tnPortOtdrScanState

TROPIC-OPTICALPORT-MIB · .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.17
MIB view Table view

Object

column Enumeration 
Displays the state of the OTDR to which this port is
connected:
  running:  The OTDR is currently performing an OTDR
            trace on the selected port.
  pending:  The OTDR is pending underlying resources
            being available.
  complete: The OTDR trace has completed.

Context

MIB
TROPIC-OPTICALPORT-MIB
OID
.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.17
Type
column
Access
readonly
Status
current
Parent
tnPortOtdrScanEntry
Table
tnPortOtdrScanTable
Siblings
19

Syntax

Enumeration

Values & Constraints

Enumerated Values
1running
2pending
3complete
4notApplicable
5abort

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tnPortOtdrScanProfileId
Profile Id to be used for the scan. Current configurable range: 1 to 16. After selecting a profile Id, if user tries to change any of the parameter, …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.1
tnPortOtdrScanControl
Different states of scan.
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.10
tnPortOtdrScanStatus
Current Scan status. available: Available for use. busy: Scan is already running on the connected OTDR.
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.11
tnPortOtdrScanResult
Most recent scan Results for the LD Port. noScan: No scan result is available. fail: Last scan failed. inprogress: Last scan not completed yet. abort: …
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.12
tnPortOtdrScanTimeRemaining
Time remaining for scan to complete. It should not exceed maximum scan time (300 seconds).
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.13
tnPortOtdrScanLastSuccessfulTimeStamp
The date and time when the last OTDR scan was successful.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.14
tnPortOtdrScanEventThreshold
Otdr Scan Event Threshold.
columndB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.15
tnPortOtdrScanIOR
.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.16
tnPortOtdrScanErrorType
Error Type Category: unknown : Error that causes the scan to be rejected alreadyIssued : Scan is already in progress on the port hardwareFailed: Card failure.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.18
tnPortOtdrScanErrorDetail
.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.19
tnPortOtdrScanDescription
Describes the different settings for the scan.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.2
tnPortOtdrScanRequestTimeStamp
The date and time when the OTDR scan was launched.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.20
tnPortOtdrScanWaveLength
The wavelength used for the OTDR scan. The wavelength is 1610 nm, and is not configurable.
columnnanometers SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.3
tnPortOtdrScanPulseLength
Pulse length. Current configurable values: 5, 10, 30, 100, 300, 1000, 3000, 10000, and 20000.
columnnanoseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.4
tnPortOtdrScanRange
The range of the span that is being probed in meters. Current configurable values: 100, 500, 1000, 2000, 5000, 10000, 20000, 40000,80000, and 260000.
columnmeters SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.5
tnPortOtdrScanResolution
Distance resolution of the OTDR scan. Current configurable values are 4, 8, 16, 32, 64, 120, 250, 500, 1000, 2000, 4000, 8000 and 16000 centimeters.
columncentimeters SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.6
tnPortOtdrScanAvgTime
Signal averaging time for a scan. Current configurable range: 5 to 300.
columnseconds Unsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.7
tnPortOtdrScanConnAddress
Specifies the assigned OTDR port that is connected to the LD port.
columnInteger32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.8
tnPortOtdrScanFileName
Name of the file to be used for scan. If not provided, last filename will be used. The filename needs to be alphanumeric.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.9