ALCATEL-ENT1-TIMETRA-SERV-MIB Table View

A table that contains customer information. There
is an entry in this table corresponding to the
default customer. This entry cannot be edited or
deleted, and it is used as the default customer
for newly created services.

custInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.3.1

Information about a specific customer.

Indexes

custId

Column	Syntax	OID
custId Customer identifier. This ID must be unique within a service domain.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.1
custRowStatus The value of the object custRowStatus specifies the status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.2
custDescription The value of the object custDescription specifies optional, generic information about this customer in a displayable format.	ServObjDescr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.3
custContact The value of the object custContact specifies the name of the primary contact person for this customer.	ServObjDescr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.4
custPhone The value of the object custPhone specifies the phone/pager number used to reach the primary contact person.	ServObjDescr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.5
custLastMgmtChange The value of the object custLastMgmtChange indicates the value of the object sysUpTime at the time of the most recent management-initiated change to this customer.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.1.3.1.6

A table that contains ingress QoS scheduler
statistics for the customer multi service site.

custMultiSvcSiteIngStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.5.1

Ingress statistics about a specific customer
multi service site ingress scheduler.

Indexes

custId custMultSvcSiteName custIngQosSchedName

Column	Syntax	OID
custIngQosSchedName The index of the ingress QoS scheduler of this customer multi service site.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.1.5.1.1
custIngQosSchedStatsForwardedPackets The value of the object custIngQosSchedStatsForwardedPackets indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.5.1.2
custIngQosSchedStatsForwardedOctets The value of the object custIngQosSchedStatsForwardedOctets indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.5.1.3

A table that contains egress QoS scheduler
statistics for the customer multi service site.

custMultiSvcSiteEgrStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.6.1

Egress statistics about a specific customer
multi service site egress scheduler.

Indexes

custId custMultSvcSiteName custEgrQosSchedName

Column	Syntax	OID
custEgrQosSchedName The index of the egress QoS scheduler of this customer multi service site.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.1.6.1.1
custEgrQosSchedStatsForwardedPackets The value of the object custEgrQosSchedStatsForwardedPackets indicates number of forwarded packets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.6.1.2
custEgrQosSchedStatsForwardedOctets The value of the object custEgrQosSchedStatsForwardedOctets indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.6.1.3

The custIngQosPortIdSchedStatsTable contains ingress QoS scheduler
statistics for the customer multi service site.

custIngQosPortIdSchedStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.7.1

Each entry represents the ingress statistics about a specific customer
multi service site ingress scheduler. Entries are created when
a scheduler policy is applied to an MSS.

Indexes

custId custMultSvcSiteName custIngQosPortIdSchedName custIngQosAssignmentPortId

Column	Syntax	OID
custIngQosPortIdSchedName The value of custIngQosPortIdSchedName is used as an index of the ingress QoS scheduler of this customer multi service site.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.1.7.1.1
custIngQosAssignmentPortId The value of custIngQosAssignmentPortId is used as an index of the ingress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/la…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.4.1.7.1.2
custIngQosPortSchedFwdPkts The value of custIngQosPortSchedFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.7.1.3
custIngQosPortSchedFwdOctets The value of custIngQosPortSchedFwdOctets indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.7.1.4

The custEgrQosPortIdSchedStatsTable contains egress QoS scheduler
statistics for the customer multi service site.

custEgrQosPortIdSchedStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.8.1

Each row entry represents the egress statistics for a customer
multi-service-site egress scheduler. Entries are created when
a scheduler policy is applied to an MSS.

Indexes

custId custMultSvcSiteName custEgrQosPortIdSchedName custEgrQosAssignmentPortId

Column	Syntax	OID
custEgrQosPortIdSchedName The value of custEgrQosPortIdSchedName is used as an index of the egress QoS scheduler of this customer multi service site.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.1.8.1.1
custEgrQosAssignmentPortId The value of custEgrQosAssignmentPortId is used as an index of the egress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.4.1.8.1.2
custEgrQosPortSchedFwdPkts The value of custEgrQosPortSchedFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.8.1.3
custEgrQosPortSchedFwdOctets The value of custEgrQosPortSchedFwdOctets indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.8.1.4

A table that contains ingress QoS scheduler
statistics for the customer multi service site.

custMssIngQosSchedInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.9.1

Ingress statistics about a specific customer
multi service site ingress scheduler.

Indexes

custId custMultSvcSiteName custMssIngQosSName

Column	Syntax	OID
custMssIngQosSName The value of custMssIngQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.1
custMssIngQosSRowStatus The value of custMssIngQosSRowStatus controls the creation and deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.2
custMssIngQosSLastMgmtChange The value of custMssIngQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.3
custMssIngQosSOverrideFlags The value of custMssIngQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribu…	TVirtSchedAttributer/w Type Values: 0 cir 1 pir 2 summedCir	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.4
custMssIngQosSPIR The value of custMssIngQosSPIR specifies the desired PIR value for this virtual scheduler.	kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w Type Constraints: range: -1 range: 1..100000000	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.5
custMssIngQosSCIR The value of custMssIngQosSCIR specifies the desired CIR value for this virtual scheduler.	kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w Type Constraints: range: -1..100000000	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.6
custMssIngQosSSummedCIR The value of custMssIngQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (custMssIngQosSCIR) loses its meanin…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.1.9.1.7

A table that contains egress QoS scheduler
statistics for the customer multi service site.

custMssEgrQosSchedInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.10.1

Egrress statistics about a specific customer
multi service site egress scheduler.

