AC-PSTN-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
12
Rows
12
Columns
64
acTrunkTable
table.1.3.6.1.4.1.5003.9.10.9.1.1.1.1
·
1 row entry
·
11 columns
Indexes
acTrunkIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
acTrunkIndex
Trunk ID at board in which the call is taking place.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-83 |
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkAdministrativeState
Trunk Administrative State.
Access: Online. AC INI-Param: N/A |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkProtocolType
Used to set the PSTN protocol to be used for this trunk. Relevant
only when TDMBusType=acFRAMERS (2). Either: NONE = 0 E1_EURO_ISDN = 1 T1_CAS = 2 T1_RAW_CAS = 3 T1_TRANSPARENT = 4 E1_TRANSPARENT_31 = 5 E1_TRANSP… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkClockMaster
Used to select the trunk clock source.
0 = acCLOCK_MASTER_OFF (clock recovered from the line) 1 = acCLOCK_MASTER_ON (the trunk clock source is provided by the internal/TDM bus clock source depending on t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkFramingMethod
Selects the Framing method to be used for this trunk.
Access: Online. AC INI-Param: N/A |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkLineCode
Use to select line code. B8ZS or AMI for T1 spans and HDB3 or
AMI for E1 spans. 0 = Use B8ZS line code (for T1 trunks only = default) 1 = Use AMI line code (for T1 or E1 trunks) 2 = Use HDB3 line code (fo… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkTraceLevel
Defines the Trace level:
acNO_TRACE = 0 acFULL_ISDN_TRACE = 1 acLAYER3_ISDN_TRACE = 2 acONLY_ISDN_Q931_MSGS_TRACE = 3 acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4 acFULL_ISDN_TRACE_WITH_DUPLICATION = 5 acISDN_Q931_RAW_DATA_TR… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkDialPlanName
Sets the Dial Plan name that will be used on the specific trunk.
Range = string 11 characters. Access: Instant. AC INI-Param: CasTrunkDialPlanName |
OctetStringr/w Constraints: range: 0-11 |
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkLineType
Line type.
lineTypeBRI(12) - If the physical type is BRI. lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are other lines that are already configured to either E1 or T1. lineTypeUnknown(-1) - For non BRI IF wh… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkAutoClockPriority
Defines the trunk priority for auto-clock fallback (Priority
range: 0 - 100 (0 - 99 are priority settings, in which 0 = highest Priority and is the default setting 100 = Do not choose this trunk). Access: Online. AC INI… |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
acTrunkDeactivate
Deactivating a trunk forces AIS alarm on that trunk. Deactivation
is used for trunk maintenance without locking the trunk. Activating the trunk will stop the alarm on the trunk. notAvailable(0) appears when the trunk is… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11 |
acTrunkLineTable
table.1.3.6.1.4.1.5003.9.10.9.1.1.2.1
·
1 row entry
·
5 columns
Indexes
acTrunkIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
acTrunkLineBuildOutLoss
Used to select the line build out loss to be used for this trunk.
0 = 0 dB 1 = 7.5 dB 2 = 15 dB 3 = 22.5 dB. Access: Online. AC INI-Param: LINEBUILDOUT.LOSS |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.1 |
||||||||
|
acTrunkLineBuildOutOverwrite
Used to overwrite the Framer's XPM registers values (these registers
control the line pulse shape). 0 = No overwrite 1 = Overwrite. Access: Online. AC INI-Param: LINEBUILDOUT.OVERWRITE |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.2 |
||||||||
|
acTrunkLineBuildOutXPM0
Used to control the Framer's XPM0 register value (line pulse
shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 25… |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.3 |
||||||||
|
acTrunkLineBuildOutXPM1
Used to control the Framer's XPM1 register value (line pulse
shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Onlin… |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.4 |
||||||||
|
acTrunkLineBuildOutXPM2
Used to control the Framer's XPM2 register value (line pulse
shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 25… |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.5 |
acTrunkISDNCommonTable
table.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1
·
1 row entry
·
8 columns
Indexes
acTrunkIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
acTrunkISDNCommonTerminationSide
Used to set the ISDN Termination to either User or Network.
