tnPortOtdrScanConnAddress

TROPIC-OPTICALPORT-MIB · .1.3.6.1.4.1.7483.2.2.4.3.2.47.1.8
MIB view Table view

Object

column Integer32 
Specifies the assigned OTDR port that is connected to
the LD port.

Context

MIB
TROPIC-OPTICALPORT-MIB
OID
.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.8
Type
column
Access
readonly
Status
current
Parent
tnPortOtdrScanEntry
Table
tnPortOtdrScanTable
Siblings
19

Syntax

Integer32

Values & Constraints

Object Constraints
range: -1-2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tnPortOtdrScanProfileId
Profile Id to be used for the scan. Current configurable range: 1 to 16. After selecting a profile Id, if user tries to change any of the parameter, …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.1
tnPortOtdrScanControl
Different states of scan.
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.10
tnPortOtdrScanStatus
Current Scan status. available: Available for use. busy: Scan is already running on the connected OTDR.
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.11
tnPortOtdrScanResult
Most recent scan Results for the LD Port. noScan: No scan result is available. fail: Last scan failed. inprogress: Last scan not completed yet. abort: …
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.12
tnPortOtdrScanTimeRemaining
Time remaining for scan to complete. It should not exceed maximum scan time (300 seconds).
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.13
tnPortOtdrScanLastSuccessfulTimeStamp
The date and time when the last OTDR scan was successful.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.14
tnPortOtdrScanEventThreshold
Otdr Scan Event Threshold.
columndB SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.15
tnPortOtdrScanIOR
.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.16
tnPortOtdrScanState
Displays the state of the OTDR to which this port is connected: running: The OTDR is currently performing an OTDR trace on the selected port. pending: The OTDR i…
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.17
tnPortOtdrScanErrorType
Error Type Category: unknown : Error that causes the scan to be rejected alreadyIssued : Scan is already in progress on the port hardwareFailed: Card failure.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.18
tnPortOtdrScanErrorDetail
.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.19
tnPortOtdrScanDescription
Describes the different settings for the scan.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.2
tnPortOtdrScanRequestTimeStamp
The date and time when the OTDR scan was launched.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.20
tnPortOtdrScanWaveLength
The wavelength used for the OTDR scan. The wavelength is 1610 nm, and is not configurable.
columnnanometers SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.3
tnPortOtdrScanPulseLength
Pulse length. Current configurable values: 5, 10, 30, 100, 300, 1000, 3000, 10000, and 20000.
columnnanoseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.4
tnPortOtdrScanRange
The range of the span that is being probed in meters. Current configurable values: 100, 500, 1000, 2000, 5000, 10000, 20000, 40000,80000, and 260000.
columnmeters SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.5
tnPortOtdrScanResolution
Distance resolution of the OTDR scan. Current configurable values are 4, 8, 16, 32, 64, 120, 250, 500, 1000, 2000, 4000, 8000 and 16000 centimeters.
columncentimeters SNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.6
tnPortOtdrScanAvgTime
Signal averaging time for a scan. Current configurable range: 5 to 300.
columnseconds Unsigned32.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.7
tnPortOtdrScanFileName
Name of the file to be used for scan. If not provided, last filename will be used. The filename needs to be alphanumeric.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.3.2.47.1.9