A3COM-HUAWEI-POWER-ETH-EXT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
9
Rows
9
Columns
45
h3cPsePortTable
table.1.3.6.1.4.1.43.45.1.10.2.14.1
·
1 row entry
·
6 columns
The indexing scheme is taken form that used by the IETF Power MIB. The same indexing scheme is used to give continuity in behaviour between that standard and this extensions definitioin.
The pethPsePortGroupIndex is imported from the IETF Power MIB
and uniquely identifies the group containing the port to which
power ethernet PSE is connected. Group means (box in the stack,
module in a rack).
…
and uniquely identifies the group containing the port to which
power ethernet PSE is connected. Group means (box in the stack,
module in a rack).
…
Indexes
POWER-ETHERNET-MIBpethPsePortGroupIndex POWER-ETHERNET-MIBpethPsePortIndex
| Column | Syntax | OID |
|---|---|---|
|
h3cPsePortFaultDescription
The object supports the fault category of the IETF Power MIB [1]
pethPsePortDetectionStatus object. A textual description containing more information about the nature of this fault is provided by this object. Typicall… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.43.45.1.10.2.14.1.1.2 |
|
h3cPsePortPeakPower
The object specifies the peak power which has been consumed by
the port. It is defined as the highest measured value of power in milliWatts that has been consumed by the port. Its value is only reset when link is lost… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.1.1.3 |
|
h3cPsePortAveragePower
The object specifies the average power which has been consumed
by the port. This object is a read/write integer value with units of milliWatts. Writing a value of zero to this object resets its value to zero. Writing… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.1.1.4 |
|
h3cPsePortCurrentPower
The object specifies the power currently being consumed by the port.
It is a read only integer value with units of milliWatts. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.1.1.5 |
|
h3cPsePortPowerLimit
The object specifies the power limit set for this port.
The PSE will not supply more than this level of power to the specified port. It is a read/write integer value with units of milliWatts. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.1.1.6 |
|
h3cPsePortProfileIndex
Indicates the power profile which is currently associated
with this port. This object references the corresponding h3cPseProfileIndex object in the power profiles table. A value of zero is a special case and indicates… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.43.45.1.10.2.14.1.1.7 |
h3cMainPseTable
table.1.3.6.1.4.1.43.45.1.10.2.14.2
·
1 row entry
·
7 columns
Description.
The pethMainPseGroupIndex is imported from the IETF Power MIB
and uniquely identifies the group containing the port to which
power ethernet PSE is connected. Group means (box in the stack,
module in a rack) and the val…
and uniquely identifies the group containing the port to which
power ethernet PSE is connected. Group means (box in the stack,
module in a rack) and the val…
Indexes
POWER-ETHERNET-MIBpethMainPseGroupIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
h3cMainPsePowerLimit
The object specifies the power limit set for the unit as a whole.
The PoE unit will already have a nominal power defined by the IETF Power MIB [1] pethMainPsePower object. This OPTIONAL object specifies a further limit… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.2.1.1 |
||||||
|
h3cMainPseAveragePower
The object specifies the average power which has been consumed
by the port. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.2.1.2 |
||||||
|
h3cMainPsePeakPower
The object specifies the peak power which has been consumed for PoE.
It is defined as the highest measured value of power in milliWatts that has been consumed at any one point in time by the sum of the PoE ports. Its v… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.2.1.3 |
||||||
|
h3cMainGuaranteedPowerRemaining
The object specifies the amount of power remaining in the guaranteed
power pool. Each time a port is placed into guaranteed mode it reserves a set amount of power out of the total guaranteed power pool for the system. … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.2.1.4 |
||||||
|
h3cMainPsePriorityMode
Describes or controls the priority mode on slot which must be
enabled firstly. When a new board is inserted, and the power is over-load, a value of disconnection(0) means that the power will stop supply to the low prio… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.2.1.5 |
||||||
|
h3cMainPseLegacy
Describes or controls the legacy mode on slot which must be enabled
firstly. Legacy mode: standard or nonstandard PD detection mode. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.2.1.6 |
||||||
|
h3cMainPsePowerPriority
Describes or controls the priority of the PSE. The priority
will be used by the PSE policy to prevent from power overloading. If the priority of PSE is set to critical, the PSE will turn into guaranteed mode. The prio… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.2.1.7 |
h3cPseProfilesTable
table.1.3.6.1.4.1.43.45.1.10.2.14.7
·
1 row entry
·
8 columns
A table of objects representing a set of power profiles. Power profiles can be applied to PoE ports, which have the effect of automatically setting the priority, power limit and PoE enable MIB objects to the values specified in the power profile.
