APPC-MIB Table View

APPC Local LU Admin Table.

appcLluAdminEntry row .1.3.6.1.2.1.34.3.1.2.1.1

Information about local APPC LUs.

Indexes

appcLluAdminName

Column	Syntax	OID
appcLluAdminName Specifies the name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.1.1.1
appcLluAdminDepType This value identifies whether the LU is dependent or independent.	Enumeration Enumerated Values: 1 dependent 2 independent	.1.3.6.1.2.1.34.3.1.2.1.1.2
appcLluAdminLocalAddress The local address for this LU is a byte with a value ranging from 0 to 254. For dependent LUs, this value ranges from 1 to 254; for independent LUs this value is always 0.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.34.3.1.2.1.1.3
appcLluAdminSessLimit The maximum number of sessions supported by this LU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.1.1.4
appcLluAdminBindRspMayQ Indicates whether or not the local LU, as the sender of a BIND request, allows a partner partner LU to delay sending the BIND response if the partner LU cannot process the BIND request immediately.	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.1.1.5
appcLluAdminCompression Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). prohibited - specifies that no compression is to be used. required …	Enumeration Enumerated Values: 1 prohibited 2 required 3 negotiable	.1.3.6.1.2.1.34.3.1.2.1.1.6
appcLluAdminInBoundCompLevel Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcLluAdminCompression for negotiation during session activation (SNA BIND). none - specifi…	Enumeration Enumerated Values: 1 none 2 rle 3 lz9 4 lz10 5 lz12	.1.3.6.1.2.1.34.3.1.2.1.1.7
appcLluAdminOutBoundCompLevel Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcLluAdminCompression for negotiation during session activation (SNA BIND). …	Enumeration Enumerated Values: 1 none 2 rle 3 lz9 4 lz10 5 lz12	.1.3.6.1.2.1.34.3.1.2.1.1.8
appcLluAdminCompRleBeforeLZ Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU uses this value for negotiation during session activation (SNA BIND). This parameter is only…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.1.1.9
appcLluAdminAlias A local alias for the local LU. If not known or not applicable, this object contains a zero-length string.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.2.1.1.10

APPC Local LU Operational Table.

appcLluOperEntry row .1.3.6.1.2.1.34.3.1.2.2.1

Information about local APPC LUs.

Indexes

appcLluOperName

Column	Syntax	OID
appcLluOperName Specifies the name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.2.1.1
appcLluOperDepType This value identifies whether the LU is dependent or independent.	Enumeration Enumerated Values: 1 dependent 2 independent	.1.3.6.1.2.1.34.3.1.2.2.1.2
appcLluOperLocalAddress The local address for this LU is a byte with a value ranging from 0 to 254. For dependent LUs, this value ranges from 1 to 254; for independent LUs this value is always 0.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.34.3.1.2.2.1.3
appcLluOperSessLimit The maximum number of sessions supported by this LU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.2.1.4
appcLluOperBindRspMayQ Indicates whether or not the local LU, as the sender of a BIND request, allows a partner LU to delay sending the BIND response if the partner LU cannot process the BIND request immediately.	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.2.1.5
appcLluOperCompression Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). prohibited - specifies that no compression is to be used. required…	Enumeration Enumerated Values: 1 prohibited 2 required 3 negotiable	.1.3.6.1.2.1.34.3.1.2.2.1.6
appcLluOperInBoundCompLevel Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcLluOperCompression for negotiation during session activation (SNA BIND). no…	Enumeration Enumerated Values: 1 none 2 rle 3 lz9 4 lz10 5 lz12	.1.3.6.1.2.1.34.3.1.2.2.1.7
appcLluOperOutBoundCompLevel Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcLluAdminCompression for negotiation during session activation (SNA BIND). …	Enumeration Enumerated Values: 1 none 2 rle 3 lz9 4 lz10 5 lz12	.1.3.6.1.2.1.34.3.1.2.2.1.8
appcLluOperCompRleBeforeLZ Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU uses this value for negotiation during session activation (SNA BIND). This parameter is only…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.2.1.9
appcLluOperAlias A local alias for the local LU. If not known or not applicable, this object contains a zero-length string.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.2.2.1.10
appcLluOperActiveSessions Specifies the total number of active APPC sessions for this LU.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.2.2.1.11

APPC Partner LU administrative Table

appcLuPairAdminEntry row .1.3.6.1.2.1.34.3.1.2.3.1

Entry of APPC Partner LU Information Table.
It is indexed by the local and partner LU Names.

Indexes

appcLuPairAdminLocLuName appcLuPairAdminParLuName

Column	Syntax	OID
appcLuPairAdminLocLuName The SNA name of the local LU to which this partner LU definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.3.1.1
appcLuPairAdminParLuName The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.3.1.2
appcLuPairAdminParLuAlias A local alias for the partner LU. If not known or not applicable, this object contains a zero-length string.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.2.3.1.3
appcLuPairAdminSessLimit The maximum number of sessions supported by this partner LU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.3.1.4
appcLuPairAdminSessSec Specifies the type of session-level security information that a local LU will accept on BIND requests it receives from the partner LU. required - Specifies that the BIND request must carry …	Enumeration Enumerated Values: 1 required 2 accepted 3 notAllowed	.1.3.6.1.2.1.34.3.1.2.3.1.5
appcLuPairAdminSecAccept Specifies support for different levels of access security information in ATTACH requests received from this partner LU. Possible values are: none - No access security information …	Enumeration Enumerated Values: 1 none 2 conversation 3 alreadyVerified 4 persistentVerification 5 aVandpV	.1.3.6.1.2.1.34.3.1.2.3.1.6
appcLuPairAdminLinkObjId Specifies the link associated with this partner LU. This value points to the row in the table containing information on the link instance. (e.g., the sdlcLSAdminTable of the SNA DLC MIB module). This o…	SNMPv2-TCInstancePointer Description: A pointer to either a specific instance of a MIB object or a conceptual row of a MIB table in the managed device. In the latter case, by convention, it is the name of the particular instance of the first accessible col…	.1.3.6.1.2.1.34.3.1.2.3.1.7
appcLuPairAdminParaSessSup Defined Parallel Sessions Supported. Indicates whether or not multiple sessions between the partner LU and its associated local LU are permitted. Parallel session support also indicates that Change Numbe…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.3.1.8

Table of active partner/local LU pairs.  Two entries are
present in the table when both LUs in a pair are local.

appcLuPairOperEntry row .1.3.6.1.2.1.34.3.1.2.4.1

Entry representing one partner/local LU pair.

