igControlChannelTmcSecondarySvcState
ZhoneGR303-MIB ·
.1.3.6.1.4.1.5504.4.3.1.2.1.2
Object
column
Enumeration
Represents conditions that are currently present at the given entity and can affect the service state. Valid values are active, standby, outOfService.
Context
- MIB
- ZhoneGR303-MIB
- OID
.1.3.6.1.4.1.5504.4.3.1.2.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- igControlChannelEntry
- Table
- igControlChannelTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igControlChannelTmcPrimarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.1 |
| igSapi1MaxOutstandingFrames Refer to igSapi0MaxOutstandingFrames
Not supported. | column | frames Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.10 |
| igSapi1N200 Refer to igSapi0N200
Not supported. | column | Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.11 |
| igSapi1T200 Refer to igSapi0T200 | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.12 |
| igSapi1T203 Refer to igSapi0T203 | column | seconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.13 |
| igSapi1PpsMode Refer to igSapi0PpsMode | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.14 |
| igControlChannelEocPrimarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.15 |
| igControlChannelEocSecondarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.17 |
| igControlChannelT303 Value of the T303 timer for the Q931 protocol
12.5.5.17.1 T303
T303 is the length of time that the IDT and RDT
will wait for a reply to a SETUP message.
… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.3 |
| igControlChannelT396 Value of the T396 timer for the Q931 protocol.
12.5.5.17.9 T396
T396 is the length of time that the RDT will
wait for a reply to a SETUP message following
the ini… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.4 |
| igSapi0MaxOutstandingFrames R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both the
active and standby data links, per IG), an RDT
and an IDT shall receive from a r… | column | frames Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.5 |
| igSapi0N200 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.6 |
| igSapi0T200 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.7 |
| igSapi0T203 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | seconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.8 |
| igSapi0PpsMode DS1 protection switching option. Valid
values are inhibit, notInhibited and
notApplicable. Note that SAPI 0 and SAPI 1
(EOC-TMC) are not switched together.
6.2.1… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.9 |