A set of objects that display and control the Main power of a PSE.
Indexes
h3cPseProfileIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
h3cPseProfileIndex
The index of the profile. This uniquely allow the profile to be
identified. |
Integer32 Constraints: range: 1-100 |
.1.3.6.1.4.1.43.45.1.10.2.14.7.1.1 |
||||||||||||
|
h3cPseProfileName
Assigns the profile a name with which the settings
can be assiciated with. For example, 'NBX Phone'. |
OctetStringr/w Constraints: range: 1-15 |
.1.3.6.1.4.1.43.45.1.10.2.14.7.1.2 |
||||||||||||
|
h3cPseProfilePowerMode
The power mode associated with this power profile. There
are two possible power modes as follows: powerDisabled, powerEnabled. When a power profile is applied to a PSE port, this value dictates the settings of the por… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.7.1.3 |
||||||||||||
|
h3cPseProfilePowerLimit
The power limit to be applied to the ports h3cPsePortPowerLimit
object when the profile is applied to the PSE port. Expressed in milliWatts. |
Integer32r/w Constraints: range: 0-15400 |
.1.3.6.1.4.1.43.45.1.10.2.14.7.1.4 |
||||||||||||
|
h3cPseProfilePriority
This object controls the priority of the port from the point of
view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.7.1.5 |
||||||||||||
|
h3cPseProfilePairs
Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in use. A value of spare(2) means that th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.7.1.6 |
||||||||||||
|
h3cPseProfileApplyNum
The number of this profile which has been applied.
If h3cPseProfileApplyNum is not zero, user can't change the current line. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.7.1.7 |
||||||||||||
|
h3cPseProfileRowStatus
The status of this classifier.
If h3cPseProfileApplyNum is not zero, user can't delete the current line. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.7.1.8 |
h3cPOEModuleInfoTable
table.1.3.6.1.4.1.43.45.1.10.2.14.8.2.7
·
1 row entry
·
4 columns
The table of the module information on this POE power.
The entry of the module information on this POE power.
Indexes
h3cPOEModuleIndex
| Column | Syntax | OID |
|---|---|---|
|
h3cPOEModuleIndex
The index of the current module on this POE power.
It is also the index of h3cPOEModuleInfoTable. The range of this node is from 1 to h3cPOEPowerModuleNum. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.2.7.1.1 |
|
h3cPOEModuleID
The ID of the current module on this POE power.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.2.7.1.2 |
|
h3cPOEModuleInfoPower
The power of the current module on this POE power.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.2.7.1.3 |
|
h3cPOEModuleHardVerInfo
The hardware version information of the current module on this POE power.
|
OctetString Constraints: range: 1-127 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.2.7.1.4 |
h3cPOEDCOutStateTable
table.1.3.6.1.4.1.43.45.1.10.2.14.8.3.2
·
1 row entry
·
2 columns
The table of DC output power state on this POE power.
The entry of the DC output power state on this POE power.
Indexes
h3cPOEDCOutStateIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
h3cPOEDCOutStateIndex
The index of the DC output power state on this POE power.
The range of this node is from 1 to h3cPOEDCOutStateModuleNum. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.3.2.1.1 |
||||||||||||
|
h3cPOEDCOutDCVolAlarm
The DC output alarm of the DC output power state on this POE power.
The value of this node will be the following values: normal (1), underLimit (2), aboveL… |
DCAlarmState Textual Convention: DCAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.3.2.1.2 |
h3cPOEDCOutInfoTable
table.1.3.6.1.4.1.43.45.1.10.2.14.8.4.2
·
1 row entry
·
3 columns
The table of the DC output information on this POE power.
The entry of the DC output information on this POE power.
Indexes
h3cPOEDCOutInfoIndex
| Column | Syntax | OID |
|---|---|---|
|
h3cPOEDCOutInfoIndex
The index of the DC output information on this POE POWER.
The range of this node is from 1 to h3cPOEDCOutCurNum. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.4.2.1.1 |
|
h3cPOEDCOutVol
The DC output voltage of the current DC output on this POE power.
|
OctetString Constraints: range: 1-10 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.4.2.1.2 |
|
h3cPOEDCOutInfoLoadCur
The total load current of the current DC output on this POE power.
|
OctetString Constraints: range: 1-10 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.4.2.1.3 |
h3cPOEACSwitchStateTable
table.1.3.6.1.4.1.43.45.1.10.2.14.8.5.2
·
1 row entry
·
2 columns
The table of the AC switch state on this POE power.