Indexes

appcLuPairOperLocLuName appcLuPairOperParLuName

Column	Syntax	OID
appcLuPairOperLocLuName The SNA name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. If this object has the same valu…	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.4.1.1
appcLuPairOperParLuName The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.4.1.2
appcLuPairOperParLuAlias A local alias for the partner LU. If not known or not applicable, this object contains a zero-length string.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.2.4.1.3
appcLuPairOperSessLimit The maximum number of sessions supported by this partner LU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.4.1.4
appcLuPairOperSessSec Specifies the type of security information that a local LU will accept on BIND requests it receives from the partner LU. required - Specifies that the BIND request must carry session …	Enumeration Enumerated Values: 1 required 2 accepted 3 notAllowed	.1.3.6.1.2.1.34.3.1.2.4.1.5
appcLuPairOperSecAccept Specifies support for different levels of security acceptance information in ATTACH requests received from this partner LU. Possible values are: none - No access security informat…	Enumeration Enumerated Values: 1 none 2 conversation 3 alreadyVerified 4 persistentVerification 5 aVandpV	.1.3.6.1.2.1.34.3.1.2.4.1.6
appcLuPairOperLinkObjId Specifies the link associated with this partner LU. This value points to the row in the table containing information on the link instance. (e.g., the sdlcLSAdminTable of the SNA DLC MIB module). This object may be NU…	SNMPv2-TCInstancePointer Description: A pointer to either a specific instance of a MIB object or a conceptual row of a MIB table in the managed device. In the latter case, by convention, it is the name of the particular instance of the first accessible col…	.1.3.6.1.2.1.34.3.1.2.4.1.7
appcLuPairOperParaSessSup Active Parallel Sessions Supported. Indicates whether or not multiple session between the partner LU and its associated local LU are permitted. Parallel session support also indicates that Change Number …	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.4.1.8
appcLuPairOperParaSessSupLS Active Parallel Sessions Supported - last starting value. This object represents the initial value proposed by the local LU the last time this capability was negotiated, i.e., when the first session was b…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.4.1.9
appcLuPairOperState The value identifies the current operational state of this LU pair: inactive (1) - no active or pending session exists between the LUs. active (2) - an active or p…	Enumeration Enumerated Values: 1 inactive 2 active	.1.3.6.1.2.1.34.3.1.2.4.1.10

APPC Mode Table

appcModeAdminEntry row .1.3.6.1.2.1.34.3.1.2.5.1

Entry of APPC Mode Information Table.

Indexes

appcModeAdminLocLuName appcModeAdminParLuName appcModeAdminModeName

Column	Syntax	OID
appcModeAdminLocLuName The SNA name of the local LU to which this mode definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.5.1.1
appcModeAdminParLuName The SNA name of the partner LU to which this mode definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.5.1.2
appcModeAdminModeName Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characters).	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.2.5.1.3
appcModeAdminCosName Specifies the class of service (COS) name associated with this mode. If the implementation does not support COS names, a null string is returned.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.2.5.1.4
appcModeAdminSessEndTpName Specifies the name of the transaction program (TP) to be invoked when a session using this mode is deactivated or ended. If no such TP is defined, this object is a null string. When the TP name consists entirely of dis…	OctetString Constraints: range: 0-64	.1.3.6.1.2.1.34.3.1.2.5.1.5
appcModeAdminMaxSessLimit Specifies the maximum value that the local LU is to use, during CNOS processing, for the session limit. The local LU, as a target LU, will negotiate a higher session limit it receives in the CNOS request…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.6
appcModeAdminMinCwinLimit Specifies the default minimum contention winner sessions limit. Some implementations internally issue a INITIALIZE_SESSION_LIMIT verb when a Mode is created. This value is the parameter used for the CNOS processing of…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.7
appcModeAdminMinClosLimit Specifies the default minimum contention loser sessions limit. Some implementations internally issue a INITIALIZE_SESSION_LIMIT verb when a Mode is created. This value is the parameter used for the CNOS processing of t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.8
appcModeAdminConWinAutoActLmt Specifies the limit on the number of contention winner sessions to be automatically activated when the minimum number of contention winner sessions increases (as a result of CNOS processing). The actual number of sessi…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.9
appcModeAdminRecvPacWinSz Specifies the size of the receive pacing window. This value is used for negotiation during session activations (SNA BIND). The meaning of this value when set to 0 depends on whether adaptive pacing is sup…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.10
appcModeAdminSendPacWinSz Specifies the size of the send pacing window. This value is used for negotiation during session activations (SNA BIND). The meaning of this value when set to 0 depends on whether adaptive pacing is suppor…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.11
appcModeAdminPrefRecvRuSz Specifies the preferred receive RU (Request Unit) size of normal-flow requests on the sessions. This value must be less than or equal to the value specified in appcModeAdminRecvRuSzUpBnd and greater than or equal to th…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.12
appcModeAdminPrefSendRuSz Specifies the preferred send RU (Request Unit) size of normal- flow requests on the sessions. This value must be less than or equal to the value specified in appcModeAdminSendRuSzUpBnd and greater than or equal to the …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.13
appcModeAdminRecvRuSzUpBnd Specifies the upper bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIND).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.14
appcModeAdminSendRuSzUpBnd Specifies the upper bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIND).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.15
appcModeAdminRecvRuSzLoBnd Specifies the lower bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIND).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.16
appcModeAdminSendRuSzLoBnd Specifies the lower bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIND).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.5.1.17
appcModeAdminSingSessReinit Specifies the responsibility for session reinitiation of a single session with the partner LU (when the session goes down). The local LU uses this parameter to specify the session reinitiation responsibility in session…	Enumeration Enumerated Values: 1 notApplicable 2 operatorControlled 3 primaryOnly 4 secondaryOnly 5 primaryOrSecondary	.1.3.6.1.2.1.34.3.1.2.5.1.18
appcModeAdminCompression Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). prohibited - specifies that no compression is to be used. required…	Enumeration Enumerated Values: 1 prohibited 2 required 3 negotiable	.1.3.6.1.2.1.34.3.1.2.5.1.19
appcModeAdminInBoundCompLevel Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcModeAdminCompression for negotiation during session activation (SNA BIND). …	Enumeration Enumerated Values: 1 none 2 rle 3 lz9 4 lz10 5 lz12	.1.3.6.1.2.1.34.3.1.2.5.1.20
appcModeAdminOutBoundCompLevel Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcModeAdminCompression for negotiation during session activation (SNA BIND). …	Enumeration Enumerated Values: 1 none 2 rle 3 lz9 4 lz10 5 lz12	.1.3.6.1.2.1.34.3.1.2.5.1.21
appcModeAdminCompRleBeforeLZ Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU uses this value for negotiation during session activation (SNA BIND). This parameter is only…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.5.1.22
appcModeAdminSyncLvl Specifies the sync level support. This value is used for negotiation during session activations (SNA BIND). none - No sync level is supported. noneConfirm - None and Con…	Enumeration Enumerated Values: 1 none 2 noneConfirm 3 noneConfirmSyncPoint	.1.3.6.1.2.1.34.3.1.2.5.1.23
appcModeAdminCrypto Specifies whether session-level cryptography is supported. This value is used for negotiation during session activations (SNA BIND). notSupported - Specifies session-level cryptography …	Enumeration Enumerated Values: 1 notSupported 2 mandatory 3 selective	.1.3.6.1.2.1.34.3.1.2.5.1.24