Indexes

custId custMultSvcSiteName custMssEgrQosSName

Column	Syntax	OID
custMssEgrQosSName The value of custMssEgrQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.1
custMssEgrQosSRowStatus The value of custMssEgrQosSRowStatus controls the creation and deletion of rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.2
custMssEgrQosSLastMgmtChange The value of custMssEgrQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.3
custMssEgrQosSOverrideFlags The value of custMssEgrQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribu…	TVirtSchedAttributer/w Type Values: 0 cir 1 pir 2 summedCir	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.4
custMssEgrQosSPIR The value of custMssEgrQosSPIR specifies the desired PIR value for this virtual scheduler.	kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w Type Constraints: range: -1 range: 1..100000000	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.5
custMssEgrQosSCIR The value of custMssEgrQosSCIR specifies the desired CIR value for this virtual scheduler.	kilo bits per secondALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w Type Constraints: range: -1..100000000	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.6
custMssEgrQosSSummedCIR The value of custMssEgrQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (custMssEgrQosSCIR) loses its meanin…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.1.10.1.7

A table that contains ingress QoS scheduler
statistics for the customer multi service site, organized
by scheduler policy.

custMultiSvcSiteIngSchedPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.11.1

Ingress statistics about a specific customer
multi service site egress scheduler. Entries are created
when a scheduler policy of a MSS is replaced with another
one due to Time-Of-Day policies.

Indexes

custId custMultSvcSiteName ALCATEL-ENT1-TIMETRA-QOS-MIBtSchedulerPolicyName ALCATEL-ENT1-TIMETRA-QOS-MIBtVirtualSchedulerName

Column	Syntax	OID
custIngSchedPlcyStatsFwdPkt The value of the object custIngSchedPlcyStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.11.1.1
custIngSchedPlcyStatsFwdOct The value of the object custIngSchedPlcyStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.11.1.2

A table that contains egress QoS scheduler
statistics for the customer multi service site, organized
by scheduler policy.

custMultiSvcSiteEgrSchedPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.12.1

Egress statistics about a specific customer
multi service site egress scheduler. Entries are created
when a scheduler policy of a MSS is replaced with another
one due to Time-Of-Day policies.

Indexes

custId custMultSvcSiteName ALCATEL-ENT1-TIMETRA-QOS-MIBtSchedulerPolicyName ALCATEL-ENT1-TIMETRA-QOS-MIBtVirtualSchedulerName

Column	Syntax	OID
custEgrSchedPlcyStatsFwdPkt The value of the object custEgrSchedPlcyStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.12.1.1
custEgrSchedPlcyStatsFwdOct The value of the object custEgrSchedPlcyStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.12.1.2

The custMultiSvcSiteIngSchedPlcyPortStatsTable contains 
ingress QoS scheduler statistics for the customer multi service site,
organized by scheduler policy.

custMultiSvcSiteIngSchedPlcyPortStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.13.1

Each entry represents the ingress statistics about a specific customer
multi service site ingress scheduler. Entries are created when
a scheduler policy of a MSS is replaced with another one due
to Time-Of-Day policies.

Indexes

custId custMultSvcSiteName ALCATEL-ENT1-TIMETRA-QOS-MIBtSchedulerPolicyName ALCATEL-ENT1-TIMETRA-QOS-MIBtVirtualSchedulerName custIngSchedPlcyPortStatsPort

Column	Syntax	OID
custIngSchedPlcyPortStatsPort The value of custIngSchedPlcyPortStatsPort is used as an index of the ingress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/cc…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.4.1.13.1.1
custIngSchedPlcyPortStatsFwdPkt The value of custIngSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.13.1.2
custIngSchedPlcyPortStatsFwdOct The value of custIngSchedPlcyPortStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.13.1.3

The custMultiSvcSiteEgrSchedPlcyPortStatsTable contains 
egress QoS scheduler statistics for the customer multi service site,
organized by scheduler policy.

custMultiSvcSiteEgrSchedPlcyPortStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.1.14.1

Each entry represents the egress statistics about a specific customer
multi service site egress scheduler. Entries are created when
a scheduler policy of a MSS is replaced with another one due
to Time-Of-Day policies.

Indexes

custId custMultSvcSiteName ALCATEL-ENT1-TIMETRA-QOS-MIBtSchedulerPolicyName ALCATEL-ENT1-TIMETRA-QOS-MIBtVirtualSchedulerName custEgrSchedPlcyPortStatsPort

Column	Syntax	OID
custEgrSchedPlcyPortStatsPort The value of custEgrSchedPlcyPortStatsPort is used as an index of the egress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/cca…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.4.1.14.1.1
custEgrSchedPlcyPortStatsFwdPkt The value of custEgrSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.14.1.2
custEgrSchedPlcyPortStatsFwdOct The value of custEgrSchedPlcyPortStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.1.14.1.3

A table that contains basic service information.

svcBaseInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.2.1

Basic information about a specific service.