Termination = For ISDN only. User side = 0 Network side = 1. Access: Online. AC INI-Param: TERMINATIONSIDE |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.1 |
||||
|
acTrunkISDNCommonQ931LayerResponseBehavior
Bit-field used to determine several behavior options, which
influence how the Q.931 protocol behaves. Access: Online. AC INI-Param: ISDNIBEHAVIOR |
Integer32r/w Constraints: range: -2147483647-2147483647 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.2 |
||||
|
acTrunkISDNCommonIncomingCallsBehavior
This is the bit-field used to determine several behavior options
that influence how the ISDN Stack INCOMING calls behave. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual … |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.3 |
||||
|
acTrunkISDNCommonOutgoingCallsBehavior
This is the bit-field used to determine several behavior options
that influence how the ISDN Stack OUTGOING calls behave. Refer to Appendix A.8 in the 'VoPLib Reference Library User's Manual. Access: Online. AC INI-Para… |
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.4 |
||||
|
acTrunkISDNCommonGeneralCCBehavior
This is the bit-field used to determine several general ISDN
behavior options. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. Access: Online. AC … |
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.5 |
||||
|
acTrunkISDNCommonIuaInterfaceId
Defines the IUA trunk interface ID value - unsigned integer
- in RFC 3057 - SIGTRAN. Default = 0xFFFFFFFF. AC INI-Param: N/A |
Integer32 Constraints: range: -1-2147483647 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.6 |
||||
|
acTrunkISDNCommonDuplicateQ931BuffMode
Activates / de-activates delivery of raw Q.931 messages. Refer
to the VoPLib documentation ('ISDN Flexible Behavior'). Access: Online. AC INI-Param: ISDNDUPLICATEQ931BUFFMODE |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.7 |
||||
|
acTrunkISDNCommonBRILayer2Mode
Indicates point to point or point to Multipoint mode for layer2.
Applicable in BRI trunks only. One of the following values: Point to point = 0 Point to Multipoint = 1 . Access: Online. AC INI-Param: BriL… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.8 |
acTrunkISDNNfasTable
table.1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1
·
1 row entry
·
3 columns
Indexes
acTrunkIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
acTrunkISDNNfasDchConfig
Defines D-channel configuration. This setting is only applicable
to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = D-channel is Primary 1 = Backup 2 = NFAS. Access: Online. A… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.1 |
||||||
|
acTrunkISDNNfasInterfaceId
Defines the Interface ID. Works with NS_EXPLICIT_INTERFACE_ID.
Refer to the VoPLib documentation(ISDN Flexible Behavior). Default = (unsigned char)-1. Range = 0 to 255. Access: Online. AC I… |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.2 |
||||||
|
acTrunkISDNNfasGroupNumber
Relevant only for T1 ISDN NFAS trunks indicates the group number
of the NFAS group. ;Valid NFAS group numbers are only 1 to 9, 0 indicating that this trunk is not NFAS (in this case the ISDNNFASInterfaceID and DchConfig… |
Unsigned32r/w Constraints: range: 0-9 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.3 |
acTrunkISDNDpnssTable
table.1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1
·
1 row entry
·
3 columns
Indexes
acTrunkIndex
| Column | Syntax | OID |
|---|---|---|
|
acTrunkISDNDpnssBehavior
The DPNSSBehaviour parameter represents a Bit field parameter.
Each bit represents a specific type of DPNSS behavior. Currently only the first 2 bits are in use. - DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1… |
Unsigned32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.1 |
|
acTrunkISDNDpnssNumRealChannels
This parameter is relevant only to protocol ISDN DPNSS. Defines
the number of real channels. Default value is 30. Valid range 1 to 30. Access: Online. AC INI-Param: DPNSSNumRealChannels |
Unsigned32r/w Constraints: range: 1-30 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.2 |
|
acTrunkISDNDpnssNumVirtualChannels
This parameter is relevant only to protocol ISDN DPNSS. Defines
the number of virtual channels. Default value is 30. Valid range 0 to 30. Access: Online. AC INI-Param: DPNSSNumVirtualChannels |
Unsigned32r/w Constraints: range: 0-30 |
.1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.3 |
acTrunkCASTable
table.1.3.6.1.4.1.5003.9.10.9.1.1.4.1
·
1 row entry
·
2 columns
Indexes
acTrunkIndex
| Column | Syntax | OID |
|---|---|---|
|
acTrunkCASTablesIndex
This parameter determines which CAS protocol file to use on
a specific trunk. The index value corresponds to the number configured for the parameter CASFileName_X. Range = not greater than the parameter defining the PST… |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.1 |
|
acTrunkCASTablePerChannel
Sets the Cas protocol table index per channel.
