tmnxRadiusUserStatsTable

TIMETRA-SECURITY-MIB · .1.3.6.1.4.1.6527.3.1.2.22.6.18

MIB view Table view

Object

table

The tmnxRadiusUserStatsTable is the Radius server statistics per user
using specific policy.
          
Entries are created and deleted by the system.

Context

MIB: TIMETRA-SECURITY-MIB
OID: .1.3.6.1.4.1.6527.3.1.2.22.6.18
Type: table
Status: current
Parent: tmnxRadiusInfo
Siblings: 18
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
tmnxRadiusAdminStatus The desired administrative status of the RADIUS protocol operation.	scalar	TIMETRA-TC-MIBTmnxAdminStateUpDown	`.1.3.6.1.4.1.6527.3.1.2.22.6.1`
tmnxRadiusPEDiscovery obsolete The value of tmnxRadiusPEDiscovery specifies whether RADIUS provider edge discovery is enabled for VPLS services. This object was made obsolete in release 5.0.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.22.6.10`
tmnxRadiusPEDiscoveryPassword obsolete The value of tmnxRadiusPEDiscoveryPassword is used when contacting the RADIUS server for VPLS auto-discovery. This object was made obsolete in release 5.0.	scalar	OctetString	`.1.3.6.1.4.1.6527.3.1.2.22.6.11`
tmnxRadiusPEDiscoveryInterval obsolete The value of tmnxRadiusPEDiscoveryInterval specifies the polling interval for Radius PE discovery in minutes. This object was made obsolete in release 5.0.	scalar	minutes Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.22.6.12`
tmnxRadiusPEForceDiscovery When tmnxRadiusPEForceDiscovery is set to 'doAction', the RADIUS server is immediately contacted to attempt discovery.	scalar	TIMETRA-TC-MIBTmnxActionType	`.1.3.6.1.4.1.6527.3.1.2.22.6.13`
tmnxRadiusPEForceDiscoverySvcId The value of tmnxRadiusPEForceDiscoverySvcId specifies a specific service ID to query the RADIUS server about. Reading this object returns the value 0.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.6527.3.1.2.22.6.14`
tmnxRadiusAccountingPort The UDP port number on which to contact the RADIUS server for accounting requests.	scalar	Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.22.6.15`
tmnxRadiusUseTemplate The value of tmnxRadiusUseTemplate specifies whether the RADIUS user template is actively applied to the RADIUS user if no VSAs are returned with the auth-accept from the RADIUS s…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.22.6.16`
tmnxRadiusAuthAlgorithm The value of tmnxRadiusAuthAlgorithm specifies the algorithm used to select a RADIUS server from the list of configured servers (tmnxRadiusServerTable).	scalar	TIMETRA-TC-MIBTmnxSecRadiusServAlgorithm	`.1.3.6.1.4.1.6527.3.1.2.22.6.17`
tmnxRadiusInteractiveAuthen The value of tmnxRadiusInteractiveAuthen specifies whether challenge/response authentication is enabled. If the value of this object is set to 'true(1)', the Reply-Mess…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.22.6.19`
tmnxRadiusAccounting When the value of tmnxRadiusAccounting is set to 'TRUE', RADIUS command accounting is enabled.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.22.6.2`
tmnxRadiusAuthorization When the value of tmnxRadiusAuthorization is set to 'TRUE', RADIUS command authorization is enabled.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.22.6.3`
tmnxRadiusRetryAttempts Number of attempts to retry contacting the RADIUS server.	scalar	Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.22.6.4`
tmnxRadiusTimeout Number of seconds to wait before timing out a RADIUS server.	scalar	Seconds Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.22.6.5`
tmnxRadiusPort The UDP port number on which to contact the RADIUS server.	scalar	Unsigned32	`.1.3.6.1.4.1.6527.3.1.2.22.6.6`
tmnxRadiusServerTable The tmnxRadiusServerEntry has an entry for each RADIUS server. The table can have up to a maximum of 5 entries.	table	-	`.1.3.6.1.4.1.6527.3.1.2.22.6.7`
tmnxRadiusSourceAddress obsolete tmnxRadiusSourceAddress is used to configure the source address of the Radius packet. It should be a valid unicast address. If this object is configured with the addres…	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.6527.3.1.2.22.6.8`
tmnxRadiusConfigured obsolete When the value of tmnxRadiusConfigured is set to 'false', all the Radius objects under the tmnxRadiusInfo tree will be set to their default values and all the rows in the tmnxRadi…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.6527.3.1.2.22.6.9`

Child Objects