Indexes

svcId

Column	Syntax	OID
svcId The value of the object svcId specifies the Service identifier. This value should be unique within the service domain.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.1
svcRowStatus This value of the object svcRowStatus specifies the status of this row. To delete an entry from this table, the corresponding service must be administratively down, have no SAP's defined on it, and have …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.2
svcType The value of the object svcType specifies the service type: e.g. epipe, tls, etc. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.	ServTyper/w Type Values: 0 unknown 1 epipe 2 p3pipe 3 tls 4 vprn 5 ies 6 mirror 7 apipe 8 fpipe 9 ipipe 10 cpipe	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.3
svcCustId The value of the object svcCustId specifies the ID of the customer who owns this service. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustIdr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.4
svcIpRouting The value of the object svcIpRouting specifies, for a 'tls' service, whether IP routing is enabled. For 'epipe', 'p3pipe', 'apipe', 'fpipe', 'ipipe' and 'cpipe' services, this object cannot be set and has the value 'dis…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.5
svcDescription The value of the object svcDescription specifiers an optional, generic information about this service.	ServObjDescr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.6
svcMtu The value of the object svcMtu specifies the largest frame size (in octets) that this service can handle. The default value of this object depends on the service type: 1514 octets for epipe, p3pipe and tls, 1508 for api…	Integer32r/w Constraints: range: 0-9194	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.7
svcAdminStatus The value of the object svcAdminStatus specifies the desired state of this service.	ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.8
svcOperStatus The value of the object svcOperStatus indicates the operating state of this service. The requirements for a service to be operationally up depend on the service type: epipe, p3pipe, apipe, fpipe, ipipe an…	ALCATEL-ENT1-TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.9
svcNumSaps The value of the object svcNumSaps indicates the number of SAPs defined on this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.10
svcNumSdps The value of the object svcNumSdps indicates the number of SDPs bound to this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.11
svcLastMgmtChange The value of of the object svcLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this service.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.12
svcDefMeshVcId The value of the object svcDefMeshVcId specifies, only in services that accept mesh SDP bindings, the VC ID portion of the sdpBindId index of each mesh SDP binding defined in the service. The default value of this objec…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.13
svcVpnId The value of the object svcVpnId specifies the VPN ID assigned to this service. The value of this object can be specified only when the row is created. If the value is not specified, it defaults to the service ID.	VpnIdr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.14
svcVRouterId The value of the object svcVRouterId specifies, for a IES or VPRN service the associated virtual router instance where its interfaces are defined. This object has a special significance for the VPRN servi…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxVRtrIDOrZeror/w Type Constraints: range: 0..4096	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.15
svcAutoBind The value of the object svcAutoBind specifies, for a VPRN service, the type of lookup to be used by the routing instance if no SDP to the destination exists.	Enumerationr/w Enumerated Values: 1 none 2 gre 3 ldp	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.16
svcLastStatusChange The value of the object svcLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to his service.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.17
svcVllType The value of the object svcVllType specifies, for a apipe, fpipe or cpipe service, the type of pseudo-wire to be signalled for the service. The default for this object depends on the service type: 'atmSdu' for apipes, …	Enumerationr/w Enumerated Values: 1 undef 6 atmSdu 7 atmCell 8 atmVcc 9 atmVpc 10 frDlci 12 satopE1 13 satopT1 14 satopE3 15 satopT3 16 cesopsn 17 cesopsnCas	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.18
svcMgmtVpls The value of the object svcMgmtVpls specifies, only if svcType = 'tls' whether or not the service is a management vpls. If set to false the service is acting as a regular VPLS service. If set to true, the service is ac…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.19
svcRadiusDiscovery The value of the object svcRadiusDiscovery specifies whether RADIUS auto-discovery is enabled on this service.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.20
svcRadiusUserNameType The value of the object svcRadiusUserNameType specifies whether RADIUS user name is vpn-id or router-distinguisher. By default, the value of this object is 'none'. svcRadiusUserNameType and svcRadiusU…	Enumerationr/w Enumerated Values: 0 none 1 vpn-id 2 router-distinguisher	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.21
svcRadiusUserName The value of the object svcRadiusUserName specifies the RADIUS user name. svcRadiusUserNameType specifies the type of the username and has to be set along with svcRadiusUserName when svcRadiusUserName can either be …	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.22
svcVcSwitching The value of the object svcVcSwitching specifies if the PW switching signalling is used for the Spokes configured under the service. This object can only be specified when the row is created.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.23
svcRadiusPEDiscPolicy The value of the object svcRadiusPEDiscPolicy specifies the RADIUS PE Discovery Policy name.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.24
svcRadiusDiscoveryShutdown The value of svcRadiusDiscoveryShutdown specifies the desired administrative state for the RADIUS auto-discovery server. When the server is 'down' the operational state of the server is disabled. By d…	ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.25
svcVplsType Backbone VPLS ('bVpls') refers to the B-Component instance of the Provider Backbone Bridging (PBB/IEEE 802.1ah) feature. It represents the Multi-point tunneling component that multiplexes multiple Customer VPNs (ISIDs) …	Enumerationr/w Enumerated Values: 1 none 2 bVpls 3 iVpls	.1.3.6.1.4.1.6527.3.1.2.4.2.2.1.26

A table that contains TLS service information.

svcTlsInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.3.1

TLS specific information about a service.

