zxAnXdsl2DIConfPrfRowStatus

ZTE-AN-XDSL2-MIBII · .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.80

MIB view Table view

Object

column r/w SNMPv2-TCRowStatus

This object is used to create a new row or to modify or
delete an existing row in this table.
              
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.

Context

MIB: ZTE-AN-XDSL2-MIBII
OID: .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.80
Type: column
Access: readwrite
Status: current
Parent: zxAnXdsl2DelayInpConfPrfEntry
Table: zxAnXdsl2DelayInpConfPrfTable
Siblings: 11

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
zxAnXdsl2DelayInpConfPrfName This object identifies a row in this table.	column	OctetString	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.1`
zxAnXdsl2ChConfMaxDelayVar Maximum delay variation (DVMAX). This optional VDSL2 specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is ranges from 1 to 254…	column	0.1 milliseconds Unsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.10`
zxAnXdsl2ChConfInitPolicy Channel Initialization Policy Selection (CIPOLICY). This optional parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initia…	column	VDSL2-LINE-TC-MIBXdsl2ChInitPolicy	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.11`
zxAnXdsl2ChConfMaxDelayDs Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The xTUs shall choose the S (factor) …	column	milliseconds Unsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.2`
zxAnXdsl2ChConfMaxDelayUs Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The xTUs shall choose the S (factor) and D…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.3`
zxAnXdsl2ChConfMinProtectDs Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following…	column	symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.4`
zxAnXdsl2ChConfMinProtectUs Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols.	column	symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.5`
zxAnXdsl2ChConfMinProtect8Ds (INPMIN8ds). This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The…	column	symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.6`
zxAnXdsl2ChConfMinProtect8Us (INPMIN8us). This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The…	column	symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.7`
zxAnXdsl2ChConfForceInpDs Enable /disable force to use INP.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.8`
zxAnXdsl2ChConfForceInpUs Enable /disable force to use INP.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.9`