v52UserPortBlock

ZhoneV52-MIB · .1.3.6.1.4.1.5504.4.3.2.6.1.4

Object

column r/w Enumeration

The Q3 interface of the access network can request 
that a port be blocked for non-urgent configuration or 
reconfiguration. If the port is routed through a V5 
interface to a local exchange, then this request can 
only be granted by the local exchange via the V5 
interface. This is intended to avoid interference with 
calls in progress, or calls being set up or cleared down.
              
The Q3 interface on the access network can request 
that a port be blocked for urgent configuration or 
reconfiguration. If the port is routed through a V5 
interface to a local exchange, the other side of the 
interface shall be informed of this blocking via the V5 
interface.
              
Valid values are:
              
* 'blocked' - the user port can be unblocked by both 
  accelerated port alignment (i.e. group unblocking)
  and sequential port alignment.
              
* 'shuttingDown' - same as 'blocked' except active
  calls will not be blocked until the calls are
  completed.
              
* 'unblocked' - port will be unblocked regardless
  of its previous port block state.
              
* 'blockedNotSuitableForGroupUnblocking' - the user
  port cannot be unblocked by accelerated port 
  alignment unblocking but can be unblocked by 
  sequential unblocking.
              
Default value is blocked.

Context

MIB: ZhoneV52-MIB
OID: .1.3.6.1.4.1.5504.4.3.2.6.1.4
Type: column
Access: readwrite
Status: current
Parent: v52UserPortEntry
Table: v52UserPortTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	blocked
`2`	shuttingDown
`3`	unblocked
`4`	blockedNotSuitableForGroupUnblocking

Related Objects

Sibling Objects

Object	Type	Syntax	OID
v52UserPortAddress User Port Address. If UserPortType is PSTN, valid range is 0..32767. If UserPortType is ISDN, valid range is 0..8175. Maximum value is 32767. The actual address ran…	column	Integer32	`.1.3.6.1.4.1.5504.4.3.2.6.1.1`
v52UserPortRowStatus Used to control row creation and deletion. A row in this table is created using a single SNMP SET request with varbinds for: a) v52UserPortRowStatus set to'Create…	column	Zhone-TCZhoneRowStatus	`.1.3.6.1.4.1.5504.4.3.2.6.1.10`
v52UserPortOperStatus User port operational status. Valid values are inService, manualOos and Oos. * 'inService' - the user port is ready to carry calls. * 'manualOos' - t…	column	Enumeration	`.1.3.6.1.4.1.5504.4.3.2.6.1.11`
v52UserPortType User Port type. Valid values are unknown, pstn, isdnBa, isdnPra.	column	Enumeration	`.1.3.6.1.4.1.5504.4.3.2.6.1.2`
v52UserPortAdminStatus UserPort Admin Status. Valid values are inService and outOfService. Default is outOfService.	column	Enumeration	`.1.3.6.1.4.1.5504.4.3.2.6.1.3`
v52UserPortBlockStatus UserPortBlock operational status. Valid values are: * localBlocked - local is blocked * remoteBlocked - remote is blocked * bothBlocked - both local and remote are …	column	Enumeration	`.1.3.6.1.4.1.5504.4.3.2.6.1.5`
v52UserPortRegOrLeaseUser User is a regular, permanent lease, or semi-permanent leaseuser. Valid values are regular, permanentLease, semiPermanentLease. Default is regular.	column	Enumeration	`.1.3.6.1.4.1.5504.4.3.2.6.1.6`
v52UserPortIsdnDsCPathId An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry Ds-type data, the value of this variable should b…	column	Integer32	`.1.3.6.1.4.1.5504.4.3.2.6.1.7`
v52UserPortIsdnPCPathId An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry p-type data, the value of this variable should be…	column	Integer32	`.1.3.6.1.4.1.5504.4.3.2.6.1.8`
v52UserPortIsdnFCPathId An ISDN user port can carry more than one type of the Ds-type, p-type and f-type data. When this user port is configured to carry f-type data, the value of this variable should be…	column	Integer32	`.1.3.6.1.4.1.5504.4.3.2.6.1.9`