Indexes

svcId

Column	Syntax	OID
svcTlsMacLearning The value of the object svcTlsMacLearning specifies whether the MAC learning process is enabled in this TLS.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.1
svcTlsDiscardUnknownDest The value of the object svcTlsDiscardUnknownDest specifies whether frames received with an unknown destination MAC are discarded in this TLS.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.2
svcTlsFdbTableSize The value of the object svcTlsFdbTableSize specifies the maximum number of learned and static entries allowed in the FDB of this service. When the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c…	Integer32r/w Constraints: range: 1-196607	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.3
svcTlsFdbNumEntries The value of the object svcTlsFdbNumEntries indicates the current number of entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.4
svcTlsFdbNumStaticEntries The value of the object svcTlsFdbNumStaticEntries indicates the current number of static entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.5
svcTlsFdbLocalAgeTime The value of the object svcTlsFdbLocalAgeTime specifies the number of seconds used to age out TLS FDB entries learned on local SAPs.	Integer32r/w Constraints: range: 60-86400	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.6
svcTlsFdbRemoteAgeTime The value of the object svcTlsFdbRemoteAgeTime specifies the number of seconds used to age out TLS FDB entries learned on an SDP. These entries correspond to MAC addresses learned on remote SAPs.	Integer32r/w Constraints: range: 60-86400	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.7
svcTlsStpAdminStatus The value of the object svcTlsStpAdminStatus specifies the administrative state of the Spanning Tree Protocol instance associated with this service.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.8
svcTlsStpPriority The value of the object svcTlsStpPriority specifies the priority of the Spanning Tree Protocol instance associated with this service. It is used as the highest 4 bits of the Bridge ID included in the Configuration BPDU…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.9
svcTlsStpBridgeAddress The value of the object svcTlsStpBridgeAddress indicates the MAC address used to identify this bridge in the network. It is used as the last six octets of the Bridge ID included in the Configuration BPDU's generated by…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.10
svcTlsStpTimeSinceTopologyChange The value of the object svcTlsStpTimeSinceTopologyChange indicates the time (in hundredths of a second) since the last time a topology change was detected by the Spanning Tree Protocol instance associated with this serv…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.11
svcTlsStpTopologyChanges The value of the object svcTlsStpTopologyChanges indicates the total number of topology changes detected by the Spanning Tree Protocol instance associated with this service since the management entity was last reset or …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.12
svcTlsStpDesignatedRoot The value of the object svcTlsStpDesignatedRoot indicates the bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is used as t…	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.13
svcTlsStpRootCost The value of the object svcTlsStpRootCost indicates the cost of the path to the root bridge as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.14
svcTlsStpRootPort The value of the object svcTlsStpRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.15
svcTlsStpMaxAge The value of the object svcTlsStpMaxAge indicates the maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded. This is the actual value that this bridge is currently…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.16
svcTlsStpHelloTime The value of the object svcTlsStpHelloTime indicates the amount of time between the transmission of Configuration BPDUs. This is the actual value that this bridge is currently using.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.17
svcTlsStpHoldTimeobsolete The value of the object svcTlsStpHoldTime indicates the interval length during which no more than two Configuration BPDUs shall be transmitted by this bridge. This object is no longer used. It is replaced by the object …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.18
svcTlsStpForwardDelay The value of the object svcTlsStpForwardDelay indicates how fast a port changes its state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning stat…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.19
svcTlsStpBridgeMaxAge The value of the object svcTlsStpBridgeMaxAge specifies the value that all bridges should use for 'MaxAge' when this bridge is acting as the root bridge.	Integer32r/w Constraints: range: 6-40	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.20
svcTlsStpBridgeHelloTime The value of the object svcTlsStpBridgeHelloTime specifies the value that all bridges should use for 'HelloTime' when this bridge is acting as the root bridge.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.21
svcTlsStpBridgeForwardDelay The value of the object svcTlsStpBridgeForwardDelay specifies the value that all bridges should use for 'ForwardDelay' when this bridge is acting as the root bridge.	Integer32r/w Constraints: range: 4-30	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.22
svcTlsStpOperStatus The value of the object svcTlsStpOperStatus indicates the operating status of the Spanning Tree Protocol instance associated with this service.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.30
svcTlsStpVirtualRootBridgeStatus The value of the object svcTlsStpVirtualRootBridgeStatus indicates the operating status of the Virtual Root Bridge of the Spanning Tree Protocol instance associated with this service. The status of the Virtual Root Br…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.31
svcTlsMacAgeing The value of the object svcTlsMacAgeing specifies whether the MAC aging process is enabled in this TLS.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.32
svcTlsStpTopologyChangeActive The value of the object svcTlsStpTopologyChangeActive indicates, when set to 'true', that a topology change is currently in progress.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.33
svcTlsFdbTableFullHighWatermark The value of the object svcTlsFdbTableFullHighWatermark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be raised by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.34
svcTlsFdbTableFullLowWatermark The value of the object svcTlsFdbTableFullLowWatermark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be raised by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.35
svcTlsVpnId The value of the object svcTlsVpnId indicates the VPN ID of the associated TLS service.	VpnId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.36
svcTlsCustId The vakue of the object svcTlsCustId indicates the Customer ID of the associated TLS service.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.37
svcTlsStpVersion The value of the object svcTlsStpVersion specifies the version of Spanning Tree Protocol the bridge is currently running. The value 'rstp' corresponds to the Rapid Spanning Tree Protocol specified in IEE…	Enumerationr/w Enumerated Values: 2 rstp 3 compDot1w 4 dot1w 5 mstp 6 pmstp	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.38
svcTlsStpHoldCount The value of the object svcTlsStpHoldCount specifies the maximum number of BPDUs that are transmitted in any 'HelloTime' interval. The value used by the bridge to limit the maximum transmission rate of BPDUs.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.39
svcTlsStpPrimaryBridge The value of the object svcTlsStpPrimaryBridge indicates the BridgeId of the bridge that acts as the primary bridge, being the gateway from the core mesh towards the root bridge.	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.40
svcTlsStpBridgeInstanceId The value of the object svcTlsStpBridgeInstanceId indicates a 12 bit value chosen by the the system. It is part of the STP bridge Id, which consists of 8 octets: - 4 highest bits of octet 1: the bridge priority (ref…	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.41
svcTlsStpVcpOperProtocol The value of the object svcTlsStpVcpOperProtocol indicates whether stp, rstp or mstp is running on this VCP. If the protocol is not enabled on this VCP, the value notApplicable is returned.	StpProtocol Type Values: 0 notApplicable 1 stp 2 rstp 3 mstp	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.42