Operational APPC Mode Information.  Two entries are present in
the table when both LUs in a pair are local.

appcModeOperEntry row .1.3.6.1.2.1.34.3.1.2.6.1

Entry of APPC mode operational information table. This entry
does not augment the appcModeAdminEntry, but reflects an actual
operational mode for a given local LU - partner LU pair.

Indexes

appcModeOperLocLuName appcModeOperParLuName appcModeOperModeName

Column	Syntax	OID
appcModeOperLocLuName The SNA name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. If this object has the same valu…	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.6.1.1
appcModeOperParLuName The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. If this object has the same va…	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.2.6.1.2
appcModeOperModeName Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characters).	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.2.6.1.3
appcModeOperCosName Specifies the class of service (COS) name associated with this mode. If the implementation does not support COS names, a zero-length string is returned.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.2.6.1.4
appcModeOperSessEndTpName Specifies the name of the transaction program (TP) to be invoked when a session using this mode is deactivated or ended. If the name is NULL, no transaction program is invoked. When the TP name consists entirely of dis…	OctetString Constraints: range: 1-64	.1.3.6.1.2.1.34.3.1.2.6.1.5
appcModeOperSessLimit Specifies the current session limit of this mode as negotiated through APPC CNOS (Change Number of Sessions) processing. Identifies the total number of sessions that can be established between the local and partner LU u…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.6
appcModeOperMaxSessLimit Specifies the maximum value that the local LU is to use, during CNOS processing, for the session limit. The local LU, as a target LU, will negotiate a higher session limit it receives in the CNOS request down to this m…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.7
appcModeOperMinCwinLimit Specifies the minimum contention winner sessions limit that was negotiated via CNOS processing.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.8
appcModeOperMinClosLimit Specifies the minimum contention loser sessions limit that was negotiated via CNOS processing. This is the same as target minimum contention winner sessions.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.9
appcModeOperConWinAutoActLmt Specifies the limit on the number of contention winner sessions to be automatically activated when the minimum number of contention winner sessions increases (as a result of CNOS processing). The actual number of sessio…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.10
appcModeOperRecvPacWinSz Specifies the size of the receive pacing window. This value is used for negotiation during session activations (SNA BIND). The meaning of this value when set to 0 depends on whether adaptive pacing is sup…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.11
appcModeOperSendPacWinSz Specifies the size of the send pacing window. This value is used for negotiation during session activations (SNA BIND). The meaning of this value when set to 0 depends on whether adaptive pacing is suppor…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.12
appcModeOperPrefRecvRuSz Specifies the preferred receive RU (Request Unit) size of normal-flow requests on the sessions. This value must be less than or equal to the value specified in appcModeOperRecvRuSzUpBnd and greater than or equal to the…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.13
appcModeOperPrefSendRuSz Specifies the preferred send RU (Request Unit) size of normal- flow requests on the sessions. This value must be less than or equal to the value specified in appcModeOperSendRuSzUpBnd and greater than or equal to the v…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.14
appcModeOperRecvRuSzUpBnd Specifies the upper bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIND).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.15
appcModeOperSendRuSzUpBnd Specifies the upper bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIND).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.16
appcModeOperRecvRuSzLoBnd Specifies the lower bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIND).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.17
appcModeOperSendRuSzLoBnd Specifies the lower bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation during session activations (SNA BIND).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.2.6.1.18
appcModeOperSingSessReinit Specifies the responsibility for session reinitiation of a single session with the partner LU (when the session goes down). The local LU uses this parameter to specify the session reinitiation responsibility in session…	Enumeration Enumerated Values: 1 notApplicable 2 operatorControlled 3 primaryOnly 4 secondaryOnly 5 primaryOrSecondary	.1.3.6.1.2.1.34.3.1.2.6.1.19
appcModeOperCompression Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). prohibited - specifies that no compression is to be used. required…	Enumeration Enumerated Values: 1 prohibited 2 required 3 negotiable	.1.3.6.1.2.1.34.3.1.2.6.1.20
appcModeOperInBoundCompLevel Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcModeOperCompression for negotiation during session activation (SNA BIND). n…	Enumeration Enumerated Values: 1 none 2 rle 3 lz9 4 lz10 5 lz12	.1.3.6.1.2.1.34.3.1.2.6.1.21
appcModeOperOutBoundCompLevel Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcModeOperCompression for negotiation during session activation (SNA BIND). …	Enumeration Enumerated Values: 1 none 2 rle 3 lz9 4 lz10 5 lz12	.1.3.6.1.2.1.34.3.1.2.6.1.22
appcModeOperCompRleBeforeLZ Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU uses this value for negotiation during session activation (SNA BIND). This parameter is only…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.6.1.23
appcModeOperSyncLvl Specifies the sync level support for sessions involving this LU pair and mode name. none - No sync level is supported. noneConfirm - None and Confirm level supported…	Enumeration Enumerated Values: 1 none 2 noneConfirm 3 noneConfirmSyncPoint	.1.3.6.1.2.1.34.3.1.2.6.1.24
appcModeOperCrypto Specifies whether session-level cryptography is supported for sessions involving this LU pair and mode name. notSupported - Specifies session-level cryptography is no…	Enumeration Enumerated Values: 1 notSupported 2 mandatory 3 selective	.1.3.6.1.2.1.34.3.1.2.6.1.25
