tmnxRadiusAuthAlgorithm

TIMETRA-SECURITY-MIB · .1.3.6.1.4.1.6527.3.1.2.22.6.17
MIB view Table view

Object

scalar r/w TIMETRA-TC-MIBTmnxSecRadiusServAlgorithm 
The value of tmnxRadiusAuthAlgorithm specifies the algorithm used to
select a RADIUS server from the list of configured servers
(tmnxRadiusServerTable).

Context

MIB
TIMETRA-SECURITY-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.22.6.17
Type
scalar
Access
readwrite
Status
current
Parent
tmnxRadiusInfo
Siblings
18

Syntax

TIMETRA-TC-MIBTmnxSecRadiusServAlgorithm
Source
TIMETRA-TC-MIBTmnxSecRadiusServAlgorithm
Base type
Enumeration

Values & Constraints

Type Values
1direct
2round-robin

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tmnxRadiusAdminStatus
The desired administrative status of the RADIUS protocol operation.
scalarTIMETRA-TC-MIBTmnxAdminStateUpDown.1.3.6.1.4.1.6527.3.1.2.22.6.1
tmnxRadiusPEDiscovery obsolete
The value of tmnxRadiusPEDiscovery specifies whether RADIUS provider edge discovery is enabled for VPLS services. This object was made obsolete in release 5.0.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.10
tmnxRadiusPEDiscoveryPassword obsolete
The value of tmnxRadiusPEDiscoveryPassword is used when contacting the RADIUS server for VPLS auto-discovery. This object was made obsolete in release 5.0.
scalarOctetString.1.3.6.1.4.1.6527.3.1.2.22.6.11
tmnxRadiusPEDiscoveryInterval obsolete
The value of tmnxRadiusPEDiscoveryInterval specifies the polling interval for Radius PE discovery in minutes. This object was made obsolete in release 5.0.
scalarminutes Unsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.12
tmnxRadiusPEForceDiscovery
When tmnxRadiusPEForceDiscovery is set to 'doAction', the RADIUS server is immediately contacted to attempt discovery.
scalarTIMETRA-TC-MIBTmnxActionType.1.3.6.1.4.1.6527.3.1.2.22.6.13
tmnxRadiusPEForceDiscoverySvcId
The value of tmnxRadiusPEForceDiscoverySvcId specifies a specific service ID to query the RADIUS server about. Reading this object returns the value 0.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.14
tmnxRadiusAccountingPort
The UDP port number on which to contact the RADIUS server for accounting requests.
scalarUnsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.15
tmnxRadiusUseTemplate
The value of tmnxRadiusUseTemplate specifies whether the RADIUS user template is actively applied to the RADIUS user if no VSAs are returned with the auth-accept from the RADIUS s…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.16
tmnxRadiusUserStatsTable
The tmnxRadiusUserStatsTable is the Radius server statistics per user using specific policy. Entries are created and deleted by the system.
table-.1.3.6.1.4.1.6527.3.1.2.22.6.18
tmnxRadiusInteractiveAuthen
The value of tmnxRadiusInteractiveAuthen specifies whether challenge/response authentication is enabled. If the value of this object is set to 'true(1)', the Reply-Mess…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.19
tmnxRadiusAccounting
When the value of tmnxRadiusAccounting is set to 'TRUE', RADIUS command accounting is enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.2
tmnxRadiusAuthorization
When the value of tmnxRadiusAuthorization is set to 'TRUE', RADIUS command authorization is enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.3
tmnxRadiusRetryAttempts
Number of attempts to retry contacting the RADIUS server.
scalarUnsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.4
tmnxRadiusTimeout
Number of seconds to wait before timing out a RADIUS server.
scalarSeconds Unsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.5
tmnxRadiusPort
The UDP port number on which to contact the RADIUS server.
scalarUnsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.6
tmnxRadiusServerTable
The tmnxRadiusServerEntry has an entry for each RADIUS server. The table can have up to a maximum of 5 entries.
table-.1.3.6.1.4.1.6527.3.1.2.22.6.7
tmnxRadiusSourceAddress obsolete
tmnxRadiusSourceAddress is used to configure the source address of the Radius packet. It should be a valid unicast address. If this object is configured with the addres…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.6527.3.1.2.22.6.8
tmnxRadiusConfigured obsolete
When the value of tmnxRadiusConfigured is set to 'false', all the Radius objects under the tmnxRadiusInfo tree will be set to their default values and all the rows in the tmnxRadi…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.9