v52UserPortAddress
ZhoneV52-MIB ·
.1.3.6.1.4.1.5504.4.3.2.6.1.1
Object
column
Integer32
User Port Address. If UserPortType is PSTN, valid
range is 0..32767. If UserPortType is ISDN, valid
range is 0..8175. Maximum value is 32767.
The actual address range is further limited by the
following rules:
PSTN:
v52IgPstnLayer3StartAddress <= v52UserPortAddress <
v52IgPstnLayer3StartAddress + maximum_PSTN_users_allowed_per_IG
ISDN:
v52IgIsdnEnvFuncStartAddress <= v52UserPortAddress <
v52IgIsdnEnvFuncStartAddress + maximum_ISDN_users_allowed_per_IG
Further, the total number of user ports is restricted by
the following rule:
Total_Pstn_User_Ports + 2*Total_Isdn_Bri_User_Ports <=
Total_User_Ports_Supported_Per_Platform.
ISDN PRI is not supported by the current release.
For the current 8 E1 release of Sechtor 100:
--------------------------------------------
maximum_PSTN_users_allowed_per_IG is 1920.
maximum_ISDN_users_allowed_per_IG is 960.
maximum users supported on the entire Sechtor 100 is 4800.
The maximum number of PSTN and ISDN user ports supported
for the 16 E1 release will be updated in the near future.
Context
- MIB
- ZhoneV52-MIB
- OID
.1.3.6.1.4.1.5504.4.3.2.6.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- v52UserPortEntry
- Table
- v52UserPortTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-32767
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| v52UserPortRowStatus Used to control row creation and deletion.
A row in this table is created using a single
SNMP SET request with varbinds for:
a) v52UserPortRowStatus set to'Create… | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.4.3.2.6.1.10 |
| v52UserPortOperStatus User port operational status. Valid values are inService,
manualOos and Oos.
* 'inService' - the user port is ready to carry calls.
* 'manualOos' - t… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.11 |
| v52UserPortType User Port type. Valid values are unknown, pstn,
isdnBa, isdnPra. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.2 |
| v52UserPortAdminStatus UserPort Admin Status. Valid values are inService
and outOfService. Default is outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.3 |
| v52UserPortBlock The Q3 interface of the access network can request
that a port be blocked for non-urgent configuration or
reconfiguration. If the port is routed through a V5
interface to a loc… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.4 |
| v52UserPortBlockStatus UserPortBlock operational status.
Valid values are:
* localBlocked - local is blocked
* remoteBlocked - remote is blocked
* bothBlocked - both local and remote are … | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.5 |
| v52UserPortRegOrLeaseUser User is a regular, permanent lease, or semi-permanent
leaseuser. Valid values are regular, permanentLease,
semiPermanentLease. Default is regular. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.2.6.1.6 |
| v52UserPortIsdnDsCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry Ds-type data, the value of
this variable should b… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.7 |
| v52UserPortIsdnPCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry p-type data, the value of
this variable should be… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.8 |
| v52UserPortIsdnFCPathId An ISDN user port can carry more than one type of the
Ds-type, p-type and f-type data. When this user port
is configured to carry f-type data, the value of
this variable should be… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.2.6.1.9 |