igControlChannelT396
ZhoneGR303-MIB ·
.1.3.6.1.4.1.5504.4.3.1.2.1.4
Object
column
r/w
milliseconds Integer32
Value of the T396 timer for the Q931 protocol.
12.5.5.17.9 T396
T396 is the length of time that the RDT will
wait for a reply to a SETUP message following
the initial expiration of timer T303.
R12-459 [1328] The value of T396 shall be
provisionable from 700 ms through 14.7 seconds
in steps of 1 second; the default shall be 14.7
seconds.
R12-460 [1329] The above range is not intended
to define acceptable response-time performance
at the IDT, where the low-load (i.e., no other
external stimuli requiring call processing
activity) mean response time to a SETUP message
shall be no greater than 500 ms.
Units in milliseconds.
Context
- MIB
- ZhoneGR303-MIB
- OID
.1.3.6.1.4.1.5504.4.3.1.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- igControlChannelEntry
- Table
- igControlChannelTable
- Siblings
- 15
Syntax
milliseconds Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igControlChannelTmcPrimarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.1 |
| igSapi1MaxOutstandingFrames Refer to igSapi0MaxOutstandingFrames
Not supported. | column | frames Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.10 |
| igSapi1N200 Refer to igSapi0N200
Not supported. | column | Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.11 |
| igSapi1T200 Refer to igSapi0T200 | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.12 |
| igSapi1T203 Refer to igSapi0T203 | column | seconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.13 |
| igSapi1PpsMode Refer to igSapi0PpsMode | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.14 |
| igControlChannelEocPrimarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.15 |
| igControlChannelEocSecondarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.17 |
| igControlChannelTmcSecondarySvcState Represents conditions that are currently present
at the given entity and can affect the service
state. Valid values are active, standby, outOfService. | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.2 |
| igControlChannelT303 Value of the T303 timer for the Q931 protocol
12.5.5.17.1 T303
T303 is the length of time that the IDT and RDT
will wait for a reply to a SETUP message.
… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.3 |
| igSapi0MaxOutstandingFrames R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both the
active and standby data links, per IG), an RDT
and an IDT shall receive from a r… | column | frames Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.5 |
| igSapi0N200 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.6 |
| igSapi0T200 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.7 |
| igSapi0T203 R5-97 [339] For each data link service access
point (i.e., each SAPI=0 and SAPI=1, for both
the active and standby data links, per IG), an
RDT and an IDT shall receive from a r… | column | seconds Integer32 | .1.3.6.1.4.1.5504.4.3.1.2.1.8 |
| igSapi0PpsMode DS1 protection switching option. Valid
values are inhibit, notInhibited and
notApplicable. Note that SAPI 0 and SAPI 1
(EOC-TMC) are not switched together.
6.2.1… | column | Enumeration | .1.3.6.1.4.1.5504.4.3.1.2.1.9 |