appcModeOperSyncLvlLastStart Specifies the sync level support. This value represents the initial value proposed by the local LU the last time this capability was negotiated, i.e., when the first session was bound between the local LU and its partn…	Enumeration Enumerated Values: 1 none 2 noneConfirm 3 noneConfirmSyncPoint	.1.3.6.1.2.1.34.3.1.2.6.1.26
appcModeOperCryptoLastStart Specifies whether session-level cryptography is supported. This value represents the initial value proposed by the local LU the last time this capability was negotiated, i.e., when the first session was bound between th…	Enumeration Enumerated Values: 1 notSupported 2 mandatory 3 selective	.1.3.6.1.2.1.34.3.1.2.6.1.27
appcModeOperCNOSNeg Specifies whether CNOS negotiation is in process. CNOS negotiation is used to set or change the various session limits for a mode.	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.6.1.28
appcModeOperActCwin Specifies the number of active contention winner sessions.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.2.6.1.29
appcModeOperActClos Specifies the number of active contention loser sessions.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.2.6.1.30
appcModeOperPndCwin Specifies the number of contention winner sessions that are pending activation.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.2.6.1.31
appcModeOperPndClos Specifies the number of contention loser sessions that are pending activation.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.2.6.1.32
appcModeOperPtmCwin Specifies the number of contention winner sessions that are pending termination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.2.6.1.33
appcModeOperPtmClos Specifies the number of contention loser sessions that are pending termination.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.2.6.1.34
appcModeOperDrainSelf Specifies whether the local LU is draining its conversations for this mode. When a mode session limit is reset (via a CNOS RESET_SESSION_LIMIT request), the local LU could be set to process all queued conversations bef…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.6.1.35
appcModeOperDrainPart Specifies whether the partner LU is draining its conversations for this mode. When a mode session limit is reset (via a CNOS RESET_SESSION_LIMIT request), the partner LU could be set to process all queued conversations…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.2.6.1.36

APPC Local TP Table

appcTpAdminEntry row .1.3.6.1.2.1.34.3.1.3.1.1

Entry of APPC Local TP Information Table.

Indexes

appcTpAdminLocLuName appcTpAdminTpName

Column	Syntax	OID
appcTpAdminLocLuName The SNA name of the local LU to which this TP definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.3.1.1.1
appcTpAdminTpName The local transaction program name. This name is sent on an ATTACH remote allocation request. When the TP name consists entirely of displayable EBCDIC code points, it is mapped directly to the equivalent …	OctetString Constraints: range: 1-64	.1.3.6.1.2.1.34.3.1.3.1.1.2
appcTpAdminFileSpec The local file specification of the transaction program. May be a zero-length string if not applicable.	OctetString Constraints: range: 0-80	.1.3.6.1.2.1.34.3.1.3.1.1.3
appcTpAdminStartParm A parameter string passed to the transaction program when it is started. May be a zero-length string if not supported.	OctetString Constraints: range: 0-128	.1.3.6.1.2.1.34.3.1.3.1.1.4
appcTpAdminTpOperation Specifies how the program will be started. other - Specifies that the program operation is none of the methods specified. It may be a product-specific method. queuedOperatorStarted - Speci…	Enumeration Enumerated Values: 1 other 2 queuedOperatorStarted 3 queuedOperatorPreloaded 4 queuedAmStarted 5 nonqueuedAmStarted	.1.3.6.1.2.1.34.3.1.3.1.1.5
appcTpAdminInAttachTimeout This object specifies the number of seconds incoming attaches will be queued waiting for an APPC program to issue a RECEIVE_ALLOCATE verb or for a CPI-C program to issue an Accept_Conversation (CMACCP) call. This param…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.3.1.1.6
appcTpAdminRcvAllocTimeout This object specifies the number of seconds an APPC program's RECEIVE_ALLOCATE verb or a CPI-C program's Accept_Conversation (CMACCP) call will wait for an incoming attach to arrive. A value of zero indic…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.3.1.1.7
appcTpAdminSyncLvl Indicates the synchronization level or levels that the transaction program supports. The levels are defined as follows: none - allocation requests indicating a synchronization …	Enumeration Enumerated Values: 1 none 2 confirm 3 noneAndConfirm 4 syncpoint 5 noneAndSyncpoint 6 confirmAndSyncpoint 7 all	.1.3.6.1.2.1.34.3.1.3.1.1.8
appcTpAdminInstLmt The maximum number of concurrent instances of this transaction program that will be supported for a local LU. A value of zero indicates that there is no limit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.3.1.1.9
appcTpAdminStatus Indicates the status of the TP relative to starting execution when the local LU receives an allocation (ATTACH) request naming this program. enabled - the local LU can start the program. …	Enumeration Enumerated Values: 1 enabled 2 tempDisabled 3 permDisabled	.1.3.6.1.2.1.34.3.1.3.1.1.10
appcTpAdminLongRun Indicates whether this is a long-running transaction program (i.e., one that stays around even after the conversation goes away).	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.3.1.1.11
appcTpAdminConvType Specifies the conversation type (basic or mapped) that will be used by the TP. This value is verified upon receipt of an incoming attach. The acceptable values are: basic - Indicates that…	Enumeration Enumerated Values: 1 basic 2 mapped 3 basicOrMapped	.1.3.6.1.2.1.34.3.1.3.1.1.12
appcTpAdminConvDuplex Specifies the conversation duplex type (half or full) that will be used by the TP. This value is verified upon receipt of an incoming attach. The acceptable values are: half - Indicates tha…	Enumeration Enumerated Values: 1 half 2 full 3 halfOrFull	.1.3.6.1.2.1.34.3.1.3.1.1.13
appcTpAdminConvSecReq Indicates whether conversation-level security information is required on incoming attaches designating this TP name. Conversation-level security verification is always performed on those requests that include security i…	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.3.1.1.14
appcTpAdminVerPip Specifies whether the number of PIP (Program Initialization Parameters) subfields should be verified against the number expected (appcTpAdminPipSubNum).	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.3.1.1.15
appcTpAdminPipSubNum Specifies the number of PIP subfields expected by the TP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.3.1.1.16

