acTrunkIndex
AC-PSTN-MIB ·
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1
Object
column
Unsigned32
Trunk ID at board in which the call is taking place. AC INI-Param: N/A
Context
- MIB
- AC-PSTN-MIB
- OID
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- acTrunkEntry
- Table
- acTrunkTable
- Siblings
- 10
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-83
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acTrunkAutoClockPriority Defines the trunk priority for auto-clock fallback (Priority
range: 0 - 100 (0 - 99 are priority settings, in which 0 =
highest Priority and is the default setting
100 = Do not ch… | column | Unsigned32 | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.10 |
| acTrunkDeactivate Deactivating a trunk forces AIS alarm on that trunk. Deactivation
is used for trunk maintenance without locking the trunk.
Activating the trunk will stop the alarm on the trunk.
n… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11 |
| acTrunkAdministrativeState Trunk Administrative State.
Access: Online.
AC INI-Param: N/A | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.2 |
| acTrunkProtocolType Used to set the PSTN protocol to be used for this trunk. Relevant
only when TDMBusType=acFRAMERS (2).
Either:
NONE = 0
E1_EURO_ISDN = 1
T1_CAS = 2
T1_RAW_CAS = 3
T1_TRANSPARE… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.3 |
| acTrunkClockMaster Used to select the trunk clock source.
0 = acCLOCK_MASTER_OFF (clock recovered from the line)
1 = acCLOCK_MASTER_ON (the trunk clock source is provided by
the inte… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.4 |
| acTrunkFramingMethod Selects the Framing method to be used for this trunk.
Access: Online.
AC INI-Param: N/A | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.5 |
| acTrunkLineCode Use to select line code. B8ZS or AMI for T1 spans and HDB3 or
AMI for E1 spans.
0 = Use B8ZS line code (for T1 trunks only = default)
1 = Use AMI line code (for T1 … | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.6 |
| acTrunkTraceLevel Defines the Trace level:
acNO_TRACE = 0
acFULL_ISDN_TRACE = 1
acLAYER3_ISDN_TRACE = 2
acONLY_ISDN_Q931_MSGS_TRACE = 3
acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4
acFULL_ISDN_TRACE_WITH… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.7 |
| acTrunkDialPlanName Sets the Dial Plan name that will be used on the specific trunk.
Range = string 11 characters.
Access: Instant.
AC INI-Param: CasTrunkDialPlanName | column | OctetString | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8 |
| acTrunkLineType Line type.
lineTypeBRI(12) - If the physical type is BRI.
lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are
other lines that are already configured to either E1 or T1.… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.9 |