svcTlsMacMoveMaxRate The value of the object svcTlsMacMoveMaxRate specifies the maximum rate at which MAC's can be re-learned in this TLS service, before the SAP where the moving MAC was last seen is automatically disabled in order to prote…	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.43
svcTlsMacMoveRetryTimeout The value of the object svcTlsMacMoveRetryTimeout specifies the time in seconds to wait before a SAP that has been disabled after exceeding the maximum re-learn rate is re-enabled. A value of zero indica…	Unsigned32r/w Constraints: range: 0-600	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.44
svcTlsMacMoveAdminStatus The value of the object svcTlsMacMoveAdminStatus specifies the administrative state of the MAC movement feature associated with this service.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.45
svcTlsMacRelearnOnly The value of the object svcTlsMacRelearnOnly indicates when set to 'true' that either the FDB table of this TLS service is full, or that the maximum system-wide number of MAC's supported by the agent has been reached, a…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.46
svcTlsMfibTableSize The value of the object svcTlsMfibTableSize specifies the maximum number of entries allowed in the MFIB table of this service. If the value is 0, then there is no limit.	Integer32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.47
svcTlsMfibTableFullHighWatermark The value of the object svcTlsMfibTableFullHighWatermark specifies the utilization of the MFIB table of this TLS service at which a table full alarm will be raised by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.48
svcTlsMfibTableFullLowWatermark The value of the object svcTlsMfibTableFullLowWatermark specifies utilization of the MFIB table of this TLS service at which a table full alarm will be cleared by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.49
svcTlsMacFlushOnFail The value of the object svcTlsMacFlushOnFail specifies whether a special mac-flush is sent when a port or sap becomes operational down.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.50
svcTlsStpRegionName The value of the object svcTlsStpRegionName specifies the MSTP region name. Together with region revision and VLAN-to-instance assignment it defines the MSTP region.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.51
svcTlsStpRegionRevision The value of the object svcTlsStpRegionRevision specifies the MSTP region revision number. Together with region name and VLAN-to-instance assignment it defines the MSTP region.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.52
svcTlsStpBridgeMaxHops The value of the object svcTlsStpBridgeMaxHops specifies the maximum number of hops (known as 'MaxHops' in 802.1Q).	Integer32r/w Constraints: range: 1-40	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.53
svcTlsStpCistRegionalRoot The value of the object svcTlsStpCistRegionalRoot indicates the bridge identifier of the regional root of the CIST spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This va…	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.54
svcTlsStpCistIntRootCost The value of the object svcTlsStpCistIntRootCost indicates the cost of the path to the CIST regional root bridge as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.55
svcTlsStpCistRemainingHopCount The value of the object svcTlsStpCistRemainingHopCount specifies the remaining number of hops.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.56
svcTlsStpCistRegionalRootPort The value of the object svcTlsStpCistRegionalRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the regional root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.57
svcTlsFdbNumLearnedEntries The value of the object svcTlsFdbNumLearnedEntries indicates the current number of learned entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.58
svcTlsFdbNumOamEntries The value of the object svcTlsFdbNumOamEntries indicates the current number of OAM entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.59
svcTlsFdbNumDhcpEntries The value of the object svcTlsFdbNumDhcpEntries indicates the current number of dhcp-learned entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.60
svcTlsFdbNumHostEntries The value of the object svcTlsFdbNumHostEntries indicates the current number of host-learned entries in the FDB of this service.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.61
svcTlsShcvAction The value of the object svcTlsShcvAction indicates whether any action should be triggered when the connectivity check fails.	Enumerationr/w Enumerated Values: 1 alarm 2 remove	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.62
svcTlsShcvSrcIp The value of the object svcTlsShcvSrcIp specifies the source IP address used when doing the connectivity check. The value 0.0.0.0 indicates that no host IP address is specified.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.63
svcTlsShcvSrcMac The value of the object svcTlsShcvSrcMac specifies the MAC address used when doing the connectivity check. The value 0:0:0:0:0:0 indicates that no host MAC address is specified.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.64
svcTlsShcvInterval The value of the object svcTlsShcvInterval specifies the interval in minutes between connectivity checks. Zero means no connectivity checking.	minutesUnsigned32r/w Constraints: range: 0-6000	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.65
svcTlsPriPortsCumulativeFactor The value of the object svcTlsPriPortsCumulativeFactor specifies a factor for the primary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate must …	Unsigned32r/w Constraints: range: 3-10	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66
svcTlsSecPortsCumulativeFactor The value of the object svcTlsSecPortsCumulativeFactor specifies a factor for the secondary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate mus…	Unsigned32r/w Constraints: range: 2-9	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.67
svcTlsL2ptTermEnabled The value of the object svcTlsL2ptTermEnabled indicates if L2PT-termination and/or Bpdu-translation is in use in this service by at least one SAP or spoke SDP Bind. If the value is 'true', it means that at least one …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.68
svcTlsPropagateMacFlush The value of svcTlsPropagateMacFlush specifies whether 'MAC flush' messages received from the given LDP are propagated to all spoke-SDPs and mesh-SDPs within the context of this VPLS service. The propagation will follow…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.69
svcTlsMrpAdminStatus The value of the object svcTlsMrpAdminStatus specifies whether the Multiple Registration Protocol (MRP) is enabled in this TLS.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.70
svcTlsMrpMaxAttributes The value of the object svcTlsMrpMaxAttributes indicates maximum number of MRP attributes supported in this TLS. In most cases the default value is 2048 MRP attributes. For some platform and chassis types…	Unsigned32r/w Constraints: range: 1-2048	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.71
svcTlsMrpAttributeCount The value of the object svcTlsMrpAttributeCount indicates number of MRP attributes currently registered in this TLS.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.72
svcTlsMrpFailedRegisterCount The value of the object svcTlsMrpFailedRegisterCount indicates number of failed MRP attribute registrations in this TLS.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.73
svcTlsMcPathMgmtPlcyName The value of svcTlsMcPathMgmtPlcyName specifies the multicast policy name configured on this service.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.74
svcTlsMrpFloodTime The value of the object svcTlsMrpFloodTime specifies the amount of time in seconds after a status change in the TLS during which traffic is flooded. Once that time expires, traffic will be delivered according to the MR…	secondsUnsigned32r/w Constraints: range: 3-600 range: 0-0	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.75
svcTlsMrpAttrTblHighWatermark The value of the object svcTlsMrpAttrTblHighWatermark specifies the utilization of the MRP attribute table of this TLS service at which a table full alarm will be raised by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.76
svcTlsMrpAttrTblLowWatermark The value of the object svcTlsMrpAttrTblLowWatermark specifies utilization of the MRP attribute table of this TLS service at which a table full alarm will be cleared by the agent.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.6527.3.1.2.4.2.3.1.77