Table of active APPC sessions.  Two entries are present in the
table when both session partners are local.

appcActSessEntry row .1.3.6.1.2.1.34.3.1.4.1.1

Entry of APPC Session Information Table. Indexed by LU pair
and integer-valued session index.

Indexes

appcActSessLocLuName appcActSessParLuName appcActSessIndex

Column	Syntax	OID
appcActSessLocLuName Specifies the name of the local LU for the session. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.4.1.1.1
appcActSessParLuName Specifies the name of the partner LU for the session. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. If this …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.4.1.1.2
appcActSessIndex This value identifies the index of the session, which is unique for this LU pair. It is recommended that an Agent not reuse the index of a deactivated session for a significant period of time (e.g., one week).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.4.1.1.3
appcActSessPcidCpName The network-qualified CP name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving the…	OctetString Constraints: range: 0-0 range: 3-17	.1.3.6.1.2.1.34.3.1.4.1.1.4
appcActSessPcid The procedure correlation identifier (PCID) of a session. It is an 8-octet value assigned by the control point providing session services for the primary LU. A null string indicates that the value is unknown.	OctetString Constraints: range: 8-8 range: 0-0	.1.3.6.1.2.1.34.3.1.4.1.1.5
appcActSessPluIndicator Indicates which LU is the PLU for this session. For independent LUs, the PLU (primary LU) is the one that initiated the session (sent BIND), while the SLU (secondary LU) is the one that accepted the session initiation …	Enumeration Enumerated Values: 1 localLuIsPlu 2 partnerLuIsPlu	.1.3.6.1.2.1.34.3.1.4.1.1.6
appcActSessModeName The mode name used for this session.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.4.1.1.7
appcActSessCosName The Class of Service (COS) name used for this session. A null string indicates that the value is unknown.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.4.1.1.8
appcActSessTransPriority The transmission priority of this session. 1 = unknown priority 2 = low priority 3 = medium priority 4 = high priority 5 = network priority	Enumeration Enumerated Values: 1 unknown 2 low 3 medium 4 high 5 network	.1.3.6.1.2.1.34.3.1.4.1.1.9
appcActSessEnhanceSecSup Enhanced security supported. Indicates the level of enhanced security support: 1 = none 2 = level 1 3 = level 2	Enumeration Enumerated Values: 1 none 2 level1 3 level2	.1.3.6.1.2.1.34.3.1.4.1.1.10
appcActSessSendPacingType The type of pacing being used for sending data.	Enumeration Enumerated Values: 1 none 2 fixed 3 adaptive	.1.3.6.1.2.1.34.3.1.4.1.1.11
appcActSessSendRpc The send residual pace count. This represents the number of MUs that can still be sent in the current session window.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.1.1.12
appcActSessSendNxWndwSize The size of the next window which will be used to send data.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.1.1.13
appcActSessRecvPacingType The type of pacing being used for receiving data.	Enumeration Enumerated Values: 1 none 2 fixed 3 adaptive	.1.3.6.1.2.1.34.3.1.4.1.1.14
appcActSessRecvRpc The receive residual pace count. This represents the number of MUs that can still be received in the current session window.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.1.1.15
appcActSessRecvNxWndwSize The size of the next window which will be used to receive data.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.1.1.16
appcActSessRscv The route selection control vector (RSCV CV2B) used for this session. It is present for APPN-level implementations. LEN-level implementations will return a null string. The internal format of this vector is described …	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.34.3.1.4.1.1.17
appcActSessInUse Specifies whether the session is currently in use (i.e., in bracket with a conversation).	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.2.1.34.3.1.4.1.1.18
appcActSessMaxSndRuSize The maximum RU size used on this session for sending RUs.	Integer32 Constraints: range: 1-8192	.1.3.6.1.2.1.34.3.1.4.1.1.19
appcActSessMaxRcvRuSize The maximum RU size used on this session for receiving RUs.	Integer32 Constraints: range: 1-8192	.1.3.6.1.2.1.34.3.1.4.1.1.20
appcActSessSndPacingSize The size of the send pacing window on this session.	Integer32 Constraints: range: 1-63	.1.3.6.1.2.1.34.3.1.4.1.1.21
appcActSessRcvPacingSize The size of the receive pacing window on this session.	Integer32 Constraints: range: 1-63	.1.3.6.1.2.1.34.3.1.4.1.1.22
appcActSessOperState The value indicates the current operational state of the session. 'unbound (1)' - session has been unbound; in this state it will be removed from the session table by …	Enumerationr/w Enumerated Values: 1 unbound 2 pendingBind 3 bound 4 pendingUnbind	.1.3.6.1.2.1.34.3.1.4.1.1.23
appcActSessUpTime The length of time the session has been active, measured in hundredths of a second.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.1.1.24
appcActSessRtpNceId The local HPR Network Connection Endpoint of the session.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.4.1.1.25
appcActSessRtpTcid The local RTP connection TCID of the session.	OctetString Constraints: range: 8-8 range: 0-0	.1.3.6.1.2.1.34.3.1.4.1.1.26
appcActSessLinkIndex This value identifies the link over which the session passes. This value points to the row in the table containing information on the link instance. (e.g., the sdlcLSAdminTable of the SNA DLC MIB module). This object …	SNMPv2-TCInstancePointer Description: A pointer to either a specific instance of a MIB object or a conceptual row of a MIB table in the managed device. In the latter case, by convention, it is the name of the particular instance of the first accessible col…	.1.3.6.1.2.1.34.3.1.4.1.1.27

