tnPortOtdrScanResolution

TROPIC-OPTICALPORT-MIB · .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.6

MIB view Table view

Object

column r/w centimeters SNMPv2-SMIUnsigned32

Distance resolution of the OTDR scan.
              
Current configurable values are 4, 8, 16,
32, 64, 120, 250, 500, 1000, 2000, 4000,
8000 and 16000 centimeters.

Context

MIB: TROPIC-OPTICALPORT-MIB
OID: .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.6
Type: column
Access: readwrite
Status: current
Units: centimeters
Parent: tnPortOtdrScanEntry
Table: tnPortOtdrScanTable
Siblings: 19

Syntax

centimeters SNMPv2-SMIUnsigned32

Source: SNMPv2-SMIUnsigned32
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tnPortOtdrScanProfileId Profile Id to be used for the scan. Current configurable range: 1 to 16. After selecting a profile Id, if user tries to change any of the parameter, …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.1`
tnPortOtdrScanControl Different states of scan.	column	Enumeration	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.10`
tnPortOtdrScanStatus Current Scan status. available: Available for use. busy: Scan is already running on the connected OTDR.	column	Enumeration	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.11`
tnPortOtdrScanResult Most recent scan Results for the LD Port. noScan: No scan result is available. fail: Last scan failed. inprogress: Last scan not completed yet. abort: …	column	Enumeration	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.12`
tnPortOtdrScanTimeRemaining Time remaining for scan to complete. It should not exceed maximum scan time (300 seconds).	column	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.13`
tnPortOtdrScanLastSuccessfulTimeStamp The date and time when the last OTDR scan was successful.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.14`
tnPortOtdrScanEventThreshold Otdr Scan Event Threshold.	column	dB SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.15`
tnPortOtdrScanIOR .	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.16`
tnPortOtdrScanState Displays the state of the OTDR to which this port is connected: running: The OTDR is currently performing an OTDR trace on the selected port. pending: The OTDR i…	column	Enumeration	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.17`
tnPortOtdrScanErrorType Error Type Category: unknown : Error that causes the scan to be rejected alreadyIssued : Scan is already in progress on the port hardwareFailed: Card failure.	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.18`
tnPortOtdrScanErrorDetail .	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.19`
tnPortOtdrScanDescription Describes the different settings for the scan.	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.2`
tnPortOtdrScanRequestTimeStamp The date and time when the OTDR scan was launched.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.20`
tnPortOtdrScanWaveLength The wavelength used for the OTDR scan. The wavelength is 1610 nm, and is not configurable.	column	nanometers SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.3`
tnPortOtdrScanPulseLength Pulse length. Current configurable values: 5, 10, 30, 100, 300, 1000, 3000, 10000, and 20000.	column	nanoseconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.4`
tnPortOtdrScanRange The range of the span that is being probed in meters. Current configurable values: 100, 500, 1000, 2000, 5000, 10000, 20000, 40000,80000, and 260000.	column	meters SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.5`
tnPortOtdrScanAvgTime Signal averaging time for a scan. Current configurable range: 5 to 300.	column	seconds Unsigned32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.7`
tnPortOtdrScanConnAddress Specifies the assigned OTDR port that is connected to the LD port.	column	Integer32	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.8`
tnPortOtdrScanFileName Name of the file to be used for scan. If not provided, last filename will be used. The filename needs to be alphanumeric.	column	OctetString	`.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.9`