cardAdminStatsEnable
ZHONE-CARD-RESOURCES-MIB ·
.1.3.6.1.4.1.5504.3.3.1.1.10
Object
column
r/w
Enumeration
Enable the collection and forwarding of historical
statistics on the unit/card. The default value is
disabled.
Note this value should be logically 'anded' with the
the system statistics enbale to determine if the
collection and forwarding of statistics should
actually be enabled.
Default value is 'disabled'.
Context
- MIB
- ZHONE-CARD-RESOURCES-MIB
- OID
.1.3.6.1.4.1.5504.3.3.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cardResourceEntry
- Table
- cardResourceTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cardIdentification Textual description of the unit/card or access device
type. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.1 |
| cardUpTime The amount of time since this unit/card was last
initialized (warm or full reset). The units are in
100ths of a second. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.5504.3.3.1.1.11 |
| cardProcessorType A string is returned that describes the processor type
used on the unit/card. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.12 |
| cardPortStatus Summary of the status of all physical ports on the
unit/card. Each port is identified by it's ifTable
index and the status is indicated as up|down|unknown. | column | OctetString | .1.3.6.1.4.1.5504.3.3.1.1.13 |
| cardInterfaceType This field is used to identify which interface types are s
upported for a given card. In the case where a card has
exactly one possible interface (such as the ethernet card)
… | column | Zhone-TCZhoneCardType | .1.3.6.1.4.1.5504.3.3.1.1.14 |
| cardAtmManualAal2bw This field is used to configure the resources for AAL2
for both high and low priority interfaces as the
percentage of total available resources. Remainder
of the resources would… | column | Integer32 | .1.3.6.1.4.1.5504.3.3.1.1.15 |
| cardAtmManualAal2h This field is used to configure the resources for
high priorty AAL2 interface as the percentage of total
bandwidth allocated for AAL2. This field will be used if
cardAtmConfigur… | column | Integer32 | .1.3.6.1.4.1.5504.3.3.1.1.16 |
| cardLineVoltage deprecated DEPRECATED - use zhoneSysCardLineVoltage
Specifies the voltage supplied to all lines(ports) of
this card.
Used on ISDN line cards. | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.17 |
| cardVpiVciRange deprecated DEPRECATED - use zhoneSysCardVpiVciRange.
The maximum vpi and vci values that may be used for this card. | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.18 |
| cardPweTimingMode Describes PWE timing origin and mode of timing recovery:
none - no reference clock required, or PWE not
supported.
source-differential -… | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.19 |
| cardZhoneType The numerical representation of what unit/card type
is present. | column | Zhone-TCZhoneCardType | .1.3.6.1.4.1.5504.3.3.1.1.2 |
| cardMfgSerialNumber The manufacturing serial number for this unit/card. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.3 |
| cardMfgCLEICode CLEI code for the unit/card if defined, otherwise the
value will be set to zero (0) by the card. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.4 |
| cardMfgRevisionCode Manufacturing hardware revision code for the unit/card. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.5 |
| cardMfgBootRevision Revision level of any permenant (PROM) or semi-
permenant (flash) code on the unit/card. This code
is generally used as a bootstrap loader. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.6 |
| cardPostResults Results string generated by unit/card that displays
the results of the POST (power-on-self-test). The
first item in the text string indicates the overall
results of the test. 'P… | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.3.1.1.7 |
| cardAdminStatus Specifies the adminstrative status of the unit/card
as follows:
operational: the unit/card enters the operational
state if able. In the operational state the
uni… | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.8 |
| cardOperStatus Indicates the operational status of the unit/card as
follows:
unknown: the card is in an unknown or error state
operating: software has been loaded a… | column | Enumeration | .1.3.6.1.4.1.5504.3.3.1.1.9 |