This table contains dynamic statistical information relating
to active APPC sessions.  The entries in this table cannot be
created by a Management Station.  Two entries are present in
the table when both session partners are local.  This table is
populated only when the value of appcCntrlOperStat is
'active'.

appcSessStatsEntry row .1.3.6.1.2.1.34.3.1.4.2.1

Contains statistics information for an APPC session. Each
entry is created by the Agent. Objects in this table have
read-only access. Each session from appcActSessTable has one
entry in this table.

Indexes

appcSessStatsLocLuName appcSessStatsParLuName appcSessStatsSessIndex

Column	Syntax	OID
appcSessStatsLocLuName Specifies the name of the local LU for the session. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. If this ob…	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.4.2.1.1
appcSessStatsParLuName Specifies the name of the partner LU for the session. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. If this …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.4.2.1.2
appcSessStatsSessIndex This value identifies the index of the session, which is unique for this LU pair. It is recommended that an Agent not reuse the index of a deactivated session for a significant period of time (e.g., one week). …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.4.2.1.3
appcSessStatsSentFmdBytes The number of function management data (FMD) bytes sent by the local LU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.4
appcSessStatsSentNonFmdBytes The number of non-function management data (non-FMD) bytes sent by the local LU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.5
appcSessStatsRcvdFmdBytes The number of function management data (FMD) bytes received by the local LU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.6
appcSessStatsRcvdNonFmdBytes The number of non-function management data (non-FMD) bytes received by the local LU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.7
appcSessStatsSentFmdRus The number of function management data (FMD) RUs sent by the local LU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.8
appcSessStatsSentNonFmdRus The number of non-function management data (non-FMD) RUs sent by the local LU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.9
appcSessStatsRcvdFmdRus The number of function management data (FMD) RUs received by the local LU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.10
appcSessStatsRcvdNonFmdRus The number of non-function management data (non-FMD) RUs received by the local LU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.11
appcSessStatsCtrUpTime The length of time the counters for this session have been active, measured in hundredths of a second.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.2.1.12

Table of historical information about APPC sessions that
terminated abnormally.  Two entries may be present in the table
when both session partners are local.  It is an implementation
choice how long to retain information about a given session.

appcHistSessEntry row .1.3.6.1.2.1.34.3.1.4.3.1

Entry of APPC Session History Table. This table is indexed by
an integer which is continuously incremented until it
eventually wraps.

Indexes

appcHistSessIndex

Column	Syntax	OID
appcHistSessIndex Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.2.1.34.3.1.4.3.1.1
appcHistSessTime The time at which the session was either terminated or failed to be established.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.34.3.1.4.3.1.2
appcHistSessType Indicates the type of event that caused the entry to be made: recvNegBindRsp - Received a negative bind response from the partner LU. sendNegBindRsp - Sent a negative bind response to …	Enumeration Enumerated Values: 1 recvNegBindRsp 2 sendNegBindRsp 3 sessActRejected 4 unbindSent 5 unbindReceived	.1.3.6.1.2.1.34.3.1.4.3.1.3
appcHistSessLocLuName The network-qualified local LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.4.3.1.4
appcHistSessParLuName The network-qualified partner LU name. This field is from 3 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 3-17	.1.3.6.1.2.1.34.3.1.4.3.1.5
appcHistSessModeName The mode name of the session.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.4.3.1.6
appcHistSessUnbindType The type of unbind which terminated the session. This value is consists of one (1) octet; and its meaning is defined in SNA Formats.	OctetString Constraints: range: 1-1	.1.3.6.1.2.1.34.3.1.4.3.1.7
appcHistSessSenseData The sense data associated with the termination of the session, taken from the negative BIND response or UNBIND request.	SnaSenseData Type Constraints: range: 8	.1.3.6.1.2.1.34.3.1.4.3.1.8
appcHistSessComponentId The implementation-specific name of the component which detected the problem.	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.34.3.1.4.3.1.9
appcHistSessDetectModule The implementation-specific name of the module which detected the problem.	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.34.3.1.4.3.1.10

A table indicating how many APPC sessions terminating in this
node are transported by each RTP connection.

appcSessRtpEntry row .1.3.6.1.2.1.34.3.1.4.4.1

Entry of APPC session RTP table.

