tmnxRadiusPEDiscoveryPassword
TIMETRA-SECURITY-MIB ·
.1.3.6.1.4.1.6527.3.1.2.22.6.11
Object
scalar
obsolete
r/w
OctetString
The value of tmnxRadiusPEDiscoveryPassword is used when contacting the
RADIUS server for VPLS auto-discovery.
This object was made obsolete in release 5.0.
Context
- MIB
- TIMETRA-SECURITY-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.22.6.11- Type
- scalar
- Access
- readwrite
- Status
- obsolete
- Parent
- tmnxRadiusInfo
- Siblings
- 18
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxRadiusAdminStatus The desired administrative status of the RADIUS protocol operation. | scalar | TIMETRA-TC-MIBTmnxAdminStateUpDown | .1.3.6.1.4.1.6527.3.1.2.22.6.1 |
| tmnxRadiusPEDiscovery obsolete The value of tmnxRadiusPEDiscovery specifies whether RADIUS provider
edge discovery is enabled for VPLS services.
This object was made obsolete in release 5.0. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.6.10 |
| tmnxRadiusPEDiscoveryInterval obsolete The value of tmnxRadiusPEDiscoveryInterval specifies the polling
interval for Radius PE discovery in minutes.
This object was made obsolete in release 5.0. | scalar | minutes Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.6.12 |
| tmnxRadiusPEForceDiscovery When tmnxRadiusPEForceDiscovery is set to 'doAction', the RADIUS
server is immediately contacted to attempt discovery. | scalar | TIMETRA-TC-MIBTmnxActionType | .1.3.6.1.4.1.6527.3.1.2.22.6.13 |
| tmnxRadiusPEForceDiscoverySvcId The value of tmnxRadiusPEForceDiscoverySvcId specifies a specific
service ID to query the RADIUS server about.
Reading this object returns the value 0. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.6.14 |
| tmnxRadiusAccountingPort The UDP port number on which to contact the RADIUS server for
accounting requests. | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.6.15 |
| tmnxRadiusUseTemplate The value of tmnxRadiusUseTemplate specifies whether the RADIUS user
template is actively applied to the RADIUS user if no VSAs are
returned with the auth-accept from the RADIUS s… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.6.16 |
| tmnxRadiusAuthAlgorithm The value of tmnxRadiusAuthAlgorithm specifies the algorithm used to
select a RADIUS server from the list of configured servers
(tmnxRadiusServerTable). | scalar | TIMETRA-TC-MIBTmnxSecRadiusServAlgorithm | .1.3.6.1.4.1.6527.3.1.2.22.6.17 |
| tmnxRadiusUserStatsTable The tmnxRadiusUserStatsTable is the Radius server statistics per user
using specific policy.
Entries are created and deleted by the system. | table | - | .1.3.6.1.4.1.6527.3.1.2.22.6.18 |
| tmnxRadiusInteractiveAuthen The value of tmnxRadiusInteractiveAuthen specifies whether
challenge/response authentication is enabled.
If the value of this object is set to 'true(1)', the Reply-Mess… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.6.19 |
| tmnxRadiusAccounting When the value of tmnxRadiusAccounting is set to 'TRUE', RADIUS
command accounting is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.6.2 |
| tmnxRadiusAuthorization When the value of tmnxRadiusAuthorization is set to 'TRUE', RADIUS
command authorization is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.6.3 |
| tmnxRadiusRetryAttempts Number of attempts to retry contacting the RADIUS server. | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.6.4 |
| tmnxRadiusTimeout Number of seconds to wait before timing out a RADIUS server. | scalar | Seconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.6.5 |
| tmnxRadiusPort The UDP port number on which to contact the RADIUS server. | scalar | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.22.6.6 |
| tmnxRadiusServerTable The tmnxRadiusServerEntry has an entry for each RADIUS server. The
table can have up to a maximum of 5 entries. | table | - | .1.3.6.1.4.1.6527.3.1.2.22.6.7 |
| tmnxRadiusSourceAddress obsolete tmnxRadiusSourceAddress is used to configure the source address of the
Radius packet. It should be a valid unicast address.
If this object is configured with the addres… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6527.3.1.2.22.6.8 |
| tmnxRadiusConfigured obsolete When the value of tmnxRadiusConfigured is set to 'false', all the
Radius objects under the tmnxRadiusInfo tree will be set to their
default values and all the rows in the tmnxRadi… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.22.6.9 |