User need to set each channel the table number 0-7, with comma saperator between channels: '1,3,1,3,1,3..'. Access: Online. AC INI-Param: CasChannelIndex |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.2 |
acTrunkV5Table
table.1.3.6.1.4.1.5003.9.10.9.1.1.5.1
·
1 row entry
·
2 columns
Indexes
acTrunkIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
acTrunkV5NumberOfCChannels
Indicates the number of timeslots used as communication channels
in a V5 trunk. 0 - No C-channel, the trunk is voice only. 1 - Timeslot 16 is used for the V5 signaling . Access: Online. AC INI-Param: V5Nu… |
Unsigned32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.1 |
||||
|
acTrunkV5ProtocolSide
Indicates the V5 side of the V5 protocol served by the trunk..
0 - AN side. 1 - LE side . Access: Online. AC INI-Param: V5ProtocolSide |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.2 |
acCASFileTable
table.1.3.6.1.4.1.5003.9.10.9.1.4.2.1
·
1 row entry
·
2 columns
Indexes
acCASFileIndex
| Column | Syntax | OID |
|---|---|---|
|
acCASFileIndex
Cas Table Indexd.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-7 |
.1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.1 |
|
acCASFileName
This is a pointer to the CAS filename index (0-7). The index
is CASFileName_X. CASFileName_0 through to CASFileName_7 are the path and names of the CAS protocol configuration files. AC INI-Param: CASFILENAME |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.2 |
acSonetSDHTable
table.1.3.6.1.4.1.5003.9.10.9.1.5.1
·
1 row entry
·
6 columns
Indexes
acSonetSDHIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
acSonetSDHIndex
Fiber groupe index.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 1-1 |
.1.3.6.1.4.1.5003.9.10.9.1.5.1.1.1 |
||||||||
|
acSonetSDHFbrGrpMappingType
Selects SDH/SONET mapping type (signal label + payload mapping
type) for the PSTN interface. Generally per Fiber Group. Single Fiber Group supported in the PSTN interface of TP6310 and TP12610. Applicable only to the TP… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.5.1.1.2 |
||||||||
|
acSonetSDHFbrGrpKlmNumberingScheme
Provides VC/VT numbering scheme for STM-1/OC3 fiber group.
Access: Offline. AC INI-Param: SDHFbrGrp_KLM_Numbering_Scheme |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.5.1.1.3 |
||||||||
|
acSonetSDHFbrGrpAPSDirectionMode
Sets the Automatic Protection Switch Unidir/Bidir mode for the
Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_DirMode |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.5.1.1.4 |
||||||||
|
acSonetSDHFbrGrpAPSRevertMode
Sets the Automatic Protection Switch Revertive mode for the
Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_RevertMode |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.1.5.1.1.5 |
||||||||
|
acSonetSDHFbrGrpAPSWaitToRestoreTime
Sets the APS Wait-to-restore time for the Fiber Group.
Access: Offline. AC INI-Param: SDHFbrGrp_APS_WTR |
Unsigned32r/w Constraints: range: 5-12 |
.1.3.6.1.4.1.5003.9.10.9.1.5.1.1.6 |
acTrunkStatusTable
table.1.3.6.1.4.1.5003.9.10.9.2.1.1
·
1 row entry
·
7 columns
Indexes
acTrunkIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
acTrunkStatusLedStatusColor
Trunk led status color.
AC INI-Param: N/A |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.2.1.1.1.1 |
||||||||||||||
|
acTrunkStatusLedStatusState
Trunk led status blinking rate.
AC INI-Param: N/A |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.2.1.1.1.2 |
||||||||||||||
|
acTrunkStatusChannels
Reperesents Trunk's Channels-Status.