Indexes

appcSessRtpNceId appcSessRtpTcid

Column	Syntax	OID
appcSessRtpNceId The local Network Connection Endpoint of the RTP connection.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.4.4.1.1
appcSessRtpTcid The local TCID of the RTP connection.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.3.1.4.4.1.2
appcSessRtpSessions The number of APPC sessions terminating in this node that are using this RTP connection.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.4.4.1.3

Table of information about active APPC Conversations.  In this
context 'active' means that a conversation is currently
associated with a particular session.  Two entries are present
in the table when both LUs for the session are local.

appcActiveConvEntry row .1.3.6.1.2.1.34.3.1.5.1.1

Entry representing one active APPC Conversation.

Indexes

appcActiveConvLocLuName appcActiveConvParLuName appcActiveConvSessIndex

Column	Syntax	OID
appcActiveConvLocLuName The SNA name of the local LU for the conversation. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. If this obj…	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.5.1.1.1
appcActiveConvParLuName The SNA name of the partner LU for the conversation. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present. If this o…	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.5.1.1.2
appcActiveConvSessIndex Index of entry in appcActSessTable that is associated with this conversation. If this object has the same value as appcActSessIndex for the same LU pair, then the two entries being indexed apply to the same resource (s…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.5.1.1.3
appcActiveConvId The 4-byte ID of the conversation.	OctetString Constraints: range: 4-4	.1.3.6.1.2.1.34.3.1.5.1.1.4
appcActiveConvState Indicates the state of the conversation at the instant when the information was retrieved. The values are: reset The conversation is reset (i.e., deallocated). send Th…	Enumeration Enumerated Values: 1 reset 2 send 3 receive 4 confirm 5 confirmSend 6 confirmDealloc 7 pendingDeallocate 8 pendingPost 9 sendReceive 10 sendOnly 11 receiveOnly 12 deferReceive 13 deferDeallocate 14 syncpoint 15 syncpointSend 16 syncpointDeallocate 17 backoutRequired	.1.3.6.1.2.1.34.3.1.5.1.1.5
appcActiveConvType Indicates the type of conversation. The values are: basic Indicates that this conversation supports basic verbs. mapped Indicates that this conversation suppo…	Enumeration Enumerated Values: 1 basic 2 mapped	.1.3.6.1.2.1.34.3.1.5.1.1.6
appcActiveConvCorrelator This is an 8-byte identifier that the source LU assigns to the conversation; the source LU is the one that sent the allocation request. The conversation correlator is included on the allocation request. The conversati…	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.5.1.1.7
appcActiveConvSyncLvl Indicates the highest sync level support for the conversation. The values are: none Indicates that no sync-level processing can be performed on this conversation. The …	Enumeration Enumerated Values: 1 none 2 confirm 3 syncpt	.1.3.6.1.2.1.34.3.1.5.1.1.8
appcActiveConvSource Indicates whether the local or partner LU is the source of the conversation, that is, which LU started the conversation by sending the allocation request. localLu The local LU is the so…	Enumeration Enumerated Values: 1 localLu 2 partnerLu	.1.3.6.1.2.1.34.3.1.5.1.1.9
appcActiveConvDuplex Indicates the conversation duplex style in effect for the conversation. half Indicates that information can be transferred in both directions, but only in one direction at a …	Enumeration Enumerated Values: 1 half 2 full	.1.3.6.1.2.1.34.3.1.5.1.1.10
appcActiveConvUpTime The length of time since the conversation started, measured in hundredths of a second.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.5.1.1.11
appcActiveConvSendBytes Indicates the number of bytes that was sent on the conversation. The count includes all SNA RU bytes sent, including those in the FMH-5 (Attach), FMH-7 (Error Description), SIGNAL, LUSTAT, and SNA responses; it does no…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.5.1.1.12
appcActiveConvRcvBytes Indicates the number of bytes that was received on the conversation. The count includes all SNA RU bytes sent, including those in the FMH-5 (Attach), FMH-7 (Error Description), SIGNAL, LUSTAT, and SNA responses; it doe…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.3.1.5.1.1.13
appcActiveConvUserid The user ID that the initiating program provided in the incoming attach.	OctetString Constraints: range: 0-10	.1.3.6.1.2.1.34.3.1.5.1.1.14
appcActiveConvPcidNauName The network-qualified NAU name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving th…	OctetString Constraints: range: 3-17 range: 0-0	.1.3.6.1.2.1.34.3.1.5.1.1.15
appcActiveConvPcid The procedure correlation identifier (PCID) of the session. It is an 8-octet value assigned by the control point providing session services for the primary LU. A null string indicates that the value is unknown.	OctetString Constraints: range: 8-8 range: 0-0	.1.3.6.1.2.1.34.3.1.5.1.1.16
appcActiveConvModeName The Mode Name used for this conversation. This is a 1-8 character name.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.5.1.1.17
appcActiveConvLuwIdName The SNA name of the LU that initiated the logical unit of work that is associated with this active TP. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the LU name i…	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.5.1.1.18
appcActiveConvLuwIdInstance The instance identifier for the logical unit of work.	OctetString Constraints: range: 0-6	.1.3.6.1.2.1.34.3.1.5.1.1.19
appcActiveConvLuwIdSequence The sequence identifier for the logical unit of work.	OctetString Constraints: range: 0-2	.1.3.6.1.2.1.34.3.1.5.1.1.20
appcActiveConvTpName The transaction program name which started this conversation. This name could either be from a FMH5 ATTACH for a remotely started conversation, otherwise it could the name of the local TP if available. Wh…	OctetString Constraints: range: 0-64	.1.3.6.1.2.1.34.3.1.5.1.1.21

Table of historical information about APPC Conversations that
          
ended in error.  Possible categories of error conditions that
could be saved in this table are:
          
      - allocation errors,
      - deallocate abend,
      - program errors, and
      - service errors.

appcHistConvEntry row .1.3.6.1.2.1.34.3.1.5.2.1

Entry representing one APPC Conversation.

