acTrunkDialPlanName

AC-PSTN-MIB · .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8

MIB view Table view

Object

column r/w OctetString

Sets the Dial Plan name that will be used on the specific trunk.
              
Range = string 11 characters.
Access: Instant.
AC INI-Param: CasTrunkDialPlanName

Context

MIB: AC-PSTN-MIB
OID: .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8
Type: column
Access: readwrite
Status: current
Parent: acTrunkEntry
Table: acTrunkTable
Siblings: 10

Syntax

OctetString

Values & Constraints

Object Constraints

range: 0-11

Related Objects

Sibling Objects

Object	Type	Syntax	OID
acTrunkIndex Trunk ID at board in which the call is taking place. AC INI-Param: N/A	column	Unsigned32	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1`
acTrunkAutoClockPriority Defines the trunk priority for auto-clock fallback (Priority range: 0 - 100 (0 - 99 are priority settings, in which 0 = highest Priority and is the default setting 100 = Do not ch…	column	Unsigned32	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.10`
acTrunkDeactivate Deactivating a trunk forces AIS alarm on that trunk. Deactivation is used for trunk maintenance without locking the trunk. Activating the trunk will stop the alarm on the trunk. n…	column	Enumeration	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11`
acTrunkAdministrativeState Trunk Administrative State. Access: Online. AC INI-Param: N/A	column	Enumeration	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.2`
acTrunkProtocolType Used to set the PSTN protocol to be used for this trunk. Relevant only when TDMBusType=acFRAMERS (2). Either: NONE = 0 E1_EURO_ISDN = 1 T1_CAS = 2 T1_RAW_CAS = 3 T1_TRANSPARE…	column	Enumeration	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.3`
acTrunkClockMaster Used to select the trunk clock source. 0 = acCLOCK_MASTER_OFF (clock recovered from the line) 1 = acCLOCK_MASTER_ON (the trunk clock source is provided by the inte…	column	Enumeration	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.4`
acTrunkFramingMethod Selects the Framing method to be used for this trunk. Access: Online. AC INI-Param: N/A	column	Enumeration	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.5`
acTrunkLineCode Use to select line code. B8ZS or AMI for T1 spans and HDB3 or AMI for E1 spans. 0 = Use B8ZS line code (for T1 trunks only = default) 1 = Use AMI line code (for T1 …	column	Enumeration	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.6`
acTrunkTraceLevel Defines the Trace level: acNO_TRACE = 0 acFULL_ISDN_TRACE = 1 acLAYER3_ISDN_TRACE = 2 acONLY_ISDN_Q931_MSGS_TRACE = 3 acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4 acFULL_ISDN_TRACE_WITH…	column	Enumeration	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.7`
acTrunkLineType Line type. lineTypeBRI(12) - If the physical type is BRI. lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are other lines that are already configured to either E1 or T1.…	column	Enumeration	`.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.9`