The entry of the AC switch state on this POE power.
Indexes
h3cPOEACSwitchStateIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
h3cPOEACSwitchStateIndex
The index of the AC switch state on this POE power.
The range of this node is from 1 to h3cPOEACSwitchStateModuleNum. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.5.2.1.1 |
||||||||
|
h3cPOEACSwitchState
The AC switch state on this POE power.
The value of this node will be one of the following values: on (1), off (2), highVoltInput (3), … |
SwitchState Textual Convention: SwitchState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.5.2.1.2 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.6.5
·
1 row entry
·
4 columns
All alarm status of the VOL status.
The value of this node will be one of the following values:
normal (1),
underLimit (2),
aboveLimit (3),
lackPhrase (4),
fuseBroken (5),
switchOff (6),
otherError (7).
The h3cPOESwitchStateVolExIndex will match the number of the VOL status.
Indexes
h3cPOESwitchStateVolExIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
h3cPOESwitchStateVolExIndex
The object species the index of the VOL status.
The range of this node is from 1 to h3cPOEInCurStateModuleNum. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.6.5.1.1 |
||||||||||||||
|
h3cPOESwitchStateInVolAB
The object specifies the VOL AB alarm in each VOL status.
The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimi… |
ACAlarmState Textual Convention: ACAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.6.5.1.2 |
||||||||||||||
|
h3cPOESwitchStateInVolBC
The object specifies the VOL BC alarm in each VOL status.
The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimi… |
ACAlarmState Textual Convention: ACAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.6.5.1.3 |
||||||||||||||
|
h3cPOESwitchStateInVolCA
The object specifies the VOL CA alarm in each VOL status.
The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimi… |
ACAlarmState Textual Convention: ACAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.6.5.1.4 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2
·
1 row entry
·
9 columns
All alarm states in the POE power modules.
The h3cPOEAlarmModuleInfoIndex will match the number
of the power module.
of the power module.
Indexes
h3cPOEAlarmModuleInfoIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
h3cPOEAlarmModuleInfoIndex
The index specifies the index of the H3cPOEAlarmStateInfoEntry table.
The range of this node is from 1 to h3cPOEAlarmStateModuleNum. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.1 |
||||
|
h3cPOEModuleDisconnect
The node specifies the alarm state:
The module does not link. The value of this node is one of the following values: normal (1), alarm (2). |
ModuleAlarmState Textual Convention: ModuleAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.2 |
||||
|
h3cPOEModuleInputError
The node specifies the alarm state:
Input error. The value of this node is one of the following values: normal (1), alarm (2). |
ModuleAlarmState Textual Convention: ModuleAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.3 |
||||
|
h3cPOEModuleOutputError
The node specifies the alarm state:
Output error. The value of this node is one of the following values: normal (1), alarm (2). |
ModuleAlarmState Textual Convention: ModuleAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.4 |
||||
|
h3cPOEModuleOverVoltage
The node specifies the alarm state:
The voltage is too high. The value of this node is one of the following values: normal (1), alarm (2). |
ModuleAlarmState Textual Convention: ModuleAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.5 |
||||
|
h3cPOEModuleOverTemp
The node specifies the alarm state:
The temperature is too high. The value of this node is one of the following values: normal (1), alarm (2). |
ModuleAlarmState Textual Convention: ModuleAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.6 |
||||
|
h3cPOEModuleFanError
The node specifies the alarm state:
The fan error. The value of this node is one of the following values: normal (1), alarm (2). |
ModuleAlarmState Textual Convention: ModuleAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.7 |
||||
|
h3cPOEModuleShutdown
The node specifies the alarm state:
The module is shutdown. The value of this node is one of the following values: normal (1), alarm (2). |
ModuleAlarmState Textual Convention: ModuleAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.8 |
||||
|
h3cPOEModuleCurRestricted
The node specifies the alarm state:
The module limit the current. The value of this node is one of the following values: normal (1), alarm (2). |
ModuleAlarmState Textual Convention: ModuleAlarmState EnumerationType Values:
|
.1.3.6.1.4.1.43.45.1.10.2.14.8.7.2.1.9 |