v52UserPortOperStatus
ZhoneV52-MIB ·
.1.3.6.1.4.1.5504.4.3.2.6.1.11
Object
column
Enumeration
User port operational status. Valid values are inService,
manualOos and Oos.
* 'inService' - the user port is ready to carry calls.
* 'manualOos' - the user port has been manually put into OOS
state.
* 'oos' - the user port is in out of service state even
though the port admin state is set to in service.
Context
- MIB
- ZhoneV52-MIB
- OID
.1.3.6.1.4.1.5504.4.3.2.6.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- v52UserPortEntry
- Table
- v52UserPortTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | inService |
2 | manualOos |
3 | oos |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| v52UserPortAddress User Port Address. If UserPortType is PSTN, valid
range is 0..32767. If UserPortType is ISDN, valid
range is 0..8175. Maximum value is 32767.
The actual address ran… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.1 |
| v52UserPortRowStatus Used to control row creation and deletion.
A row in this table is created using a single
SNMP SET request with varbinds for:
a) v52UserPortRowStatus set to'Create… | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.4.3.2.6.1.10 |
| v52UserPortType User Port type. Valid values are unknown, pstn,
isdnBa, isdnPra. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.2 |
| v52UserPortAdminStatus UserPort Admin Status. Valid values are inService
and outOfService. Default is outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.3 |
| v52UserPortBlock The Q3 interface of the access network can request
that a port be blocked for non-urgent configuration or
reconfiguration. If the port is routed through a V5
interface to a loc… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.4 |
| v52UserPortBlockStatus UserPortBlock operational status.
Valid values are:
* localBlocked - local is blocked
* remoteBlocked - remote is blocked
* bothBlocked - both local and remote are … | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.5 |
| v52UserPortRegOrLeaseUser User is a regular, permanent lease, or semi-permanent
leaseuser. Valid values are regular, permanentLease,
semiPermanentLease. Default is regular. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.6 |
| v52UserPortIsdnDsCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry Ds-type data, the value of
this variable should b… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.7 |
| v52UserPortIsdnPCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry p-type data, the value of
this variable should be… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.8 |
| v52UserPortIsdnFCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry f-type data, the value of
this variable should be… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.9 |