tlpUpsConfigEconomicMode

TRIPPLITE-PRODUCTS · .1.3.6.1.4.1.850.1.1.3.1.5.1.1.15

Object

column r/w Enumeration

The configurable economic mode options for the ups. The online(0) mode is
the default configuration of most upss, which is synonymous as having the
economic mode disabled. The economy(1) mode is the typical configuration to
run in economy mode, which is synonymous as having the economic mode enabled.
Constant50Hz(2) is a power strategy, which fixes the output frequency at 50Hz.
Constant60Hz(3) is a power strategy, which fixes the output frequency at 60Hz.
ConstantAuto(4) regulates the output frequency at nominal input frequency.
AutoAdaptive(5) mode will cause the ups to automatically switch between
online(0), maximum quality, and economy(1), maximum efficiency, to improve
efficiency during stable utility periods and improve output regulation during
unstable utility periods. Not all values are supported by all upss. Most upss,
if supportive of economic mode, only supports online(0) and economy(1). If the
ups does not support economic mode, then this value will always return
ERROR_NO_SUCH_NAME.

Context

MIB: TRIPPLITE-PRODUCTS
OID: .1.3.6.1.4.1.850.1.1.3.1.5.1.1.15
Type: column
Access: readwrite
Status: current
Parent: tlpUpsConfigEntry
Table: tlpUpsConfigTable
Siblings: 17

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	online
`1`	economy
`2`	constant50Hz
`3`	constant60Hz
`4`	constantAuto
`5`	autoAdaptive

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tlpUpsConfigInputVoltage The nominal value of the input line voltage. This value may not be supported on all models. If not supported, this value will return ERROR_NO_SUCH_NAME. This value may not be writ…	column	Volts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.1`
tlpUpsConfigBypassLowerLimitPercent The lowest AC input voltage allowed to be output to the load while in bypass mode. This setting is expressed as a percentage from nominal voltage. If this value is not supported b…	column	percent Integer32	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.10`
tlpUpsConfigBypassUpperLimitPercent The highest AC input voltage allowed to be output to the load while in bypass mode. This setting is expressed as a percentage from nominal voltage. If this value is not supported …	column	percent Integer32	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.11`
tlpUpsConfigBypassLowerLimitVoltage The lowest AC input voltage allowed to be output to the load while in bypass mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.	column	Volts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.12`
tlpUpsConfigBypassUpperLimitVoltage The highest AC input voltage allowed to be output to the load while in bypass mode. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAM…	column	Volts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.13`
tlpUpsConfigColdStart This option enables or disables the ability to turn the ups on without AC supplied. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAM…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.14`
tlpUpsConfigFaultAction Determines the action to take if the output needs to be shut down due to a fault condition, limited by the type of fault incurred. When configured for bypass(0), the ups will go t…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.16`
tlpUpsConfigOffMode This option governs what mode the ups should go into when AC input is available, but the load is either off or not battery backed up. If this setting is configured for bypass(1), …	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.17`
tlpUpsConfigLineSensitivity Adjusts the AC line voltage sensitivity setting. If this value is not supported by the ups, then this value will always return ERROR_NO_SUCH_NAME.	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.18`
tlpUpsConfigInputFrequency The nominal input frequency. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the req…	column	0.1 Hertz SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.2`
tlpUpsConfigOutputVoltage The nominal value of the output voltage. This value may not be supported on all models. If not supported, the agent reports ERROR_NO_SUCH_NAME. This value may not be writable on a…	column	Volts SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.3`
tlpUpsConfigOutputFrequency The nominal output frequency. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the re…	column	0.1 Hertz SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.4`
tlpUpsConfigAudibleStatus The requested state of the audible alarm. When in the disabled state, the audible alarm should never sound. The enabled state is self- describing. Setting this object to muted(3) …	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.5`
tlpUpsConfigAutoBatteryTest When disabled(0), the ups will not perform an automatic battery selftest. When set to another value, the ups will perform an automatic selftest in the approximate period defined b…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.6`
tlpUpsConfigAutoRestartAfterShutdown When enabled(1), the ups should autorestart after a shutdown from battery mode if valid AC is applied. When disabled(0), the ups should not autorestart when AC is restored and ins…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.7`
tlpUpsConfigAutoRampOnTransition When enabled(1), the ups should perform its preconfigured ramp sequence when valid AC is restored while in battery mode. If this value is not supported by the ups, then this value…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.8`
tlpUpsConfigAutoShedOnTransition When enabled(1), the ups should perform its preconfigured shed sequence when valid AC is lost causing the ups to enter battery mode. If this value is not supported by the ups, the…	column	Enumeration	`.1.3.6.1.4.1.850.1.1.3.1.5.1.1.9`