tmnxRadiusSourceAddress

TIMETRA-SECURITY-MIB · .1.3.6.1.4.1.6527.3.1.2.22.6.8
MIB view Table view

Object

scalar obsolete r/w SNMPv2-SMIIpAddress 
tmnxRadiusSourceAddress is used to configure the source address of the
Radius packet. It should be a valid unicast address.
          
If this object is configured with the address of the router interface,
the Radius client uses it while making a request to the server.
          
If the address is not configured or is not the address of the one of
interfaces, the source address is based on the address of the Radius
server. If the server address is in-band, the client uses the system
ip address. If it is out-of-band, the source address is the address of
the management interface.
          
tmnxRadiusSourceAddress was made obsolete in the 4.0 revision of
Nokia SROS series systems.  The source address of the Radius
packet can now be set by creating a tmnxSourceIPEntry for Radius
application in the tmnxSourceIPTable.

Context

MIB
TIMETRA-SECURITY-MIB
OID
.1.3.6.1.4.1.6527.3.1.2.22.6.8
Type
scalar
Access
readwrite
Status
obsolete
Parent
tmnxRadiusInfo
Siblings
18

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tmnxRadiusAdminStatus
The desired administrative status of the RADIUS protocol operation.
scalarTIMETRA-TC-MIBTmnxAdminStateUpDown.1.3.6.1.4.1.6527.3.1.2.22.6.1
tmnxRadiusPEDiscovery obsolete
The value of tmnxRadiusPEDiscovery specifies whether RADIUS provider edge discovery is enabled for VPLS services. This object was made obsolete in release 5.0.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.10
tmnxRadiusPEDiscoveryPassword obsolete
The value of tmnxRadiusPEDiscoveryPassword is used when contacting the RADIUS server for VPLS auto-discovery. This object was made obsolete in release 5.0.
scalarOctetString.1.3.6.1.4.1.6527.3.1.2.22.6.11
tmnxRadiusPEDiscoveryInterval obsolete
The value of tmnxRadiusPEDiscoveryInterval specifies the polling interval for Radius PE discovery in minutes. This object was made obsolete in release 5.0.
scalarminutes Unsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.12
tmnxRadiusPEForceDiscovery
When tmnxRadiusPEForceDiscovery is set to 'doAction', the RADIUS server is immediately contacted to attempt discovery.
scalarTIMETRA-TC-MIBTmnxActionType.1.3.6.1.4.1.6527.3.1.2.22.6.13
tmnxRadiusPEForceDiscoverySvcId
The value of tmnxRadiusPEForceDiscoverySvcId specifies a specific service ID to query the RADIUS server about. Reading this object returns the value 0.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.14
tmnxRadiusAccountingPort
The UDP port number on which to contact the RADIUS server for accounting requests.
scalarUnsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.15
tmnxRadiusUseTemplate
The value of tmnxRadiusUseTemplate specifies whether the RADIUS user template is actively applied to the RADIUS user if no VSAs are returned with the auth-accept from the RADIUS s…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.16
tmnxRadiusAuthAlgorithm
The value of tmnxRadiusAuthAlgorithm specifies the algorithm used to select a RADIUS server from the list of configured servers (tmnxRadiusServerTable).
scalarTIMETRA-TC-MIBTmnxSecRadiusServAlgorithm.1.3.6.1.4.1.6527.3.1.2.22.6.17
tmnxRadiusUserStatsTable
The tmnxRadiusUserStatsTable is the Radius server statistics per user using specific policy. Entries are created and deleted by the system.
table-.1.3.6.1.4.1.6527.3.1.2.22.6.18
tmnxRadiusInteractiveAuthen
The value of tmnxRadiusInteractiveAuthen specifies whether challenge/response authentication is enabled. If the value of this object is set to 'true(1)', the Reply-Mess…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.19
tmnxRadiusAccounting
When the value of tmnxRadiusAccounting is set to 'TRUE', RADIUS command accounting is enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.2
tmnxRadiusAuthorization
When the value of tmnxRadiusAuthorization is set to 'TRUE', RADIUS command authorization is enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.3
tmnxRadiusRetryAttempts
Number of attempts to retry contacting the RADIUS server.
scalarUnsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.4
tmnxRadiusTimeout
Number of seconds to wait before timing out a RADIUS server.
scalarSeconds Unsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.5
tmnxRadiusPort
The UDP port number on which to contact the RADIUS server.
scalarUnsigned32.1.3.6.1.4.1.6527.3.1.2.22.6.6
tmnxRadiusServerTable
The tmnxRadiusServerEntry has an entry for each RADIUS server. The table can have up to a maximum of 5 entries.
table-.1.3.6.1.4.1.6527.3.1.2.22.6.7
tmnxRadiusConfigured obsolete
When the value of tmnxRadiusConfigured is set to 'false', all the Radius objects under the tmnxRadiusInfo tree will be set to their default values and all the rows in the tmnxRadi…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.3.1.2.22.6.9