A table that contains TLS FDB information.

tlsFdbInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.4.1

Information about a specific TLS FDB.

Indexes

svcId tlsFdbMacAddr

Column	Syntax	OID
tlsFdbMacAddr The value of the object tlsFdbMacAddr specifies the 48-bit IEEE 802.3 MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.1
tlsFdbRowStatus The value of the object tlsFdbRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.2
tlsFdbType The value of the object tlsFdbType specifies: - 'static': Static TLS FDB entries created via management - 'learned': dynamic entries created via the learning process - 'oam': entries created via the OA…	Enumerationr/w Enumerated Values: 1 static 2 learned 3 oam 4 dhcp 5 host	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.3
tlsFdbLocale The value of the object tlsFdbLocale specifies for TLS FDB entries defined on a local SAP the value 'sap', remote entries defined on an SDP have the value 'sdp', entries associated with the Control Processor have the va…	Enumerationr/w Enumerated Values: 1 sap 2 sdp 3 cpm 4 endpoint	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.4
tlsFdbPortId When the value of tlsFdbLocale is 'sap', this object, along with tlsFdbEncapValue, specifies the SAP associated with the MAC address defined by tlsFdbMacAddr. This object is otherwise insignificant and should contain a …	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.5
tlsFdbEncapValue The value of the object tlsFdbEncapValue specifies, when the value of tlsFdbLocale is 'sap', along with tlsFdbPortId, SAP associated with the MAC address defined by tlsFdbMacAddr. This object is otherwise insignificant …	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.6
tlsFdbSdpId The value of the object tlsFdbSdpId specifies, when the value of tlsFdbLocale is 'sdp', along with tlsFdbVcId,the SDP Binding associated with the MAC address defined by tlsFdbMacAddr. This object is other- wise insignif…	SdpIdr/w Type Constraints: range: 0..17407	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.7
tlsFdbVcId The value of the object tlsFdbVcId specifies, when the value of tlsFdbLocale is 'sdp', along with tlsFdbSdpId, the SDP Binding associated with the MAC address defined by tlsFdbMacAddr. This object is other-wise insignif…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.8
tlsFdbVpnId The value of the object tlsFdbVpnId indicates the VPN ID of the associated TLS.	VpnId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.9
tlsFdbCustId The value of the object tlsFdbCustId indicates the Customer ID of the associated TLS.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.10
tlsFdbLastStateChange The value of the object tlsFdbLastStateChange indicates the value of sysUpTime at the time of the most recent state change of this entry. A state change is defined as a change in the value of: tlsFdbRowStatus, tlsFdbTyp…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.11
tlsFdbProtected The value of the object tlsFdbProtected indicates whether or not this MAC is protected. When the value of this object is 'true' the agent will protect the MAC from being learned or re-learned on a SAP that has restricte…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.12
tlsFdbBackboneDstMac The value of the object tlsFdbBackboneDstMac indicates the Backbone VPLS service MAC address used as destination MAC address in the Provider Backbone Bridging frames for this tlsFdbMacAddr. This object i…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.13
tlsFdbNumIVplsMac The value of the object tlsFdbNumIVplsMac indicates the number of ISID VPLS service MAC addressess which are using this Backbone MAC address defined by tlsFdbMacAddr. This object is insignificant for serv…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.14
tlsFdbEndPointName The value of tlsFdbEndPointName specifies the name of the service endpoint associated with the MAC Address.	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.15
tlsFdbEPMacOperSdpId The value of the object tlsFdbEPMacOperSdpId along with tlsFdbEPMacOperVcId indicates the SDP binding associated with this static MAC address for this endpoint. This object is valid when tlsFdbLocale is '…	SdpId Type Constraints: range: 0..17407	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.16
tlsFdbEPMacOperVcId The value of the object tlsFdbEPMacOperVcId along with tlsFdbEPMacOperSdpId indicates the SDP binding associated with this static MAC address for this endpoint. This object is valid when tlsFdbLocale is '…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.17
tlsFdbPbbNumEpipes The value of the object tlsFdbPbbNumEpipes indicates number of E-Pipes that resolve to this MAC Address. This object is valid for service with svcVplsType set to 'bVpls', otherwise it should contain a val…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.4.1.18

A table that contains IES interface information.

iesIfEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.5.1

Information about a specific IES interface.

Indexes

svcId iesIfIndex

Column	Syntax	OID
iesIfIndex The secondary index of the row in the vRtrIfTable corresponding to this IES interface. The primary index is 1; i.e. all IES interfaces are defined in the Base virtual router context.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.1
iesIfRowStatus The value of the object iesIfRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.2
iesIfName The value of the object iesIfName specifies the name used to refer to this IES interface. This name must be unique within the Base virtual router context. This object must be specified when the row is created, and cann…	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.3
iesIfDescription The value of the object iesIfDescription specifies generic information about this IES interface.	ServObjLongDescr/w Type Constraints: range: 0..160	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.4
iesIfAdminStatus The value of the object iesIfAdminStatus specifies the desired state of this IES interface.	ALCATEL-ENT1-TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.5
iesIfOperStatus The value of the object iesIfOperStatus indicates the operating state of this IES interface.	ALCATEL-ENT1-TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.6
iesIfLastMgmtChange The value of the object iesIfLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this IES interface.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.7
iesIfVpnId The value of the object iesIfVpnId indicates the VPN ID of the associated IES service.	VpnId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.8
iesIfCustId The value of the object iesIfCustId indicates the Customer ID of the associated IES service.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.9
iesIfLoopback When the value of iesIfLoopback is set to 'true', loopback is enabled on the IES interface represented by this row entry. When the value is 'false', loopback is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.10
iesIfLastStatusChange The value of the object iesIfLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to his interface.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.11
iesIfType The value of iesIfType specifies the type of this IES interface. This object can only be set at row creation time. 'service' - This is a normal IES interface. 'subscriber' - This is a subscriber interface, …	Enumerationr/w Enumerated Values: 1 service 2 subscriber 3 group 4 redundant 5 cem 6 ipsec 7 ipMirror	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.12
iesIfParentIf The value of iesIfParentIf specifies the ifIndex of this interface's parent. This value can only be set at row creation time, and is only valid when iesIfType is 'group'. The interface pointed to by iesIfParentIf must b…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.13
iesIfShcvSource The value of iesIfShcvSource specifies the source used for subscriber host connectivity checking	Enumerationr/w Enumerated Values: 1 interface 2 vrrp	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.14
iesIfShcvAction The value of iesIfShcvAction specifies the action to be taken for hosts on this interface whose host connectivity checking fails	Enumerationr/w Enumerated Values: 1 alarm 2 remove	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.15
iesIfShcvInterval The value of the object iesIfShcvInterval specifies the interval in minutes between connectivity checks. Zero means no in host-connection-verify	minutesUnsigned32r/w Constraints: range: 0-6000	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.16
iesIfFwdServId The value of iesIfFwdServId specifies the forwarding service ID for a subscriber interface in a retailer context. This value can only be set at row creation time along with iesIfFwdSubIf, and it is only valid when ie…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServIdr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.17
iesIfFwdSubIf The value of iesIfFwdSubIf specifies the forwarding subscriber interface for a subscriber interface in a retailer context. This value can only be set at row creation time along with iesIfFwdServId, and it is only va…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.4.2.5.1.18

A table that contains TLS service split-horizon group
information. A maximum of 30 split-horizon groups can
be created in a given TLS service. Maximum is set to 15
for a TLS service with svcVplsType set to 'bVpls', or 
'iVpls'.

tlsShgInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.6.1

Split-horizon group information about a TLS service.

