zxAnXdsl2ChConfMaxDelayVar
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.10
Object
column
r/w
0.1 milliseconds Unsigned32
Maximum delay variation (DVMAX). This optional VDSL2 specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is ranges from 1 to 254 units of 0.1 milliseconds (i.e., 0.1 to 25.4 milliseconds) with the special value 255 which indicates that no delay variation bound is imposed.
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.1 milliseconds
- Parent
- zxAnXdsl2DelayInpConfPrfEntry
- Table
- zxAnXdsl2DelayInpConfPrfTable
- Siblings
- 11
Syntax
0.1 milliseconds Unsigned32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2DelayInpConfPrfName This object identifies a row in this table. | column | OctetString | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.1 |
| zxAnXdsl2ChConfInitPolicy Channel Initialization Policy Selection (CIPOLICY).
This optional parameter indicates which policy shall be applied
to determine the transceiver configuration parameters at
initia… | column | VDSL2-LINE-TC-MIBXdsl2ChInitPolicy | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.11 |
| zxAnXdsl2ChConfMaxDelayDs Maximum Interleave Delay on Downstream direction. The
maximum one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The xTUs shall choose the S (factor)
… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.2 |
| zxAnXdsl2ChConfMaxDelayUs Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The xTUs shall choose the S (factor) and
D… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.3 |
| zxAnXdsl2ChConfMinProtectDs Minimum Impulse Noise Protection on Downstream direction.
The minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.4 |
| zxAnXdsl2ChConfMinProtectUs Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.5 |
| zxAnXdsl2ChConfMinProtect8Ds (INPMIN8ds).
This parameter specifies the minimum impulse noise protection
for the bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 8.625 kHz. The… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8 | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.6 |
| zxAnXdsl2ChConfMinProtect8Us (INPMIN8us).
This parameter specifies the minimum impulse noise protection
for the bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 8.625 kHz. The… | column | symbols VDSL2-LINE-TC-MIBXdsl2SymbolProtection8 | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.7 |
| zxAnXdsl2ChConfForceInpDs Enable /disable force to use INP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.8 |
| zxAnXdsl2DIConfPrfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.80 |
| zxAnXdsl2ChConfForceInpUs Enable /disable force to use INP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1001.1.3.16.1.9 |