cardPweTimingMode

ZHONE-CARD-RESOURCES-MIB · .1.3.6.1.4.1.5504.3.3.1.1.19

Object

column r/w Enumeration

Describes PWE timing origin and mode of timing recovery:
              
none    - no reference clock required, or PWE not
          supported.
              
source-differential - the local Provider Edge (PE) device
          supplies the reference signal for differential
          recovery.
              
source-adaptive - the local PE device participates in
          the adaptive clock recovery scheme.
              
remote-differential - the remote PE device supplies
          the reference signal for differential
          recovery.
              
remote-adaptive - the local PE device participates in
          the adaptive clock recovery scheme.

Context

MIB: ZHONE-CARD-RESOURCES-MIB
OID: .1.3.6.1.4.1.5504.3.3.1.1.19
Type: column
Access: readwrite
Status: current
Parent: cardResourceEntry
Table: cardResourceTable
Siblings: 18

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	none
`2`	source-differential
`3`	source-adaptive
`4`	remote-differential
`5`	remote-adaptive

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cardIdentification Textual description of the unit/card or access device type.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.1`
cardAdminStatsEnable Enable the collection and forwarding of historical statistics on the unit/card. The default value is disabled. Note this value should be logically 'anded' with the…	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.10`
cardUpTime The amount of time since this unit/card was last initialized (warm or full reset). The units are in 100ths of a second.	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.5504.3.3.1.1.11`
cardProcessorType A string is returned that describes the processor type used on the unit/card.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.12`
cardPortStatus Summary of the status of all physical ports on the unit/card. Each port is identified by it's ifTable index and the status is indicated as up\|down\|unknown.	column	OctetString	`.1.3.6.1.4.1.5504.3.3.1.1.13`
cardInterfaceType This field is used to identify which interface types are s upported for a given card. In the case where a card has exactly one possible interface (such as the ethernet card) …	column	Zhone-TCZhoneCardType	`.1.3.6.1.4.1.5504.3.3.1.1.14`
cardAtmManualAal2bw This field is used to configure the resources for AAL2 for both high and low priority interfaces as the percentage of total available resources. Remainder of the resources would…	column	Integer32	`.1.3.6.1.4.1.5504.3.3.1.1.15`
cardAtmManualAal2h This field is used to configure the resources for high priorty AAL2 interface as the percentage of total bandwidth allocated for AAL2. This field will be used if cardAtmConfigur…	column	Integer32	`.1.3.6.1.4.1.5504.3.3.1.1.16`
cardLineVoltage deprecated DEPRECATED - use zhoneSysCardLineVoltage Specifies the voltage supplied to all lines(ports) of this card. Used on ISDN line cards.	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.17`
cardVpiVciRange deprecated DEPRECATED - use zhoneSysCardVpiVciRange. The maximum vpi and vci values that may be used for this card.	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.18`
cardZhoneType The numerical representation of what unit/card type is present.	column	Zhone-TCZhoneCardType	`.1.3.6.1.4.1.5504.3.3.1.1.2`
cardMfgSerialNumber The manufacturing serial number for this unit/card.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.3`
cardMfgCLEICode CLEI code for the unit/card if defined, otherwise the value will be set to zero (0) by the card.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.4`
cardMfgRevisionCode Manufacturing hardware revision code for the unit/card.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.5`
cardMfgBootRevision Revision level of any permenant (PROM) or semi- permenant (flash) code on the unit/card. This code is generally used as a bootstrap loader.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.6`
cardPostResults Results string generated by unit/card that displays the results of the POST (power-on-self-test). The first item in the text string indicates the overall results of the test. 'P…	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.7`
cardAdminStatus Specifies the adminstrative status of the unit/card as follows: operational: the unit/card enters the operational state if able. In the operational state the uni…	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.8`
cardOperStatus Indicates the operational status of the unit/card as follows: unknown: the card is in an unknown or error state operating: software has been loaded a…	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.9`