zxAnXdsl2ChConfMinProtect8Us

ZTE-AN-XDSL2-MIBII · .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.7
MIB view Table view

Object

column r/w symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8 
(INPMIN8us).
This parameter specifies the minimum impulse noise protection
for the bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 8.625 kHz. The impulse noise
protection is expressed in DMT symbols with a subcarrier
spacing of 8.625 kHz and can take any integer value from
0 to 16, inclusive.

Context

MIB
ZTE-AN-XDSL2-MIBII
OID
.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.7
Type
column
Access
readwrite
Status
current
Units
symbols
Parent
zxAnXdsl2DelayInpConfPrfEntry
Table
zxAnXdsl2DelayInpConfPrfTable
Siblings
11

Syntax

symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8
Source
VDSL2-LINE-TC-MIBXdsl2SymbolProtection8
Base type
Enumeration

Values & Constraints

Type Values
1noProtection
2singleSymbol
3twoSymbols
4threeSymbols
5fourSymbols
6fiveSymbols
7sixSymbols
8sevenSymbols
9eightSymbols
10nineSymbols
11tenSymbols
12elevenSymbols
13twelveSymbols
14thirteeSymbols
15fourteenSymbols
16fifteenSymbols
17sixteenSymbols

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxAnXdsl2DelayInpConfPrfName
This object identifies a row in this table.
columnOctetString.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.1
zxAnXdsl2ChConfMaxDelayVar
Maximum delay variation (DVMAX). This optional VDSL2 specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is ranges from 1 to 254…
column0.1 milliseconds Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.10
zxAnXdsl2ChConfInitPolicy
Channel Initialization Policy Selection (CIPOLICY). This optional parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initia…
columnVDSL2-LINE-TC-MIBXdsl2ChInitPolicy.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.11
zxAnXdsl2ChConfMaxDelayDs
Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The xTUs shall choose the S (factor) …
columnmilliseconds Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.2
zxAnXdsl2ChConfMaxDelayUs
Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The xTUs shall choose the S (factor) and D…
columnmilliseconds Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.3
zxAnXdsl2ChConfMinProtectDs
Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following…
columnsymbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.4
zxAnXdsl2ChConfMinProtectUs
Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols.
columnsymbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.5
zxAnXdsl2ChConfMinProtect8Ds
(INPMIN8ds). This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The…
columnsymbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.6
zxAnXdsl2ChConfForceInpDs
Enable /disable force to use INP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.8
zxAnXdsl2DIConfPrfRowStatus
This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'activ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.80
zxAnXdsl2ChConfForceInpUs
Enable /disable force to use INP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.9