Each nibble (half Byte) presents one channel status, as following: 1 - invalid B-Channel. 2 - None. 3 - Open. 4 - Media. 5 - SS7. 6 - HDLC. 7 - DPNSS. 8 - CAS. AC INI-Param: N/A |
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.5003.9.10.9.2.1.1.1.3 |
||||||||||||||
|
acTrunkStatusV5InterfaceNum
V5.2 interface containing this trunk.
-1 means information not available or not relevant. AC INI-Param: N/A |
Integer32 Constraints: range: -1-31 |
.1.3.6.1.4.1.5003.9.10.9.2.1.1.1.4 |
||||||||||||||
|
acTrunkStatusV5LinkID
V5.2 link containing this trunk.
-1 means information not available or not relevant. AC INI-Param: N/A |
Integer32 Constraints: range: -1-62 |
.1.3.6.1.4.1.5003.9.10.9.2.1.1.1.5 |
||||||||||||||
|
acTrunkStatusDChannel
Describes the trunk's D channel status.
0 - dChannelEstablished 1 - dChannelNotEstablished 10 - dChannelNotApplicable. AC INI-Param: N/A |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.2.1.1.1.6 |
||||||||||||||
|
acTrunkStatusAlarm
Describes the trunk's alarm status.
1 - Disabled. 2 - Active - OK. 3 - LOS/LOF Alarm. 4 - AIS Alarm. 5 - RAI Alram. 6 - D-Channel Alarm. 7 - Lower Layer Down. AC INI-Param: N/A |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.2.1.1.1.7 |
acDigitalLegsTable
table.1.3.6.1.4.1.5003.9.10.9.2.2.1
·
1 row entry
·
11 columns
Indexes
acDigitalLegsLegIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
acDigitalLegsLegIndex
Decribes The Digital EndPoint In A Call.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-5000 |
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.1 |
||||
|
acDigitalLegsCallIndex
Decribes The Call which The Digital EndPoint Participant In
It. AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-5000 |
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.2 |
||||
|
acDigitalLegsTrunk
Describes the Trunk the Leg belong to.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.3 |
||||
|
acDigitalLegsBchannel
Describes the Bchannel the Leg belong to.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-76500 |
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.4 |
||||
|
acDigitalLegsEchoCanceller
Enables or Disables the Echo Canceller.
AC INI-Param: N/A |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.5 |
||||
|
acDigitalLegsDTMFDetection
Enables or Disables the DTMF Detection.
AC INI-Param: N/A |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.6 |
||||
|
acDigitalLegsVoiceVolume
Describs the volume of the voice in dB.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-20000 |
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.7 |
||||
|
acDigitalLegsHighPassFilter
Enables or Disables theHigh Pass Filter.
AC INI-Param: N/A |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.8 |
||||
|
acDigitalLegsInputGain
Describes the Input Gain on the leg in dB.
AC INI-Param: N/A |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.9 |
||||
|
acDigitalLegsDSPDevice
describes the DSP Device the Leg connected to.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-20000 |
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.10 |
||||
|
acDigitalLegsLegName
Describes the Leg Name as in the Control Protocol.
AC INI-Param: N/A |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.5003.9.10.9.2.2.1.1.11 |
.1.3.6.1.4.1.5003.9.10.9.2.3.1
·
1 row entry
·
4 columns
Indexes
acSDHKLMNumberingSchemeTrunkIndex
| Column | Syntax | OID |
|---|---|---|
|
acSDHKLMNumberingSchemeTrunkIndex
Trunk Number.
AC INI-Param: N/A |
Unsigned32 Constraints: range: 0-5000 |
.1.3.6.1.4.1.5003.9.10.9.2.3.1.1.1 |
|
acSDHKLMNumberingSchemeTUG3OrSTS1
AC INI-Param: N/A
|
Unsigned32 Constraints: range: 1-3 |
.1.3.6.1.4.1.5003.9.10.9.2.3.1.1.2 |
|
acSDHKLMNumberingSchemeTUG2OrVTG
AC INI-Param: N/A
|
Unsigned32 Constraints: range: 1-7 |
.1.3.6.1.4.1.5003.9.10.9.2.3.1.1.3 |
|
acSDHKLMNumberingSchemeTU12OrVT15
AC INI-Param: N/A
|
Unsigned32 Constraints: range: 1-4 |
.1.3.6.1.4.1.5003.9.10.9.2.3.1.1.4 |