igSapi0T203
ZhoneGR303-MIB ·
.1.3.6.1.4.1.5504.4.3.1.2.1.8
Object
column
r/w
seconds Integer32
R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a remote
managing system and process assignment and
retrieval of the following LAPD parameters for
the purpose of remote provisioning the layer 2
connection:
d. Maximum layer 2 idle time before connection
verification is necessary (T203).
12.4.3.5.9 Timer T203
Timer T203 is used to time periods of inactivity
on a data link. When T203 expires, a supervisory
frame with the poll bit set to 1 is sent to
determine if the other side of the interface is
capable of sending and receiving frames. The
use of T203 is discussed in greater detail in
Section 12.6.3.3.
R12-19 [891] For all SAPS, the value of T203
shall be user selectable within the range of 10
to 300 seconds, inclusive, the step size shall
be 10 seconds, and the default value shall be
30 seconds.
Units in seconds.
Context
- MIB
- ZhoneGR303-MIB
- OID
.1.3.6.1.4.1.5504.4.3.1.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- igControlChannelEntry
- Table
- igControlChannelTable
- Siblings
- 15
Syntax
seconds Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igControlChannelTmcPrimarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.1 |
| igSapi1MaxOutstandingFrames Refer to igSapi0MaxOutstandingFrames
Not supported. | column | frames Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.10 |
| igSapi1N200 Refer to igSapi0N200
Not supported. | column | Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.11 |
| igSapi1T200 Refer to igSapi0T200 | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.12 |
| igSapi1T203 Refer to igSapi0T203 | column | seconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.13 |
| igSapi1PpsMode Refer to igSapi0PpsMode | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.14 |
| igControlChannelEocPrimarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.15 |
| igControlChannelEocSecondarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.17 |
| igControlChannelTmcSecondarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.2 |
| igControlChannelT303 Value of the T303 timer for the Q931 protocol
12.5.5.17.1 T303
T303 is the length of time that the IDT and RDT
will wait for a reply to a SETUP message.
… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.3 |
| igControlChannelT396 Value of the T396 timer for the Q931 protocol.
12.5.5.17.9 T396
T396 is the length of time that the RDT will
wait for a reply to a SETUP message following
the ini… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.4 |
| igSapi0MaxOutstandingFrames R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both the
active and standby data links, per IG), an RDT
and an IDT shall receive from a r… | column | frames Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.5 |
| igSapi0N200 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.6 |
| igSapi0T200 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.7 |
| igSapi0PpsMode DS1 protection switching option. Valid
values are inhibit, notInhibited and
notApplicable. Note that SAPI 0 and SAPI 1
(EOC-TMC) are not switched together.
6.2.1… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.9 |