tnPortOtdrScanDescription
TROPIC-OPTICALPORT-MIB ·
.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.2
Object
column
r/w
OctetString
Describes the different settings for the scan.
Context
- MIB
- TROPIC-OPTICALPORT-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnPortOtdrScanEntry
- Table
- tnPortOtdrScanTable
- Siblings
- 19
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnPortOtdrScanProfileId Profile Id to be used for the scan.
Current configurable range: 1 to 16.
After selecting a profile Id, if user tries to
change any of the parameter, … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.1 |
| tnPortOtdrScanControl Different states of scan. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.10 |
| tnPortOtdrScanStatus Current Scan status.
available: Available for use.
busy: Scan is already running on the connected OTDR. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.11 |
| tnPortOtdrScanResult Most recent scan Results for the LD Port.
noScan: No scan result is available.
fail: Last scan failed.
inprogress: Last scan not completed yet.
abort: … | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.12 |
| tnPortOtdrScanTimeRemaining Time remaining for scan to complete. It should not
exceed maximum scan time (300 seconds). | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.13 |
| tnPortOtdrScanLastSuccessfulTimeStamp The date and time when the last OTDR scan was successful. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.14 |
| tnPortOtdrScanEventThreshold Otdr Scan Event Threshold. | column | dB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.15 |
| tnPortOtdrScanIOR . | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.16 |
| tnPortOtdrScanState Displays the state of the OTDR to which this port is
connected:
running: The OTDR is currently performing an OTDR
trace on the selected port.
pending: The OTDR i… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.17 |
| tnPortOtdrScanErrorType Error Type Category:
unknown : Error that causes the scan to be rejected
alreadyIssued : Scan is already in progress on the port
hardwareFailed: Card failure. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.18 |
| tnPortOtdrScanErrorDetail . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.19 |
| tnPortOtdrScanRequestTimeStamp The date and time when the OTDR scan was launched. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.20 |
| tnPortOtdrScanWaveLength The wavelength used for the OTDR scan. The
wavelength is 1610 nm, and is not configurable. | column | nanometers SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.3 |
| tnPortOtdrScanPulseLength Pulse length.
Current configurable values: 5, 10, 30, 100,
300, 1000, 3000, 10000, and 20000. | column | nanoseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.4 |
| tnPortOtdrScanRange The range of the span that is being probed
in meters.
Current configurable values: 100, 500, 1000, 2000,
5000, 10000, 20000, 40000,80000, and 260000. | column | meters SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.5 |
| tnPortOtdrScanResolution Distance resolution of the OTDR scan.
Current configurable values are 4, 8, 16,
32, 64, 120, 250, 500, 1000, 2000, 4000,
8000 and 16000 centimeters. | column | centimeters SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.6 |
| tnPortOtdrScanAvgTime Signal averaging time for a scan.
Current configurable range: 5 to 300. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.7 |
| tnPortOtdrScanConnAddress Specifies the assigned OTDR port that is connected to
the LD port. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.8 |
| tnPortOtdrScanFileName Name of the file to be used for scan. If not provided,
last filename will be used. The filename needs to be
alphanumeric. | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.9 |