igSapi0T200
ZhoneGR303-MIB ·
.1.3.6.1.4.1.5504.4.3.1.2.1.7
Object
column
r/w
milliseconds Integer32
R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a remote
managing system and process assignment and
retrieval of the following LAPD parameters for
the purpose of remote provisioning the layer 2
connection:
c. Maximum layer 2 wait time for an acknowledgment
of a transmitted frame (T200)
12.4.3.5.6 Timer T200
Timer T200 specifies the waiting period for
receipt of an acknowledgment of a transmitted
frame. A study of LAPD suggests that T200 should
be at least as great as the time required to
transmit three information frames. (See IEEE
Publication CH2175-8/85/0000-0121.) Therefore,
to protect against timeouts in an error-free
condition, the default value of T200 for each
SAP is sufficient to allow for the transmission
of at least three frames.
R12-18 [890] For all SAPs, the value of T200
shall be user selectable within the range of
100 ms to 350 ms, inclusive, the step size shall
be 50 ms, and the default value of T200 shall
be 150 ms.
Units in milliseconds.
Context
- MIB
- ZhoneGR303-MIB
- OID
.1.3.6.1.4.1.5504.4.3.1.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- igControlChannelEntry
- Table
- igControlChannelTable
- Siblings
- 15
Syntax
milliseconds Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igControlChannelTmcPrimarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.1 |
| igSapi1MaxOutstandingFrames Refer to igSapi0MaxOutstandingFrames
Not supported. | column | frames Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.10 |
| igSapi1N200 Refer to igSapi0N200
Not supported. | column | Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.11 |
| igSapi1T200 Refer to igSapi0T200 | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.12 |
| igSapi1T203 Refer to igSapi0T203 | column | seconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.13 |
| igSapi1PpsMode Refer to igSapi0PpsMode | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.14 |
| igControlChannelEocPrimarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.15 |
| igControlChannelEocSecondarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.17 |
| igControlChannelTmcSecondarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.2 |
| igControlChannelT303 Value of the T303 timer for the Q931 protocol
12.5.5.17.1 T303
T303 is the length of time that the IDT and RDT
will wait for a reply to a SETUP message.
… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.3 |
| igControlChannelT396 Value of the T396 timer for the Q931 protocol.
12.5.5.17.9 T396
T396 is the length of time that the RDT will
wait for a reply to a SETUP message following
the ini… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.4 |
| igSapi0MaxOutstandingFrames R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both the
active and standby data links, per IG), an RDT
and an IDT shall receive from a r… | column | frames Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.5 |
| igSapi0N200 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.6 |
| igSapi0T203 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | seconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.8 |
| igSapi0PpsMode DS1 protection switching option. Valid
values are inhibit, notInhibited and
notApplicable. Note that SAPI 0 and SAPI 1
(EOC-TMC) are not switched together.
6.2.1… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.9 |