v52UserPortRowStatus
ZhoneV52-MIB ·
.1.3.6.1.4.1.5504.4.3.2.6.1.10
Object
Used to control row creation and deletion.
A row in this table is created using a single
SNMP SET request with varbinds for:
a) v52UserPortRowStatus set to'CreateAndGo',
b) the following READ-CREATE object(s):
* v52UserPortAddress
If 'createAndGo' successfully created a new row,
the RowStatus will be 'active'. Subsequent to
successful row creation, the RowStatus can be
retrieved via an SNMP GET and the returned
RowStatus value is active. If the 'createAndGo'
was unsuccessful an SNMP error will be returned
and a subsequent GET on the non-existent row
will also return an SNMP error of noSuchInstance.
An SNMP SET with the RowStatus value of 'destroy'
indicates that the agent should remove the row
from service and then delete it.
Context
- MIB
- ZhoneV52-MIB
- OID
.1.3.6.1.4.1.5504.4.3.2.6.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- v52UserPortEntry
- Table
- v52UserPortTable
- Siblings
- 10
Values & Constraints
Type Values
1 | active |
4 | createAndGo |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| v52UserPortAddress User Port Address. If UserPortType is PSTN, valid
range is 0..32767. If UserPortType is ISDN, valid
range is 0..8175. Maximum value is 32767.
The actual address ran… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.1 |
| v52UserPortOperStatus User port operational status. Valid values are inService,
manualOos and Oos.
* 'inService' - the user port is ready to carry calls.
* 'manualOos' - t… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.11 |
| v52UserPortType User Port type. Valid values are unknown, pstn,
isdnBa, isdnPra. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.2 |
| v52UserPortAdminStatus UserPort Admin Status. Valid values are inService
and outOfService. Default is outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.3 |
| v52UserPortBlock The Q3 interface of the access network can request
that a port be blocked for non-urgent configuration or
reconfiguration. If the port is routed through a V5
interface to a loc… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.4 |
| v52UserPortBlockStatus UserPortBlock operational status.
Valid values are:
* localBlocked - local is blocked
* remoteBlocked - remote is blocked
* bothBlocked - both local and remote are … | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.5 |
| v52UserPortRegOrLeaseUser User is a regular, permanent lease, or semi-permanent
leaseuser. Valid values are regular, permanentLease,
semiPermanentLease. Default is regular. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.6 |
| v52UserPortIsdnDsCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry Ds-type data, the value of
this variable should b… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.7 |
| v52UserPortIsdnPCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry p-type data, the value of
this variable should be… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.8 |
| v52UserPortIsdnFCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry f-type data, the value of
this variable should be… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.9 |