acTrunkDeactivate
AC-PSTN-MIB ·
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11
Object
column
r/w
Enumeration
Deactivating a trunk forces AIS alarm on that trunk. Deactivation is used for trunk maintenance without locking the trunk. Activating the trunk will stop the alarm on the trunk. notAvailable(0) appears when the trunk is locked. The trunk can't be SET to this state. Access: Online. AC INI-Param: N/A
Context
- MIB
- AC-PSTN-MIB
- OID
.1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- acTrunkEntry
- Table
- acTrunkTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | notAvailable |
1 | deActivated |
2 | activated |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acTrunkIndex Trunk ID at board in which the call is taking place.
AC INI-Param: N/A | column | Unsigned32 | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1 |
| acTrunkAutoClockPriority Defines the trunk priority for auto-clock fallback (Priority
range: 0 - 100 (0 - 99 are priority settings, in which 0 =
highest Priority and is the default setting
100 = Do not ch… | column | Unsigned32 | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.10 |
| acTrunkAdministrativeState Trunk Administrative State.
Access: Online.
AC INI-Param: N/A | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.2 |
| acTrunkProtocolType Used to set the PSTN protocol to be used for this trunk. Relevant
only when TDMBusType=acFRAMERS (2).
Either:
NONE = 0
E1_EURO_ISDN = 1
T1_CAS = 2
T1_RAW_CAS = 3
T1_TRANSPARE… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.3 |
| acTrunkClockMaster Used to select the trunk clock source.
0 = acCLOCK_MASTER_OFF (clock recovered from the line)
1 = acCLOCK_MASTER_ON (the trunk clock source is provided by
the inte… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.4 |
| acTrunkFramingMethod Selects the Framing method to be used for this trunk.
Access: Online.
AC INI-Param: N/A | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.5 |
| acTrunkLineCode Use to select line code. B8ZS or AMI for T1 spans and HDB3 or
AMI for E1 spans.
0 = Use B8ZS line code (for T1 trunks only = default)
1 = Use AMI line code (for T1 … | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.6 |
| acTrunkTraceLevel Defines the Trace level:
acNO_TRACE = 0
acFULL_ISDN_TRACE = 1
acLAYER3_ISDN_TRACE = 2
acONLY_ISDN_Q931_MSGS_TRACE = 3
acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4
acFULL_ISDN_TRACE_WITH… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.7 |
| acTrunkDialPlanName Sets the Dial Plan name that will be used on the specific trunk.
Range = string 11 characters.
Access: Instant.
AC INI-Param: CasTrunkDialPlanName | column | OctetString | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8 |
| acTrunkLineType Line type.
lineTypeBRI(12) - If the physical type is BRI.
lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are
other lines that are already configured to either E1 or T1.… | column | Enumeration | .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.9 |