cardAtmManualAal2bw

ZHONE-CARD-RESOURCES-MIB · .1.3.6.1.4.1.5504.3.3.1.1.15

MIB view Table view

Object

column r/w Integer32

This field is used to configure the resources for AAL2
for both high and low priority interfaces as the 
percentage of total available resources. Remainder 
of the resources would be used for AAL5.This field 
will be used if cardAtmConfiguration is entered 
as manual. 
This variable is not supported in this release.

Context

MIB: ZHONE-CARD-RESOURCES-MIB
OID: .1.3.6.1.4.1.5504.3.3.1.1.15
Type: column
Access: readwrite
Status: current
Parent: cardResourceEntry
Table: cardResourceTable
Siblings: 18

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-100

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cardIdentification Textual description of the unit/card or access device type.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.1`
cardAdminStatsEnable Enable the collection and forwarding of historical statistics on the unit/card. The default value is disabled. Note this value should be logically 'anded' with the…	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.10`
cardUpTime The amount of time since this unit/card was last initialized (warm or full reset). The units are in 100ths of a second.	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.5504.3.3.1.1.11`
cardProcessorType A string is returned that describes the processor type used on the unit/card.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.12`
cardPortStatus Summary of the status of all physical ports on the unit/card. Each port is identified by it's ifTable index and the status is indicated as up\|down\|unknown.	column	OctetString	`.1.3.6.1.4.1.5504.3.3.1.1.13`
cardInterfaceType This field is used to identify which interface types are s upported for a given card. In the case where a card has exactly one possible interface (such as the ethernet card) …	column	Zhone-TCZhoneCardType	`.1.3.6.1.4.1.5504.3.3.1.1.14`
cardAtmManualAal2h This field is used to configure the resources for high priorty AAL2 interface as the percentage of total bandwidth allocated for AAL2. This field will be used if cardAtmConfigur…	column	Integer32	`.1.3.6.1.4.1.5504.3.3.1.1.16`
cardLineVoltage deprecated DEPRECATED - use zhoneSysCardLineVoltage Specifies the voltage supplied to all lines(ports) of this card. Used on ISDN line cards.	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.17`
cardVpiVciRange deprecated DEPRECATED - use zhoneSysCardVpiVciRange. The maximum vpi and vci values that may be used for this card.	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.18`
cardPweTimingMode Describes PWE timing origin and mode of timing recovery: none - no reference clock required, or PWE not supported. source-differential -…	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.19`
cardZhoneType The numerical representation of what unit/card type is present.	column	Zhone-TCZhoneCardType	`.1.3.6.1.4.1.5504.3.3.1.1.2`
cardMfgSerialNumber The manufacturing serial number for this unit/card.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.3`
cardMfgCLEICode CLEI code for the unit/card if defined, otherwise the value will be set to zero (0) by the card.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.4`
cardMfgRevisionCode Manufacturing hardware revision code for the unit/card.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.5`
cardMfgBootRevision Revision level of any permenant (PROM) or semi- permenant (flash) code on the unit/card. This code is generally used as a bootstrap loader.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.6`
cardPostResults Results string generated by unit/card that displays the results of the POST (power-on-self-test). The first item in the text string indicates the overall results of the test. 'P…	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.3.1.1.7`
cardAdminStatus Specifies the adminstrative status of the unit/card as follows: operational: the unit/card enters the operational state if able. In the operational state the uni…	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.8`
cardOperStatus Indicates the operational status of the unit/card as follows: unknown: the card is in an unknown or error state operating: software has been loaded a…	column	Enumeration	`.1.3.6.1.4.1.5504.3.3.1.1.9`