.1.1

This table contains DOCSIS 3.1 CM
Capabilities from CM registration requests.

cadIfCmtsCmOfdmStatusEntry row .1.3.6.1.4.1.4998.1.1.20.2.32.1

An entry has the capabilities from the registration
request for one CM.

Indexes

cadIfCmtsCmOfdmStatusMacAddress

Column	Syntax	OID
cadIfCmtsCmOfdmStatusMacAddress The MAC address of the modem.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.32.1.1
cadIfCmtsCmOfdmStatusOkOfdmMod The OFDM modulations supported by the CM, as reported in TLV 5.52. QAM8 and QAM32 are not allowed for DS channels.	CADANT-CMTS-DOWNCHANNEL-MIBCerOfdmModBitsType Type Values: 0 qam32768 1 qam16384 2 qam8192 3 qam4096 4 qam2048 5 qam1024 6 qam512 7 qam256 8 qam128 9 qam64 10 qam32 11 qam16 12 qam8 13 qpsk 14 bpsk 15 zeroBitload	.1.3.6.1.4.1.4998.1.1.20.2.32.1.2
cadIfCmtsCmOfdmStatusOkOfdmaMod The OFDMA US modulations supported by the CM, as reported in TLV 5.53.	CADANT-CMTS-DOWNCHANNEL-MIBCerOfdmModBitsType Type Values: 0 qam32768 1 qam16384 2 qam8192 3 qam4096 4 qam2048 5 qam1024 6 qam512 7 qam256 8 qam128 9 qam64 10 qam32 11 qam16 12 qam8 13 qpsk 14 bpsk 15 zeroBitload	.1.3.6.1.4.1.4998.1.1.20.2.32.1.3
cadIfCmtsCmOfdmStatusDsLowFreq The low DS edge frequency (Downstream Lower Band Edge) supported by the CM,as reported in TLV 5.54.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.20.2.32.1.4
cadIfCmtsCmOfdmStatusDsHighFreq The high DS edge frequency (Downstream Upper Band Edge) supported by the CM, as reported in TLV 5.55.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.20.2.32.1.5
cadIfCmtsCmOfdmStatusUsHighFreq The high US edge frequency (Diplexor Upper Band Edge) supported by the CM,as reported in TLV 5.56.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.20.2.32.1.6

This table contains the OFDM and OFDMA channels and profiles 
assigned to DOCSIS 3.1 CMs, and their status.

cadIfCmtsCmOfdmProfEntry row .1.3.6.1.4.1.4998.1.1.20.2.33.1

An entry describes one channel and profile assigned to
a DOCSIS 3.1 CM.

Indexes

cadIfCmtsCmOfdmProfMacAddress cadIfCmtsCmOfdmProfIfIndex cadIfCmtsCmOfdmProfProfId

Column	Syntax	OID
cadIfCmtsCmOfdmProfMacAddress The MAC address of the modem.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.20.2.33.1.1
cadIfCmtsCmOfdmProfIfIndex The ifIndex of an OFDM DS or OFDMA US channel.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.20.2.33.1.2
cadIfCmtsCmOfdmProfProfId The profile number plus one of this profile for a DS channel. The data IUC number for a US channel. Range is (1..16|256) for downstream channels, and (5|6|9|10|11|12|13) for upstream channels.	CADANT-CMTS-DOWNCHANNEL-MIBOfdmProfileId Type Constraints: range: 1..3 range: 256	.1.3.6.1.4.1.4998.1.1.20.2.33.1.3
cadIfCmtsCmOfdmProfDirection Whether the channel is downstream or upstream.	DOCS-IF3-MIBIfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.4.1.4998.1.1.20.2.33.1.4
cadIfCmtsCmOfdmProfStatus Active if there are no issues for this profile for this CM on this channel. Impaired when we receive a CM-STATUS message of type ofdmProfileFailure, for OFDM channels, or due to excessive errors seen by the receiver,…	Enumerationr/w Enumerated Values: 1 active 2 impaired	.1.3.6.1.4.1.4998.1.1.20.2.33.1.5

Each entry of this table defines the description text  
associated with a single subscriber management filter group.
The object exists independent of the existence of the  
particular filter group (docsSubmgt3FilterGrpTable 
(DOCS-SUBMGT3-MIB))

cadSubmgtFilterGrpDescEntry row .1.3.6.1.4.1.4998.1.1.20.2.34.1

The conceptual row of cadSubmgtFilterGrpDescTable.

Indexes

cadSubmgtFilterGrpId

Column	Syntax	OID
cadSubmgtFilterGrpId This key is an identifier for a set of classifiers known as a filter group. Each CM may be associated with several filter groups for its upstream and downstream traffic, one group per target end point on the CM …	Unsigned32 Constraints: range: 1-1024	.1.3.6.1.4.1.4998.1.1.20.2.34.1.1
cadSubmgtFilterGrpDescription A user-defined description of the filter group (1 to 32 human- readable characters).	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4998.1.1.20.2.34.1.2
cadSubmgtFilterGrpRowStatus Control object for row creation and deletion. Support limited to active(1), createAndGo(4), destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.20.2.34.1.3