Indexes

appcHistConvIndex

Column	Syntax	OID
appcHistConvIndex Index for entry in Conversation table. This value identifies the unique index of the conversation. It is recommended that an Agent not reuse the index of a deactivated conversation for a significant period of time (e.…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.34.3.1.5.2.1.1
appcHistConvEndTime The time at which the conversation ended.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.34.3.1.5.2.1.2
appcHistConvLocLuName The name of the local LU for this conversation. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.5.2.1.3
appcHistConvParLuName The SNA name of the partner LU for the conversation. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.5.2.1.4
appcHistConvTpName The transaction program name which started this conversation. This name could either be from a FMH5 ATTACH for a remotely started conversation, otherwise it could the name of the local TP if available. Wh…	OctetString Constraints: range: 0-64	.1.3.6.1.2.1.34.3.1.5.2.1.5
appcHistConvPcidNauName The network-qualified NAU name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN serving th…	OctetString Constraints: range: 3-17 range: 0-0	.1.3.6.1.2.1.34.3.1.5.2.1.6
appcHistConvPcid The procedure correlation identifier (PCID) of the session. It is an 8-octet value assigned by the control point providing session services for the primary LU. A null string indicates that the value is unknown.	OctetString Constraints: range: 8-8 range: 0-0	.1.3.6.1.2.1.34.3.1.5.2.1.7
appcHistConvSenseData The sense data associated with the action that ended this conversation, e.g., FMH-7 or UNBIND.	SnaSenseData Type Constraints: range: 8	.1.3.6.1.2.1.34.3.1.5.2.1.8
appcHistConvLogData The first 32 bytes of the data portion of the Log Data GDS Variable that is associated with the last FMH-7 that occurred on this conversation. If there was no Log Data GDS Variable associated with the FMH-7, this objec…	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.34.3.1.5.2.1.9
appcHistConvEndedBy Indicates which LU ended the conversation.	Enumeration Enumerated Values: 1 localLu 2 partnerLu	.1.3.6.1.2.1.34.3.1.5.2.1.10

APPC CPI-C side information table.

appcCpicAdminEntry row .1.3.6.1.2.1.34.3.1.6.1.1

Entry of APPC CPI-C side information Table.

Indexes

appcCpicAdminLocLuName appcCpicAdminSymbDestName

Column	Syntax	OID
appcCpicAdminLocLuName The SNA name of the local LU to which this CPI-C side information definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.6.1.1.1
appcCpicAdminSymbDestName Specifies the symbolic destination name used by CPI-C applications to identify this definition.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.6.1.1.2
appcCpicAdminParLuAlias A local alias for the partner LU. If not known or not applicable, this object contains a zero-length string.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.6.1.1.3
appcCpicAdminParLuName The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.6.1.1.4
appcCpicAdminModeName Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characters).	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.6.1.1.5
appcCpicAdminTpNameType Specifies whether the TP name in appcCpicAdminTpName identifies a normal TP or an SNA service TP. In this context, a normal TP is one with a name consisting only of displayable characters, while an SNA service TP has a…	Enumeration Enumerated Values: 1 normal 2 snaServiceTp	.1.3.6.1.2.1.34.3.1.6.1.1.6
appcCpicAdminTpName Specifies the name of the partner TP to be used when a CPI-C application initiates a conversation specifying this side information entry. Display convention When the TP name consists ent…	OctetString Constraints: range: 1-64	.1.3.6.1.2.1.34.3.1.6.1.1.7
appcCpicAdminUserid The security userid, if any, associated with the side information definition.	OctetString Constraints: range: 0-10	.1.3.6.1.2.1.34.3.1.6.1.1.8
appcCpicAdminSecurity Specifies the security information to be used for allocating the conversation. none - No security information. same - Use the security environment currently associated wi…	Enumeration Enumerated Values: 1 none 2 same 3 pgm 4 pgmStrong 5 distributed 6 mutual	.1.3.6.1.2.1.34.3.1.6.1.1.9

APPC CPI-C side information operational table.

appcCpicOperEntry row .1.3.6.1.2.1.34.3.1.6.2.1

Entry of APPC CPI-C side information Table.

Indexes

appcCpicOperLocLuName appcCpicOperSymbDestName

Column	Syntax	OID
appcCpicOperLocLuName The SNA name of the local LU to which this CPI-C side information definition applies. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is …	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.6.2.1.1
appcCpicOperSymbDestName Specifies the symbolic destination name used by CPI-C applications to identify this definition.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.6.2.1.2
appcCpicOperParLuAlias A local alias for the partner LU. If not known or not applicable, this object contains a zero-length string.	OctetString Constraints: range: 0-8	.1.3.6.1.2.1.34.3.1.6.2.1.3
appcCpicOperParLuName The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId from the NAU name if the NetId is present.	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.3.1.6.2.1.4
appcCpicOperModeName Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characters).	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.3.1.6.2.1.5
appcCpicOperTpNameType Specifies whether the TP name in appcCpicOperTpName identifies a normal TP or an SNA service TP. In this context, a normal TP is one with a name consisting only of displayable characters, while an SNA service TP has a …	Enumeration Enumerated Values: 1 normal 2 snaServiceTp	.1.3.6.1.2.1.34.3.1.6.2.1.6
appcCpicOperTpName Specifies the name of the partner TP to be used when a CPI-C application initiates a conversation specifying this side information entry. Display convention When the TP name consists en…	OctetString Constraints: range: 1-64	.1.3.6.1.2.1.34.3.1.6.2.1.7
appcCpicOperUserid The security userid, if any, associated with the active side information definition.	OctetString Constraints: range: 0-10	.1.3.6.1.2.1.34.3.1.6.2.1.8
appcCpicOperSecurity Specifies the security information to be used for allocating the conversation. none - No security information. same - Use the security environment currently associated wi…	Enumeration Enumerated Values: 1 none 2 same 3 pgm 4 pgmStrong 5 distributed 6 mutual	.1.3.6.1.2.1.34.3.1.6.2.1.9