cardIdentification
ZHONE-CARD-RESOURCES-MIB ·
.1.3.6.1.4.1.5504.3.3.1.1.1
Object
column
Zhone-TCZhoneAdminString
Textual description of the unit/card or access device type.
Context
- MIB
- ZHONE-CARD-RESOURCES-MIB
- OID
.1.3.6.1.4.1.5504.3.3.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cardResourceEntry
- Table
- cardResourceTable
- Siblings
- 18
Values & Constraints
Type Constraints
range: 0..32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cardAdminStatsEnable Enable the collection and forwarding of historical
statistics on the unit/card. The default value is
disabled.
Note this value should be logically 'anded' with the… | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.10 |
| cardUpTime The amount of time since this unit/card was last
initialized (warm or full reset). The units are in
100ths of a second. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.5504.3.3.1.1.11 |
| cardProcessorType A string is returned that describes the processor type
used on the unit/card. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.12 |
| cardPortStatus Summary of the status of all physical ports on the
unit/card. Each port is identified by it's ifTable
index and the status is indicated as up|down|unknown. | column | OctetString | .1.3.6.1.4.1.5504.3.3.1.1.13 |
| cardInterfaceType This field is used to identify which interface types are s
upported for a given card. In the case where a card has
exactly one possible interface (such as the ethernet card)
… | column | Zhone-TCZhoneCardType | .1.3.6.1.4.1.5504.3.3.1.1.14 |
| cardAtmManualAal2bw This field is used to configure the resources for AAL2
for both high and low priority interfaces as the
percentage of total available resources. Remainder
of the resources would… | column | Integer32 | .1.3.6.1.4.1.5504.3.3.1.1.15 |
| cardAtmManualAal2h This field is used to configure the resources for
high priorty AAL2 interface as the percentage of total
bandwidth allocated for AAL2. This field will be used if
cardAtmConfigur… | column | Integer32 | .1.3.6.1.4.1.5504.3.3.1.1.16 |
| cardLineVoltage deprecated DEPRECATED - use zhoneSysCardLineVoltage
Specifies the voltage supplied to all lines(ports) of
this card.
Used on ISDN line cards. | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.17 |
| cardVpiVciRange deprecated DEPRECATED - use zhoneSysCardVpiVciRange.
The maximum vpi and vci values that may be used for this card. | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.18 |
| cardPweTimingMode Describes PWE timing origin and mode of timing recovery:
none - no reference clock required, or PWE not
supported.
source-differential -… | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.19 |
| cardZhoneType The numerical representation of what unit/card type
is present. | column | Zhone-TCZhoneCardType | .1.3.6.1.4.1.5504.3.3.1.1.2 |
| cardMfgSerialNumber The manufacturing serial number for this unit/card. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.3 |
| cardMfgCLEICode CLEI code for the unit/card if defined, otherwise the
value will be set to zero (0) by the card. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.4 |
| cardMfgRevisionCode Manufacturing hardware revision code for the unit/card. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.5 |
| cardMfgBootRevision Revision level of any permenant (PROM) or semi-
permenant (flash) code on the unit/card. This code
is generally used as a bootstrap loader. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.6 |
| cardPostResults Results string generated by unit/card that displays
the results of the POST (power-on-self-test). The
first item in the text string indicates the overall
results of the test. 'P… | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.7 |
| cardAdminStatus Specifies the adminstrative status of the unit/card
as follows:
operational: the unit/card enters the operational
state if able. In the operational state the
uni… | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.8 |
| cardOperStatus Indicates the operational status of the unit/card as
follows:
unknown: the card is in an unknown or error state
operating: software has been loaded a… | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.9 |