Indexes

svcId tlsShgName

Column	Syntax	OID
tlsShgName The value of the object tlsShgName specifies the name of the split-horizon group. The name must be unique within a TLS, however the same name can appear in different TLS services, in which case they denote different spl…	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.1
tlsShgRowStatus The value of the object tlsShgRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, there should be no TLS SAP…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.2
tlsShgCustId The value of the object tlsShgCustId indicates the Customer ID of the associated TLS service.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.3
tlsShgInstanceId The value of the object tlsShgInstanceId indicates the instance identifier for the split horizon group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.4
tlsShgDescription The value of the object tlsShgDescription specifies generic information about this split-horizon group.	ServObjDescr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.5
tlsShgLastMgmtChange The value of the object tlsShgLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this split-horizon group.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.6
tlsShgResidential The value of the object tlsShgResidential specifies whether or not the split-horizon-group is residential.In a Residential Split Horizon Group (RSHG) there is no downstream broadcast, and all saps in the group will sh…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.7
tlsShgRestProtSrcMac The value of the object tlsShgRestProtSrcMac indicates how the agent will handle relearn requests for protected MAC addresses received on SAP's belonging to this SHG. When the value of this object is 'true' requests to …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.8
tlsShgRestUnprotDstMac The value of the object tlsShgRestUnprotDstMac indicates how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.9
tlsShgRestProtSrcMacAction The value of the object tlsShgRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP belonging to this SHG. When the value of this object is 'dis…	Enumerationr/w Enumerated Values: 1 disable 2 alarm-only	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.10
tlsShgCreationOrigin The value of tlsShgCreationOrigin indicates the protocol or mechanism which created this SHG.	L2RouteOrigin Type Values: 1 manual 2 bgp-l2vpn 3 radius	.1.3.6.1.4.1.6527.3.1.2.4.2.6.1.11

A table that contains APIPE service information.

svcApipeInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.7.1

APIPE specific information about a service.

Indexes

svcId

Column	Syntax	OID
svcApipeInterworking The value of the object svcApipeInterworking specifies the interworking function that should be applied for packets that ingress/egress SAPs that are part of a APIPE service.	Enumerationr/w Enumerated Values: 1 none 2 frf-5 3 frf-8-2-translate	.1.3.6.1.4.1.6527.3.1.2.4.2.7.1.1

tlsMFibInfoTable contains the IPv4 Multicast FIB for
this Tls.
          
This table was made obsolete in the 6.0 release.
It is replaced by tlsMFibTable.

tlsMFibInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.8.1

An entry in the tlsMFibInfoTable. Each entry indicates
whether traffic from a certain source to a certain
multicast destination (group) needs to be forwarded or
blocked on the indicated SAP/SDP.

Indexes

svcId tlsMFibInfoGrpAddr tlsMFibInfoSrcAddr tlsMFibInfoLocale tlsMFibInfoPortId tlsMFibInfoEncapValue tlsMFibInfoSdpId tlsMFibInfoVcId

Column	Syntax	OID
tlsMFibInfoGrpAddrobsolete The value of the object tlsMFibInfoGrpAddr indicates the IPv4 multicast destination address for which this table entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.1
tlsMFibInfoSrcAddrobsolete tlsMFibInfoSrcAddr indicates the IPv4 unicast source address for which this table entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.2
tlsMFibInfoLocaleobsolete tlsMFibInfoLocale indicates if the information in this entry pertains to a 'sap' or to an 'sdp'.	MfibLocation Type Values: 1 sap 2 sdp	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.3
tlsMFibInfoPortIdobsolete When the value of tlsMFibInfoLocale is 'sap', the object tlsMFibInfoPortId along with the object tlsMFibInfoEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.4
tlsMFibInfoEncapValueobsolete When the value of tlsMFibInfoLocale is 'sap', the object tlsMFibInfoEncapValue, along with the object tlsMFibInfoPortId, indicates the SAP for which this entry contains information. This object is otherwise insignifican…	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapVal	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.5
tlsMFibInfoSdpIdobsolete When the value of tlsMFibInfoLocale is 'sdp', the object tlsMFibInfoSdpId, along with tlsMFibInfoVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and cont…	SdpId Type Constraints: range: 0..17407	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.6
tlsMFibInfoVcIdobsolete When the value of tlsMFibInfoLocale is 'sdp', the object tlsMFibInfoVcId, along with tlsMFibInfoSdpId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and cont…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.7
tlsMFibInfoFwdOrBlkobsolete tlsMFibInfoFwdOrBlk indicates if traffic for the indicated (S,G) pair will be blocked or forwarded on the indicated SAP or SDP.	MfibGrpSrcFwdOrBlk Type Values: 1 forward 2 block	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.8
tlsMFibInfoSvcIdobsolete tlsMFibInfoSvcId indicates the TLS service to which the indicated SAP or SDP belongs.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.8.1.9

tlsMFibGrpSrcStatsTable contains statistics for the
entries in the IPv4 Multicast FIB for this Tls. These
statistics are collected by the forwarding engine.
          
This table was made obsolete in the 6.0 release.
It is replaced by tlsMFibStatsTable.

tlsMFibGrpSrcStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.9.1

An entry in the tlsMFibGrpSrcStatsTable.

