zxAnXdsl2ChConfMaxDelayUs
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.3
Object
column
r/w
milliseconds Unsigned32
Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The xTUs shall choose the S (factor) and D (depth) values such that the actual one-way interleaving delay (zxAnXdsl2Ch1StatusActDelay) is as close as possible to, but less than or equal to zxAnXdsl2Ch1ConfPrfMaxDelayUs. The delay is coded in ms, with the value 0 indicating no delay bound is being imposed.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- zxAnXdsl2DelayInpConfPrfEntry
- Table
- zxAnXdsl2DelayInpConfPrfTable
- Siblings
- 11
Syntax
milliseconds Unsigned32
Values & Constraints
Object Constraints
range: 0-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2DelayInpConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.1 |
| zxAnXdsl2ChConfMaxDelayVar Maximum delay variation (DVMAX).
This optional VDSL2 specific parameter specifies the maximum
value for the delay variation allowed in an OLR procedure.
It is ranges from 1 to 254… | column | 0.1 milliseconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.10 |
| zxAnXdsl2ChConfInitPolicy Channel Initialization Policy Selection (CIPOLICY).
This optional parameter indicates which policy shall be applied
to determine the transceiver configuration parameters at
initia… | column | VDSL2-LINE-TC-MIBXdsl2ChInitPolicy | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.11 |
| zxAnXdsl2ChConfMaxDelayDs Maximum Interleave Delay on Downstream direction. The
maximum one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)
… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.2 |
| zxAnXdsl2ChConfMinProtectDs Minimum Impulse Noise Protection on Downstream direction.
The minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.4 |
| zxAnXdsl2ChConfMinProtectUs Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.5 |
| zxAnXdsl2ChConfMinProtect8Ds (INPMIN8ds).
This parameter specifies the minimum impulse noise protection
for the bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 8.625 kHz. The… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8 | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.6 |
| zxAnXdsl2ChConfMinProtect8Us (INPMIN8us).
This parameter specifies the minimum impulse noise protection
for the bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 8.625 kHz. The… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8 | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.7 |
| zxAnXdsl2ChConfForceInpDs Enable /disable force to use INP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.8 |
| zxAnXdsl2DIConfPrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.80 |
| zxAnXdsl2ChConfForceInpUs Enable /disable force to use INP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.9 |