Indexes

svcId tlsMFibGrpSrcStatsGrpAddr tlsMFibGrpSrcStatsSrcAddr

Column	Syntax	OID
tlsMFibGrpSrcStatsGrpAddrobsolete tlsMFibGrpSrcStatsGrpAddr indicates the IPv4 multicast destination address for which this table entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.4.2.9.1.1
tlsMFibGrpSrcStatsSrcAddrobsolete tlsMFibGrpSrcStatsSrcAddr indicates the IPv4 unicast source address for which this table entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.4.2.9.1.2
tlsMFibGrpSrcStatsForwardedPktsobsolete tlsMFibGrpSrcStatsForwardedPkts indicates the number of IPv4 multicast packets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.2.9.1.3
tlsMFibGrpSrcStatsForwardedOctetsobsolete tlsMFibGrpSrcStatsForwardedOctets indicates the number of octets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.2.9.1.4

A table that contains TLS service Redundant Group
information.  There is no limit on the number of
Redundant Groups that can be created globally or
within a service.

tlsRdntGrpEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.10.1

Redundant Group information

Indexes

svcId tlsRdntGrpName

Column	Syntax	OID
tlsRdntGrpName The value of the object tlsRdntGrpName specifies the name of the redundant group. The name must be unique within a TLS, however the same name can appear in different TLS services, in which case they denote different red…	ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.2.10.1.1
tlsRdntGrpRowStatus The value of the object tlsRdntGrpRowStatus specifies the status of this row. The only values supported are 'active', 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.10.1.2
tlsRdntGrpDescription The value of the object tlsRdntGrpDescription specifies generic information about this redundant group.	ServObjDescr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.4.2.10.1.3
tlsRdntGrpLastMgmtChange The value of the object tlsRdntGrpLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this redundant group.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.10.1.4

A table that holds information about the members of
TLS redundant groups.

tlsRdntGrpMemberEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.11.1

Redundant Group Member information.

Indexes

tlsRdntGrpName tlsRdntGrpMemberRemoteNodeAddrTp tlsRdntGrpMemberRemoteNodeAddr tlsRdntGrpMemberIsSap tlsRdntGrpMemberPort tlsRdntGrpMemberEncap

Column	Syntax	OID
tlsRdntGrpMemberRemoteNodeAddrTp The value of the object tlsRdntGrpMemberRemoteNodeAddrTp specifies the addresstype of the remote ldp peer.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.2.11.1.1
tlsRdntGrpMemberRemoteNodeAddr The value of the object tlsRdntGrpMemberRemoteNodeAddr specifies the ip address of the remote ldp peer.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.4.2.11.1.2
tlsRdntGrpMemberIsSap The value of the object tlsRdntGrpMemberIsSap specifies whether the Port ID and Encap describe a sap or a port (in which case Encap has no meaning).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.11.1.3
tlsRdntGrpMemberPort When the value of tlsRdntGrpMemberIsSap is 'sap', the value of the object tlsRdntGrpMemberPort, along with tlsRdntGrpMemberEncap, specifies a SAP, otherwise a port (in which case tlsRdntGrpMemberEncap is insignificant).	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.4.2.11.1.4
tlsRdntGrpMemberEncap When the value of tlsRdntGrpMemberIsSap is 'sap', the value of the object tlsRdntGrpMemberEncap, along with tlsRdntGrpMemberPort, specifies a SAP. This object is otherwise insignificant and should contain a value of 0.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapVal	.1.3.6.1.4.1.6527.3.1.2.4.2.11.1.5
tlsRdntGrpMemberRowStatus The value of the object tlsRdntGrpMemberRowStatus specifies the status of this row. The only values supported are 'active', 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.11.1.6
tlsRdntGrpMemberLastMgmtChange The value of the object tlsRdntGrpMemberLastMgmtChange indicates the time of the most recent management-initiated change to this redundant group member.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.11.1.7

A table that contains Multiple Spanning Tree Instance
(MSTI) information. Each management VPLS running MSTP can
have upto 15 MSTI, not including the CIST.

tlsMstiEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.12.1

Information about a specific MSTI.

Indexes

svcId tlsMstiInstanceId

Column	Syntax	OID
tlsMstiInstanceId The value of the object tlsMstiInstanceId specifies the Multiple Spanning Tree Instance.	MstiInstanceId Type Constraints: range: 1..4094	.1.3.6.1.4.1.6527.3.1.2.4.2.12.1.1
tlsMstiRowStatus The value of the object tlsMstiRowStatus specifies the status of this row. The only values supported during a set operation are 'active', 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.12.1.2
tlsMstiPriority The value of the object tlsMstiPriority specifies the priority of this spcecific Multiple Spanning Tree Instance for this service. It is used as the highest 4 bits of the Bridge ID included in the MSTP BPDU's generated …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.4.2.12.1.3
tlsMstiLastMgmtChange The value of the object tlsMstiLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this MSTI.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.12.1.4
tlsMstiRegionalRoot The value of the object tlsMstiRegionalRoot indicates the bridge identifier of the regional root of the MSTI spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is…	BridgeId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.12.1.5
tlsMstiIntRootCost The value of the object tlsMstiIntRootCost indicates the cost of the path to the regional root bridge as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.12.1.6
tlsMstiRemainingHopCount The value of the object tlsMstiRemainingHopCount specifies the remaining number of hops.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.12.1.7
tlsMstiRegionalRootPort The value of the object tlsMstiRegionalRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the regional root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.12.1.8

This table is used only for a management VPLS when MSTP
is running. It indicates for each multiple spanning tree
instance the ranges of associated VLANs that will be
affected when a certain SAP changes state.

tlsMstiManagedVlanListEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.13.1

Each row specifies a range of VLANS associated
with a SAP of a MVPLS. Ranges may contains overlapping
sections only for Mvpls SAPs that belong to the same
service.

Indexes

svcId tlsMstiInstanceId tlsMstiMvplsMinVlanTag tlsMstiMvplsMaxVlanTag

Column	Syntax	OID
tlsMstiMvplsMinVlanTag The value of tlsMstiMvplsMinVlanTag specifies the left bound (i.e. min. value) of a range of VLANs that are associated with the Mvpls SAP. tlsMstiMvplsMinVlanTag must be smaller than (or equal to) tlsMstiMvplsMaxVlanTag.	ALCATEL-ENT1-TIMETRA-TC-MIBQTag Type Constraints: range: 1..4094	.1.3.6.1.4.1.6527.3.1.2.4.2.13.1.1
tlsMstiMvplsMaxVlanTag The value of tlsMstiMvplsMaxVlanTag specifies the right bound (i.e. max. value) of a range of VLANs that are associated with the Mvpls SAP.	ALCATEL-ENT1-TIMETRA-TC-MIBQTag Type Constraints: range: 1..4094	.1.3.6.1.4.1.6527.3.1.2.4.2.13.1.2
tlsMstiMvplsRowStatus The value of tlsMstiMvplsRowStatus specifies the status of this row. The only values supported during a set operation are 'active', 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.13.1.3